git annex testremote passes.
exportree not implemented yet, although the documentation talks about it,
since it will be the main way this remote will be used.
The adb push/pull progress is displayed for now; it would be better
to consume it and use it to update the git-annex progress bar.
This commit was sponsored by andrea rota.
Was trying to rmdir the file, which had already been deleted, and when that
failed, it skipped trying to delete the parent directories.
Noticed the bug through testremote, but it can't itself detect such
problems as there is no enumeration in the API.
This commit was sponsored by Brock Spratlen on Patreon.
New table needed to look up what filenames are used in the currently
exported tree, for reasons explained in export.mdwn.
Also, added smart constructors for ExportLocation and ExportDirectory to
make sure they contain filepaths with the right direction slashes.
And some code refactoring.
This commit was sponsored by Francois Marier on Patreon.
Not yet called by Command.Export.
WebDAV needs this to clean up empty collections. Also, example.sh turned
out to not be cleaning up directories when removing content
from them, so it made sense for it to use this.
Remote.Directory did not need it, and since its cleanup method for empty
directories is more efficient than what Command.Export will need to do
to find empty directories, it uses Nothing so that extra work can be
avoided.
This commit was sponsored by Thom May on Patreon.
Don't allow "exporttree=yes" to be set when the special remote
does not support exports. That would be confusing since the user would
set up a special remote for exports, but `git annex export` to it would
later fail.
This commit was supported by the NSF-funded DataLad project.
Straightforward enough, except for the needed belt-and-suspenders sanity
checks to avoid foot shooting due to exports not being key/value stores.
* Even when annex.verify=false, always verify from exports.
* Only get files from exports that use a backend that supports
checksum verification.
* Never trust exports, even if the user says to, because then
`git annex drop` would drop content if the export seemed to contain
a copy.
This commit was supported by the NSF-funded DataLad project.
* Only export to remotes that were initialized to support it.
* Prevent storing key/value on export remotes.
* Prevent enabling exporttree=yes and encryption in the same remote.
SetupStage Enable was changed to take the old RemoteConfig.
This allowed only setting exporttree when initially setting up a
remote, and not configuring it later after stuff might already be stored
in the remote.
Went with =yes rather than =true for consistency with other parts of
git-annex. Changed docs accordingly.
This commit was supported by the NSF-funded DataLad project.
This will allow disabling exports for remotes that are not configured to
allow them. Also, exportSupported will be useful for the external
special remote to probe.
This commit was supported by the NSF-funded DataLad project
This avoids needing to deal with the complexity of partially transferred
files in the export. We'd not be able to resume uploading to such a file
anyway, so just avoid them.
The implementation in Remote.Directory is not completely ideal, because
it could leave the temp file hanging around in the export directory.
This only happens if it's killed with -9, or there's a power failure;
normally viaTmp cleans up after itself, even when interrupted. I could
not see a better way to do it though, since the export directory might
be the root of a filesystem.
Also some design thoughts on resuming, which depend on storeExport being
atomic.
This commit was sponsored by Fernando Jimenez on Partreon.
Rather than providing the key to export, provide the file.
When exporting a treeish that contains files that are not annexed,
this will let the content of those files also be exported.
There's still a Key in the interface; it will be used by the external
special remote protocol. A SHA1 key can be used when exporting
non-annexed files.
This commit was sponsored by Brock Spratlen on Patreon.
Implemented so far for the directory special remote.
Several remotes don't make sense to export to. Regular Git remotes,
obviously, do not. Bup remotes almost certianly do not, since bup would
need to be used to extract the export; same store for Ddar. Web and
Bittorrent are download-only. GCrypt is always encrypted so exporting to
it would be pointless. There's probably no point complicating the Hook
remotes with exporting at this point. External, S3, Glacier, WebDAV,
Rsync, and possibly Tahoe should be modified to support export.
Thought about trying to reuse the storeKey/retrieveKeyFile/removeKey
interface, rather than adding a new interface. But, it seemed better to
keep it separate, to avoid a complicated interface that sometimes
encrypts/chunks key/value storage and sometimes users non-key/value
storage. Any common parts can be factored out.
Note that storeExport is not atomic.
doc/design/exporting_trees_to_special_remotes.mdwn has some things in
the "resuming exports" section that bear on this decision. Basically,
I don't think, at this time, that an atomic storeExport would help with
resuming, because exports are not key/value storage, and we can't be
sure that a partially uploaded file is the same content we're currently
trying to export.
Also, note that ExportLocation will always use unix path separators.
This is important, because users may export from a mix of windows and
unix, and it avoids complicating the API with path conversions,
and ensures that in such a mix, they always use the same locations for
exports.
This commit was sponsored by Bruno BEAUFILS on Patreon.
Most remotes have an idempotent setup that can be reused for
enableremote, but in a few cases, it needs to tell which, and whether
a UUID was provided to setup was used.
This is groundwork for making initremote be able to provide a UUID.
It should not change any behavior.
Note that it would be nice to make the UUID always be provided to setup,
and make setup not need to generate and return a UUID. What prevented
this simplification is Remote.Git.gitSetup, which needs to reuse the
UUID of the git remote when setting it up, and so has to return that
UUID.
This commit was sponsored by Thom May on Patreon.
ghc 8 added backtraces on uncaught errors. This is great, but git-annex was
using error in many places for a error message targeted at the user, in
some known problem case. A backtrace only confuses such a message, so omit it.
Notably, commands like git annex drop that failed due to eg, numcopies,
used to use error, so had a backtrace.
This commit was sponsored by Ethan Aubin.
Removed the instance LensGpgEncParams RemoteConfig because it encouraged
code that does not take the RemoteGitConfig into account.
RemoteType's setup was changed to take a RemoteGitConfig,
although the only place that is able to provide a non-empty one is
enableremote, when it's changing an existing remote. This led to several
folow-on changes, and got RemoteGitConfig plumbed through.
Now it suffices to run git remote add, followed by git-annex sync. Now the
remote is automatically initialized for use by git-annex, where before the
git-annex branch had to manually be pushed before using git-annex sync.
Note that this involved changes to git-annex-shell, so if the remote is
using an old version, the manual push is still needed.
Implementation required git-annex-shell be changed, so configlist can
autoinit a repository even when no git-annex branch has been pushed yet.
Unfortunate because we'll have to wait for it to get deployed to servers
before being able to rely on this change in the documentation.
Did consider making git-annex sync push the git-annex branch to repos that
didn't have a uuid, but this seemed difficult to do without complicating it
in messy ways.
It would be cleaner to split a command out from configlist to handle
the initialization. But this is difficult without sacrificing backwards
compatability, for users of old git-annex versions which would not use the
new command.
The directory special remote was not affected in its normal configuration,
since annex-directory is an absolute path normally. But it could fail
when a relative path was used.
The git remote was affected even when an absolute path to it was used in
.git/config, since git-annex now converts all such paths to relative.
Reverts 965e106f24
Unfortunately, this caused breakage on Windows, and possibly elsewhere,
because parentDir and takeDirectory do not behave the same when there is a
trailing directory separator.
parentDir is less safe than takeDirectory, especially when working
with relative FilePaths. It's really only useful in loops that
want to terminate at /
This commit was sponsored by Audric SCHILTKNECHT.
Now `git annex info $remote` shows info specific to the type of the remote,
for example, it shows the rsync url.
Remote types that support encryption or chunking also include that in their
info.
This commit was sponsored by Ævar Arnfjörð Bjarmason.
encryptionSetup must be called before setRemoteCredPair. Otherwise,
the RemoteConfig doesn't have the cipher in it, and so no cipher is used to
encrypt the embedded creds.
This is a security fix for non-shared encryption methods!
For encryption=shared, there's no security problem, just an
inconsistentency in whether the embedded creds are encrypted.
This is very important to get right, so used some types to help ensure that
setRemoteCredPair is only run after encryptionSetup. Note that the external
special remote bypasses the type safety, since creds can be set after the
initial remote config, if the external special remote program requests it.
Also note that IA remotes never use encryption, so encryptionSetup is not
run for them at all, and again the type safety is bypassed.
This leaves two open questions:
1. What to do about S3 and glacier remotes that were set up
using encryption=pubkey/hybrid with embedcreds?
Such a git repo has a security hole embedded in it, and this needs to be
communicated to the user. Is the changelog enough?
2. enableremote won't work in such a repo, because git-annex will
try to decrypt the embedded creds, which are not encrypted, so fails.
This needs to be dealt with, especially for ecryption=shared repos,
which are not really broken, just inconsistently configured.
Noticing that problem for encryption=shared is what led to commit
fbdeeeed5f, which tried to
fix the problem by not decrypting the embedded creds.
This commit was sponsored by Josh Taylor.
Added a mkUnavailable method, which a Remote can use to generate a version
of itself that is not available. Implemented for several, but not yet all
remotes.
This allows testing that checkPresent properly throws an exceptions when
it cannot check if a key is present or not. It also allows testing that the
other methods don't throw exceptions in these circumstances.
This immediately found several bugs, which this commit also fixes!
* git remotes using ssh accidentially had checkPresent return
an exception, rather than throwing it
* The chunking code accidentially returned False rather than
propigating an exception when there were no chunks and
checkPresent threw an exception for the non-chunked key.
This commit was sponsored by Carlo Matteo Capocasa.
This will allow special remotes to eg, open a http connection and reuse it,
while checking if chunks are present, or removing chunks.
S3 and WebDAV both need this to support chunks with reasonable speed.
Note that a special remote might want to cache a http connection across
multiple requests. A simple case of this is that CheckPresent is typically
called before Store or Remove. A remote using this interface can certianly
use a Preparer that eg, uses a MVar to cache a http connection.
However, it's up to the remote to then deal with things like stale or
stalled http connections when eg, doing a series of downloads from a remote
and other places. There could be long delays between calls to a remote,
which could lead to eg, http connection stalls; the machine might even
move to a new network, etc.
It might be nice to improve this interface later to allow
the simple case without needing to handle the full complex case.
One way to do it would be to have a `Transaction SpecialRemote cache`,
where SpecialRemote contains methods for Storer, Retriever, Remover, and
CheckPresent, that all expect to be passed a `cache`.
I tend to prefer moving toward explicit exception handling, not away from
it, but in this case, I think there are good reasons to let checkPresent
throw exceptions:
1. They can all be caught in one place (Remote.hasKey), and we know
every possible exception is caught there now, which we didn't before.
2. It simplified the code of the Remotes. I think it makes sense for
Remotes to be able to be implemented without needing to worry about
catching exceptions inside them. (Mostly.)
3. Types.StoreRetrieve.Preparer can only work on things that return a
Bool, which all the other relevant remote methods already did.
I do not see a good way to generalize that type; my previous attempts
failed miserably.
Make the byteRetriever be passed the callback that consumes the bytestring.
This way, there's no worries about the lazy bytestring not all being read
when the resource that's creating it is closed.
Which in turn lets bup, ddar, and S3 each switch from using an unncessary
fileRetriver to a byteRetriever. So, more efficient on chunks and encrypted
files.
The only remaining fileRetrievers are hook and external, which really do
retrieve to files.
The forall a. in Preparer made resourcePrepare not seem to be usable, so
I specialized a to Bool. Which works for both Preparer Storer and
Preparer Retriever, but wouldn't let the Preparer be used for hasKey
as it currently stands.
Needed for eg, Remote.External.
Generally, any Retriever that stores content in a file is responsible for
updating the meter, while ones that procude a lazy bytestring cannot update
the meter, so are not asked to.
Some remotes like External need to run store and retrieve actions in Annex,
not IO. In order to do that lift, I had to dive pretty deep into the
utilities, making Utility.Gpg and Utility.Tmp be partly converted to using
MonadIO, and Control.Monad.Catch for exception handling.
There should be no behavior changes in this commit.
This commit was sponsored by Michael Barabanov.
This will allow things like WebDAV to opean a single persistent connection
and reuse it for all the chunked data.
The crazy types allow for some nice code reuse.
Push it down from needing to be done in every Storer,
to being checked once inside ChunkedEncryptable.
Also, catch exceptions from PrepareStorer and PrepareRetriever,
just in case..
Moved old legacy chunking code, and cleaned up the directory and webdav
remotes use of it, so when no chunking is configured, that code is not
used.
The config for new style chunking will be chunk=1M instead of chunksize=1M.
There should be no behavior changes from this commit.
This commit was sponsored by Andreas Laas.
I think both of these are all that's affected, but I went ahead and fixed
all the remotes that set their config to M.empty to instead store the
actual config. Who knows what will expect it to be actually present in
future, the Remote instance of getGpgEncParams came to..
Currently only implemented for local git remotes. May try to add support
to git-annex-shell for ssh remotes later. Could concevably also be
supported by some special remote, although that seems unlikely.
Cronner user this when available, and when not falls back to
fsck --fast --from remote
git annex fsck --from does not itself use this interface.
To do so, I would need to pass --fast and all other options that influence
fsck on to the git annex fsck that it runs inside the remote. And that
seems like a lot of work for a result that would be no better than
cd remote; git annex fsck
This may need to be revisited if git-annex-shell gets support, since it
may be the case that the user cannot ssh to the server to run git-annex
fsck there, but can run git-annex-shell there.
This commit was sponsored by Damien Diederen.
To support this, a core.gcrypt-id is stored by git-annex inside the git
config of a local gcrypt repository, when setting it up.
That is compared with the remote's cached gcrypt-id. When different, a
drive has been changed. git-annex then looks up the remote config for
the uuid mapped from the core.gcrypt-id, and tweaks the configuration
appropriately. When there is no known config for the uuid, it will refuse to
use the remote.
This is a git-remote-gcrypt encrypted special remote. Only sending files
in to the remote works, and only for local repositories.
Most of the work so far has involved making initremote work. A particular
problem is that remote setup in this case needs to generate its own uuid,
derivied from the gcrypt-id. That required some larger changes in the code
to support.
For ssh remotes, this will probably just reuse Remote.Rsync's code, so
should be easy enough. And for downloading from a web remote, I will need
to factor out the part of Remote.Git that does that.
One particular thing that will need work is supporting hot-swapping a local
gcrypt remote. I think it needs to store the gcrypt-id in the git config of the
local remote, so that it can check it every time, and compare with the
cached annex-uuid for the remote. If there is a mismatch, it can change
both the cached annex-uuid and the gcrypt-id. That should work, and I laid
some groundwork for it by already reading the remote's config when it's
local. (Also needed for other reasons.)
This commit was sponsored by Daniel Callahan.
With the initremote parameters "encryption=pubkey keyid=788A3F4C".
/!\ Adding or removing a key has NO effect on files that have already
been copied to the remote. Hence using keyid+= and keyid-= with such
remotes should be used with care, and make little sense unless the point
is to replace a (sub-)key by another. /!\
Also, a test case has been added to ensure that the cipher and file
contents are encrypted as specified by the chosen encryption scheme.
Most remotes have meters in their implementations of retrieveKeyFile
already. Simply hooking these up to the transfer log makes that information
available. Easy peasy.
This is particularly valuable information for encrypted remotes, which
otherwise bypass the assistant's polling of temp files, and so don't have
good progress bars yet.
Still some work to do here (see progressbars.mdwn changes), but this
is entirely an improvement from the lack of progress bars for encrypted
downloads.
There was confusion in different parts of the progress bar code about
whether an update contained the total number of bytes transferred, or the
number of bytes transferred since the last update. One way this bug
showed up was progress bars that seemed to stick at zero for a long time.
In order to fix it comprehensively, I add a new BytesProcessed data type,
that is explicitly a total quantity of bytes, not a delta.
Note that this doesn't necessarily fix every problem with progress bars.
Particularly, buffering can now cause progress bars to seem to run ahead
of transfers, reaching 100% when data is still being uploaded.
git annex init probes for crippled filesystems, and sets direct mode, as
well as `annex.crippledfilesystem`.
Avoid manipulating permissions of files on crippled filesystems.
That would likely cause an exception to be thrown.
Very basic support in Command.Add for cripped filesystems; avoids the lock
down entirely since doing it needs both permissions and hard links.
Will make this better soon.
Ensure that each file has something written to it, even if the bytestring
chunk size is greater than the configured chunksize.
This means we may write a bit larger than the configured value, but only
when the configured value is very small; ie, < 8 kb.
Files are now written to a tmp directory in the remote, and once all
chunks are written, etc, it's moved into the final place atomically.
For now, checkpresent still checks every single chunk of a file, because
the old method could leave partially transferred files with some chunks
present and others not.
Both the directory and webdav special remotes used to have to buffer
the whole file contents before it could be decrypted, as they read
from chunks. Now the chunks are streamed through gpg with no buffering.
Transfer info files are updated when the callback is called, updating
the number of bytes transferred.
Left unused p variables at every place the callback should be used.
Which is rather a lot..
Currently only the web special remote is readonly, but it'd be possible to
also have readonly drives, or other remotes. These are handled in the
assistant by only downloading from them, and never trying to upload to
them.
