I anticipate lots of external special remote programs will neglect
implementing this. Still, it's the right thing to do to assume that some
of them may write files out of order. Probably most external special
remotes will not be used with a proxy. When someone is using one with a
proxy, they can always get it fixed to send ORDERED.
The problem was that when the proxy requests a key be retrieved to its
own temp file, fileRetriever was retriving it to the key's temp
location, and then moving it at the end, which broke streaming.
So, plumb through the path where the key is being retrieved to.
Currently works for special remotes that don't use fileRetriever. Ones that
do will download to another filename and rename it into place, defeating
the streaming.
This actually benchmarks slightly slower when getting a large file from
a fast proxied special remote. However, when the proxied special remote
is slow, it will be a big win.
This didn't work. In case I want to revisit, here's what I tried.
diff --git a/Annex/Proxy.hs b/Annex/Proxy.hs
index 48222872c1..e4e526d3dd 100644
--- a/Annex/Proxy.hs
+++ b/Annex/Proxy.hs
@@ -26,16 +26,21 @@ import Logs.UUID
import Logs.Location
import Utility.Tmp.Dir
import Utility.Metered
+import Utility.ThreadScheduler
+import Utility.OpenFd
import Git.Types
import qualified Database.Export as Export
import Control.Concurrent.STM
import Control.Concurrent.Async
+import Control.Concurrent.MVar
import qualified Data.ByteString as B
+import qualified Data.ByteString as BS
import qualified Data.ByteString.Lazy as L
import qualified System.FilePath.ByteString as P
import qualified Data.Map as M
import qualified Data.Set as S
+import System.IO.Unsafe
proxyRemoteSide :: ProtocolVersion -> Bypass -> Remote -> Annex RemoteSide
proxyRemoteSide clientmaxversion bypass r
@@ -240,21 +245,99 @@ proxySpecialRemote protoversion r ihdl ohdl owaitv oclosedv mexportdb = go
writeVerifyChunk iv h b
storetofile iv h (n - fromIntegral (B.length b)) bs
- proxyget offset af k = withproxytmpfile k $ \tmpfile -> do
+ proxyget offset af k = withproxytmpfile k $ \tmpfile ->
+ let retrieve = tryNonAsync $ Remote.retrieveKeyFile r k af
+ (fromRawFilePath tmpfile) nullMeterUpdate vc
+ in case fromKey keySize k of
+ Just size | size > 0 -> do
+ cancelv <- liftIO newEmptyMVar
+ donev <- liftIO newEmptyMVar
+ streamer <- liftIO $ async $
+ streamdata offset tmpfile size cancelv donev
+ retrieve >>= \case
+ Right _ -> liftIO $ do
+ putMVar donev ()
+ wait streamer
+ Left err -> liftIO $ do
+ putMVar cancelv ()
+ wait streamer
+ propagateerror err
+ _ -> retrieve >>= \case
+ Right _ -> liftIO $ senddata offset tmpfile
+ Left err -> liftIO $ propagateerror err
+ where
-- Don't verify the content from the remote,
-- because the client will do its own verification.
- let vc = Remote.NoVerify
- tryNonAsync (Remote.retrieveKeyFile r k af (fromRawFilePath tmpfile) nullMeterUpdate vc) >>= \case
- Right _ -> liftIO $ senddata offset tmpfile
- Left err -> liftIO $ propagateerror err
+ vc = Remote.NoVerify
+ streamdata (Offset offset) f size cancelv donev = do
+ sendlen offset size
+ waitforfile
+ x <- tryNonAsync $ do
+ fd <- openFdWithMode f ReadOnly Nothing defaultFileFlags
+ h <- fdToHandle fd
+ hSeek h AbsoluteSeek offset
+ senddata' h (getcontents size)
+ case x of
+ Left err -> do
+ throwM err
+ Right res -> return res
+ where
+ -- The file doesn't exist at the start.
+ -- Wait for some data to be written to it as well,
+ -- in case an empty file is first created and then
+ -- overwritten. When there is an offset, wait for
+ -- the file to get that large. Note that this is not used
+ -- when the size is 0.
+ waitforfile = tryNonAsync (fromIntegral <$> getFileSize f) >>= \case
+ Right sz | sz > 0 && sz >= offset -> return ()
+ _ -> ifM (isEmptyMVar cancelv)
+ ( do
+ threadDelaySeconds (Seconds 1)
+ waitforfile
+ , do
+ return ()
+ )
+
+ getcontents n h = unsafeInterleaveIO $ do
+ isdone <- isEmptyMVar donev <||> isEmptyMVar cancelv
+ c <- BS.hGet h defaultChunkSize
+ let n' = n - fromIntegral (BS.length c)
+ let c' = L.fromChunks [BS.take (fromIntegral n) c]
+ if BS.null c
+ then if isdone
+ then return mempty
+ else do
+ -- Wait for more data to be
+ -- written to the file.
+ threadDelaySeconds (Seconds 1)
+ getcontents n h
+ else if n' > 0
+ then do
+ -- unsafeInterleaveIO causes
+ -- this to be deferred until
+ -- data is read from the lazy
+ -- ByteString.
+ cs <- getcontents n' h
+ return $ L.append c' cs
+ else return c'
+
senddata (Offset offset) f = do
size <- fromIntegral <$> getFileSize f
- let n = max 0 (size - offset)
- sendmessage $ DATA (Len n)
+ sendlen offset size
withBinaryFile (fromRawFilePath f) ReadMode $ \h -> do
hSeek h AbsoluteSeek offset
- sendbs =<< L.hGetContents h
+ senddata' h L.hGetContents
+
+ senddata' h getcontents = do
+ sendbs =<< getcontents h
-- Important to keep the handle open until
-- the client responds. The bytestring
-- could still be lazily streaming out to
@@ -272,6 +355,11 @@ proxySpecialRemote protoversion r ihdl ohdl owaitv oclosedv mexportdb = go
Just FAILURE -> return ()
Just _ -> giveup "protocol error"
Nothing -> return ()
+
+ sendlen offset size = do
+ let n = max 0 (size - offset)
+ sendmessage $ DATA (Len n)
+
{- Check if this repository can proxy for a specified remote uuid,
- and if so enable proxying for it. -}
Without actually simulating cluster implementation at all. Instead, only
the essential fact that cluster gateways know what changes they have
made to each node of a cluster. That is enough for sims like
sizebalanced_cluster.
Noticed that it was quite slow compared with things like action
sendwanted. Guessed that the slowdown is largely due to every step
doing a simulated git pull/push.
So, rather than always doing a pull/push, only do those when no actions
are found without doing a pull/push.
This does mean that step will sometimes experience a split brain
situation, but that seems like a good thing? Because step ought to
explore as many possible scenarios as it reasonably can.
This demonstrates concurrent behavior that looks right. And with a
random seed, the results are deterministic.
init foo
init bar
init backup
connect foo <-> bar
connect foo <-> backup
addmulti 10 testfiles 1mb 1gb foo backup
action foo gitpull backup
wanted foo nothing
wanted bar anything
wanted backup anything
action bar gitpull foo
action foo dropunwanted while action bar getwanted foo
When getting from a remote, have to check that the repo doing the
getting thinks the remote contains the key, but also that the remote
actually does. Before this bug fix, it would get from a repo that used
to have the key, but that had dropped it since the last git pull.
