This solves the problem of sameas remotes trampling over per-remote
state. Used for:
* per-remote state, of course
* per-remote metadata, also of course
* per-remote content identifiers, because two remote implementations
could in theory generate the same content identifier for two different
peices of content
While chunk logs are per-remote data, they don't use this, because the
number and size of chunks stored is a common property across sameas
remotes.
External special remote had a complication, where it was theoretically
possible for a remote to send SETSTATE or GETSTATE during INITREMOTE or
EXPORTSUPPORTED. Since the uuid of the remote is typically generate in
Remote.setup, it would only be possible to pass a Maybe
RemoteStateHandle into it, and it would otherwise have to construct its
own. Rather than go that route, I decided to send an ERROR in this case.
It seems unlikely that any existing external special remote will be
affected. They would have to make up a git-annex key, and set state for
some reason during INITREMOTE. I can imagine such a hack, but it doesn't
seem worth complicating the code in such an ugly way to support it.
Unfortunately, both TestRemote and Annex.Import needed the Remote
to have a new field added that holds its RemoteStateHandle.
I found a way to avoid inheritance complicating anything outside of
Logs.Remote. It seems fine to require all inherited values to be
inherited and not set in the sameas remote's config. Since inherited
values will be used for stuff like encryption and perhaps chunking, which
control the actual content stored on the remote, it seems likely that
there will not be any reason to need them to vary between two remotes
that access the same underlying data store.
The newer version of containers is free; the minimum ghc version is
bundled with a newer version than that.
Initremote sets that, so after both initremote and enableremote,
the git config will be set.
Any remote that does not use Annex.SpecialRemote won't set
annex-config-uuid. But that's only Remote.Git, which doesn't use
RemoteConfig anyway.
Had a report of close throwing ErrorBusy on CIFS.
Retrying up to 16 seconds is a balance between hopefully waiting long
enough for the problem to clear up and waiting so long that git-annex seems
to hang.
The new dependency is free; persistent depends on unliftio-core.
This is a special remote and a git remote at the same time; git can pull
and push to it and git-annex can use it as a special remote.
Remote.Git has to check if it's configured as a git-lfs special remote
and sets it up as one if so.
Object methods not implemented yet.
In 40ecf58d4b I changed the license of code I
wrote from GPL to AGPL. But, two files containing code I wrote combined
with code by others were updated to say their license is AGPL, while in
fact part of it was (the code I wrote) but part remained under the original
license (the code written by others).
Remote/Ddar.hs is now changed entirely back to GPL 3.
Annex/DirHashes.hs stays AGPL, but I broke out Utility/MD5.hs with the code
not written by me, and corrected its license statement to GPL-2, which
is the actual version of the GPL included with the code in its original
distribution at http://www.cs.ox.ac.uk/people/ian.lynagh/md5/
Drop support for building with ghc older than 8.4.4, and with older
versions of serveral haskell libraries than will be included in Debian 10.
The only remaining version ifdefs in the entire code base are now a couple
for aws!
This commit should only be merged after the Debian 10 release.
And perhaps it will need to wait longer than that; it would make
backporting new versions of git-annex to Debian 9 (stretch) which
has been actively happening as recently as this year.
This commit was sponsored by Ilya Shlyakhter.
The hash was actually not being fully evaluated before, used rnf to fix
that.
The added dependency on deepseq is a free dependency, because eg text
depends on it.
* Added mimeencoding= term to annex.largefiles expressions.
This is probably mostly useful to match non-text files with eg
"mimeencoding=binary"
* git-annex matchexpression: Added --mimeencoding option.
Added graftTree but it's buggy.
Should use graftTree in Annex.Branch.graftTreeish; it will be faster
than the current implementation there.
Started Annex.Import, but untested and it doesn't yet handle tree
grafting.
Does not yet have a way to update with new information from the
git-annex branch, which will be needed when multiple repos are importing
from the same remote.
List all current AGPL files in COPYRIGHT; several that were GPL have had
new AGPL code added.
In git-annex.cabal, use AGPL-3 as the overall license, since it's not
possible to build git-annex without AGPL code anymore.
Like with the network-uri split, cabal will automatically turn off the flag
when building with an old network.
I have not tested building with the new network-3.0.0.0 yet; several
other dependencies including aws are still pinned on network-2.*
* webapp: Remove configurator for box.com repository, since their
webdav support is going away at the end of this January.
* webapp: Remove configurator for gitlab, which stopped supporting git-annex
some time ago.
This commit was sponsored by Brock Spratlen on Patreon.
* Switch to using .git/annex/othertmp for tmp files other than partial
downloads, and make stale files left in that directory when git-annex
is interrupted be cleaned up promptly by subsequent git-annex processes.
* The .git/annex/misctmp directory is no longer used and git-annex will
delete anything lingering in there after it's 1 week old.
Also, in Annex.Ingest, made the filename it uses in the tmp dir be
prefixed with "ingest-" to avoid potentially using a filename used by
some other code.
Now there's a ByteString used all the way from disk to Key.
The main complication in this conversion was the use of fromInternalGitPath
in several places to munge things on Windows. The things that used that
were changed to parse the ByteString using either path separator.
Also some code that had read from files to a String lazily was changed
to read a minimal strict ByteString.
Install new git hooks in this version.
This does beg the question of what to do if git later gets eg a
post-smudge hook, that could run git-annex smudge --update. I think the
thing to do in that case would be to make git-annex smudge --update
install the new hooks. That way, as the user uses git-annex, the hook
would be created pretty quickly and without needing any extra syscalls
except for when git-annex smudge --update is called.
I considered doing something like that for installation of the
post-checkout and post-merge hooks, which would have avoided the need
for v7. But the only place it was cheap to do it would be in git-annex smudge
which could cheaply notice that smudge.log didn't exist yet and so know
the hooks needed to be installed. But since smudge used to populate pointer
files, it would be quite surprising if a single git checkout/merge failed
to update the work tree, and so that idea didn't work out.
The other reason for v7 is psychological -- users don't need to worry
about whether they might be running an old version of git-annex that
doesn't support their v7 repository very well. And bug reports about
"v6" have gotten a bit of a bad association in my head since they often
hit one of the known limitations and didn't realize it was experimental.
newtyped RepoVersion Int to avoid needing 2 comparisons in
versionSupportsUnlockedPointers etc. Also it's just nicer.
This commit was sponsored by John Pellman on Patreon.
The smuge filter no longer provides git with annexed file content, to
avoid a git memory leak, and because that did not honor annex.thin.
git annex smudge --update has to be run after a checkout to update
unlocked files in the working tree with annexed file contents.
No hooks yet to run it.
This commit was sponsored by Nick Piper on Patreon.
Both Command.Sync and Annex.Ingest had their own versions of this.
The one in Annex.Ingest used Git.Branch.currentUnsafe, but does not seem
to need it. That is only checking to see if it's in an adjusted unlocked
branch, and when in an adjusted branch, the branch does in fact exist,
so the added check that Git.Branch.current does is fine.
This commit was sponsored by Denis Dzyubenko on Patreon.
Running git-annex linux builds in termux seems to work well enough that the
only reason to keep the Android app would be to support Android 4-5, which
the old Android app supported, and which I don't know if the termux method
works on (although I see no reason why it would not).
According to [1], Android 4-5 remains on around 29% of devices, down from
51% one year ago.
[1] https://www.statista.com/statistics/271774/share-of-android-platforms-on-mobile-devices-with-android-os/
This is a rather large commit, but mostly very straightfoward removal of
android ifdefs and patches and associated cruft.
Also, removed support for building with very old ghc < 8.0.1, and with
yesod < 1.4.3, and without concurrent-output, which were only being used
by the cross build.
Some documentation specific to the Android app (screenshots etc) needs
to be updated still.
This commit was sponsored by Brett Eisenberg on Patreon.
In 2013, I wrote "Cryptohash benchmarks 90 to 101% faster than external
hashers". Re-benchmarking today, I found cryptonite's sha256 consistently
outperformed coreutils by 10% for large files. Tested 10 mb, 100 mb, 1 gb
files with both sha256 and sha512. And for smaller files, the external
process startup time swamps the hash time.
Perhaps cryptonite has improved. Or it could just do better on my
current CPU Intel(R) Pentium(R) CPU 4410Y @ 1.50GHz). Anyway, even if cryptonite
is slower in some situations, seems likely it would only be marginally slower;
it's got the same class of highly optimised C code under the hood as coreutils.
The main difference between the two sha256 implementations seems to be
how much of the inner loop they unroll..
This commit was sponsored by Henrik Riomar on Patreon.
Avoids annex.largefiles inconsitency and also avoids a lot of
unneccessary calls to the clean filter when a large repo's clone
is being initialized.
This commit was supported by the NSF-funded DataLad project.
Git uses pkt-line in the pack and http protocols, and for the long-running
filter processes protocol as well.
This should be a quite efficient parser and builder since it uses
attoparsec and bytestring-builder.
This adds a dependency on attoparsec, but it's a free dependency because
eg aeson depends on attoparsec and git-annex depends on aeson.
This commit was supported by the NSF-funded DataLad project.
per Peter Simons:
Setup.hs depends on 'transformers' for versions of base
prior to 4.9.x so that Control.Monad.IO.Class can be included. Just
adding the library to 'setup-depends' fixes the build with older
compilers like GHC 7.10.3.
For use in a security boundary enforcement.
Based on https://en.wikipedia.org/wiki/Reserved_IP_addresses
Including supporting IPv4 addresses embedded in IPv6 addresses. Because
while RFC6052 3.1 says "Address translators MUST NOT translate packets
in which an address is composed of the Well-Known Prefix and a non-
global IPv4 address; they MUST drop these packets", I don't want to
trust that implementations get that right when enforcing a security
boundary.
This commit was sponsored by John Pellman on Patreon.
This is a clean way to add IP address restrictions to http-client, and
any library using it.
See https://github.com/snoyberg/http-client/issues/354#issuecomment-397830259
Some code from http-client and http-client-tls was copied in and
modified. Credited its author accordingly, and used the same MIT license.
The restrictions don't apply to http proxies. If using http proxies is a
problem, http-client already has a way to disable them.
SOCKS support is not included. As far as I can tell, http-client-tls
does not support SOCKS by default, and so git-annex never has.
The additional dependencies are free; git-annex already transitively
depended on them via http-conduit.
This commit was sponsored by Eric Drechsel on Patreon.
