Only fsck and reinject and the test suite used the Backend, and they can
look it up as needed from the Key. This simplifies the code and also speeds
it up.
There is a small behavior change here. Before, all commands would warn when
acting on an annexed file with an unknown backend. Now, only fsck and
reinject show that warning.
unused: In direct mode, files that are deleted from the work tree are no longer incorrectly detected as unused.
Direct mode `git annex info` slows down a bit due to more stringent
checking, but not by a lot.
This allows eg, putting .git/annex/tmp on a ram disk, if the disk IO
of temp object files is too annoying (and if you don't want to keep
partially transferred objects across reboots).
.git/annex/misctmp must be on the same filesystem as the git work tree,
since files are moved to there in a way that will not work cross-device,
as well as symlinked into there.
I first wanted to put the tmp objects in .git/annex/objects/tmp, but
that would pose transition problems on upgrade when partially transferred
objects existed.
git annex info does not currently show the size of .git/annex/misctemp,
since it should stay small. It would also be ok to make something clean it
out, periodically.
Removed instance, got it all to build using fromRef. (With a few things
that really need to show something using a ref for debugging stubbed out.)
Then added back Read instance, and made Logs.View use it for serialization.
This changes the view log format.
This will be used in expiring old unused objects. The timestamp is when it
was first noticed it was unused.
Backwards compatability: It supports reading old format unused log files.
The old version of git-annex will ignore lines in log files written by the
new version, so the worst interop problem would be git annex dropunused not
knowing some numbers that git-annex unused reported.
I've been disliking how the command seek actions were written for some
time, with their inversion of control and ugly workarounds.
The last straw to fix it was sync --content, which didn't fit the
Annex [CommandStart] interface well at all. I have not yet made it take
advantage of the changed interface though.
The crucial change, and probably why I didn't do it this way from the
beginning, is to make each CommandStart action be run with exceptions
caught, and if it fails, increment a failure counter in annex state.
So I finally remove the very first code I wrote for git-annex, which
was before I had exception handling in the Annex monad, and so ran outside
that monad, passing state explicitly as it ran each CommandStart action.
This was a real slog from 1 to 5 am.
Test suite passes.
Memory usage is lower than before, sometimes by a couple of megabytes, and
remains constant, even when running in a large repo, and even when
repeatedly failing and incrementing the error counter. So no accidental
laziness space leaks.
Wall clock speed is identical, even in large repos.
This commit was sponsored by an anonymous bitcoiner.
I forgot I had <$$> hidden away in Utility.Applicative.
It allows doing the same kind of currying as does >=*>
and I found using it made the code more readable for me.
(*>=> was not used)
The reversion was that, if a file was git rm'd, but still in branches, it
would not be seen as used. Looking at both the added and the removed (or
changed) files from the diff-index is a cheap way to fix that.
Instead of populating the second-level Bloom filter with every key
referenced in every Git reference, consider only those which differ
from what's referenced in the index.
Incidentaly, unlike with its old behavior, staged
modifications/deletion/... will now be detected by 'unused'.
Credits to joeyh for the algorithm. :-)
Clean up from 9769235d6b.
In some cases, looking up a remote by name even though it has no UUID is
desirable. This includes git annex sync, which can operate on remotes
without an annex, and XMPP pairing, which runs addRemote (with calls
byName) before the UUID of the XMPP remote has been configured in git.
Now there's a Config type, that's extracted from the git config at startup.
Note that laziness means that individual config values are only looked up
and parsed on demand, and so we get implicit memoization for all of them.
So this is not only prettier and more type safe, it optimises several
places that didn't have explicit memoization before. As well as getting rid
of the ugly explicit memoization code.
Not yet done for annex.<remote>.* configuration settings.
Nearly everything that's reading from git is operating on a small
amount of output and has been switched to use that. Only pipeNullSplit
stuff continues using the lazy version that yields zombies.
Don't expose these as branches in refs/heads/. Instead hide them away in
refs/synced/ where only show-ref will find them.
Make unused only look at branches and tags, not these other things,
so it won't care if some stale sync ref used to use a file.
This means they don't need to be deleted, which could have
led to an incoming sync being missed.
This commit includes a paydown on technical debt incurred two years ago,
when I didn't know that it was bad to make custom Read and Show instances
for types. As the routes need Read and Show for Transfer, which includes a
Key, and deriving my own Read instance of key was not practical,
I had to finally clean that up.
So the compact Key read and show functions are now file2key and key2file,
and Read and Show are now derived instances.
Changed all code that used the old instances, compiler checked.
(There were a few places, particularly in Command.Unused, and the test
suite where the Show instance continue to be used for legitimate
comparisons; ie show key_x == show key_y (though really in a bloom filter))
Was decoding the git-cat-file of the symlink target as utf8, but that can't
do, unix filenames are from the 70's and need this shiny disco
fileSystemEncoding.
Baked into the code was an assumption that a repository's git directory
could be determined by adding ".git" to its work tree (or nothing for bare
repos). That fails when core.worktree, or GIT_DIR and GIT_WORK_TREE are
used to separate the two.
This was attacked at the type level, by storing the gitdir and worktree
separately, so Nothing for the worktree means a bare repo.
A complication arose because we don't learn where a repository is bare
until its configuration is read. So another Location type handles
repositories that have not had their config read yet. I am not entirely
happy with this being a Location type, rather than representing them
entirely separate from the Git type. The new code is not worse than the
old, but better types could enforce more safety.
Added support for core.worktree. Overriding it with -c isn't supported
because it's not really clear what to do if a git repo's config is read, is
not bare, and is then overridden to bare. What is the right git directory
in this case? I will worry about this if/when someone has a use case for
overriding core.worktree with -c. (See Git.Config.updateLocation)
Also removed and renamed some functions like gitDir and workTree that
misused git's terminology.
One minor regression is known: git annex add in a bare repository does not
print a nice error message, but runs git ls-files in a way that fails
earlier with a less nice error message. This is because before --work-tree
was always passed to git commands, even in a bare repo, while now it's not.
annex.ssh-options, annex.rsync-options, annex.bup-split-options.
And adjust types to avoid the bugs that broke several config settings
recently. Now "annex." prefixing is enforced at the type level.
Add tuning, docs, etc.
Not sure if status is the right place to remote size.. perhaps unused
should report the size and also warn if it sees more keys than the bloom
filter allows?
Stale and bad files are rare, so it's more efficient to use inAnnex to see
if they can be deleted, rather than keeping the list of all present keys
around for them.
Before, it leaked space due to caching lists of keys. Now all necessary
data about keys is calculated as they stream in.
The "nearly constant" is due to getKeysPresent, which builds up a lot
of [] thunks as it traverses .git/annex/objects/. Will deal with it later.
Much of the memory bloat turned out to be due to getKeysReferenced
containing a mapM, which is strict and buffered the whole list
rather than streaming it.
The other half of the bloat was due to building a temporary Set
in order to call S.difference. While that is more cpu efficient,
I switched to successive S.delete, since with it, I can run a whole
git annex unused in less than 8 mb of memory.
The whole Set of keys with content available is still stored in memory,
so running unused in a repo with a whole lot of file content will still
use more memory. In a repo containing 6000 files, it needed 40 mb.
Note that the status command still uses the bloatful getKeysReferenced.
