When annex.genmetadata is set, metadata from the feed is added to files
that are imported from it.
Reused the same feedtitle and itemtitle, feedauthor, itemauthor, etc names
that are used in --template.
Also added title and author, which are the item title/author if available,
falling back to the feed title/author. These are more likely to be common
metadata fields.
(There is a small bit of dupication here, but once git gets
around to packing the object, it will compress it away.)
The itempubdate field is not included in the metadata as a string; instead
it is used to generate year and month fields, same as is done when adding
files with annex.genmetadata set.
This commit was sponsored by Amitai Schlair, who cooincidentially
is responsible for ikiwiki generating nice feed metadata!
http://marc.info/?l=git&m=140262402204212&w=2
This git bug manifested on FAT and Windows as the test suite failing in 3
places. All involved merge conflict resolution. It turned out that the
associated file mappings were getting messed up, and that happened because
this git bug lost track of what files were supposed to be symlinks.
This commit was sponsored by Eric Kidd.
Rather than calculating the TSDelta once, and caching it, this now
reads the inode sential file's InodeCache file once, and then each time a
new InodeCache is generated, looks at the sentinal file to get the current
delta.
This way, if the time zone changes while git-annex is running, it will
adapt.
This adds some inneffiency, but only on Windows, and only 1 stat per new
file added. The worst innefficiency is that `git annex status` and
`git annex sync` will now (on Windows) stat the inode sentinal file once per
file in the repo.
It would be more efficient to use getCurrentTimeZone, rather than needing
to stat the sentinal file. This should be easy to do, once the time
package gets my bugfix patch.
This commit was sponsored by Jürgen Lüters.
On Windows, changing the time zone causes the apparent mtime of files to
change. This confuses git-annex, which natually thinks this means the files
have actually been modified (since THAT'S WHAT A MTIME IS FOR, BILL <sheesh>).
Work around this stupidity, by using the inode sentinal file to detect if
the timezone has changed, and calculate a TSDelta, which will be applied
when generating InodeCaches.
This should add no overhead at all on unix. Indeed, I sped up a few
things slightly in the refactoring.
Seems to basically work! But it has a big known problem:
If the timezone changes while the assistant (or a long-running command)
runs, it won't notice, since it only checks the inode cache once, and
so will use the old delta for all new inode caches it generates for new
files it's added. Which will result in them seeming changed the next time
it runs.
This commit was sponsored by Vincent Demeester.
It was possible for a interrupted sync or merge in direct mode to
leave the work tree out of sync with the last recorded commit.
This would result in the next commit seeing files missing from the work
tree, and committing their removal.
Now, a direct mode merge happens not only in a throwaway work tree, but using
a temporary index file, and without any commits or index changes
being made until the real work tree has been updated. If the merge is
interrupted, the work tree may have some updated files, but worst case a
commit will redundantly commit changes that come from the merge.
This commit was sponsored by Tony Cantor.
There was a tricky bit here, when it does combine, the edit form is shown,
and so the info needs to be committed to the new repository, but then
pulled into the current one. And caches need to be invalidated for it
to be visible in the edit form.
Allow any encoding to be used, as with filenames (but utf8 is the sane
choice). Affects metadata and repository descriptions, and preferred
content expressions.
The question of what's the right encoding for the git-annex branch is a
vexing one. utf-8 would be a nice choice, but this leaves the possibility
of bad data getting into a git-annex branch somehow, and this resulting in
git-annex crashing with encoding errors, which is a failure mode I want to
avoid.
(Also, preferred content expressions can refer to filenames, and filenames
can have any encoding, so limiting to utf-8 would not be ideal.)
The union merge code already took care to not assume any encoding for a
file. Except it assumes that any \n is a literal newline, and not part of
some encoding of a character that happens to contain a newline. (At least
utf-8 avoids using newline for anything except liternal newlines.)
Adapted the git-annex branch code to use this same approach.
Note that there is a potential interop problem with Windows, since
FileSystemEncoding doesn't work there, and instead things are always
decoded as utf-8. If someone uses non-utf8 encoding for data on the
git-annex branch, this can lead to an encoding error on windows. However,
this commit doesn't actually make that any worse, because the union merge
code would similarly fail with an encoding error on windows in that
situation.
This commit was sponsored by Kyle Meyer.
To use, set GIT_ANNEX_SSHASKPASS to point to a fifo or regular file
(FIFO is better, avoids touching disk or multiple readers) that contains
the password. Then set SSH_ASKPASS=git-annex, and when ssh runs it, it will
tell ssh the password.
This is not yet used..
Only fsck and reinject and the test suite used the Backend, and they can
look it up as needed from the Key. This simplifies the code and also speeds
it up.
There is a small behavior change here. Before, all commands would warn when
acting on an annexed file with an unknown backend. Now, only fsck and
reinject show that warning.
For sync, saves 1 ssh connection per remote. For remotedaemon, the same
ssh connection that is already open to run git-annex-shell notifychanges
is reused to pull from the remote.
Only potential problem is that this also enables connection caching
when the assistant syncs with a ssh remote. Including the sync it does
when a network connection has just come up. In that case, cached ssh
connections are likely to be stale, and so using them would hang.
Until I'm sure such problems have been dealt with, this commit needs to
stay on the remotecontrol branch, and not be merged to master.
This commit was sponsored by Alexandre Dupas.
Motivation: Hook scripts for nautilus or other file managers
need to provide the user with feedback that a file is being downloaded.
This commit was sponsored by THM Schoemaker.
Note that this is a nearly entirely free feature. The data was already
stored in the metadata log in an easily accessible way, and already was
parsed to a time when parsing the log. The generation of the metadata
fields may even be done lazily, although probably not entirely (the map
has to be evaulated to when queried).
For example "standard or (include=otherdir/*)" or even "not standard"
Note that the implementation avoids any potential for loops (if a
standard preferred content expression itself mentioned standard).
This commit was sponsored by Jochen Bartl.
Old ssh did not check the hostname passed to -O stop, so I had used "any".
But now ssh does check it! I think this happened as part of the client-side
hostname canonicalization changes in 6.5p1, but have not verified that
introduced the problem.
The symptom was that it would try to dns lookup "any", which often caused a
bit of a delay at shutdown. And the old ssh connection kept running, so
it would do it over and over again.
Fixed by using localhost, which hopefully reliably resolves to some address
that ssh will accept.. Also nukeFile the socket after ssh has been asked to
shutdown, just in case.
unused: In direct mode, files that are deleted from the work tree are no longer incorrectly detected as unused.
Direct mode `git annex info` slows down a bit due to more stringent
checking, but not by a lot.
This is a new feature, it was not handled before, since it's a bit of an
edge case. However, it can be handled exactly the same as a file/dir
conflict, just leave the non-annexed item alone.
While implementing this, the core resolveMerge' function got a lot simpler
and clearer. Note especially that where before there was an asymetric call to
stagefromdirectmergedir, now graftin is called symmetrically in both cases.
And, in order to add that `graftin us`, the current branch needed to be
known (if there is no current branch, there cannot be a merge conflict).
This led to some cleanups of how autoMergeFrom behaved when there is no
current branch.
This commit was sponsored by Philippe Gauthier.
Added test cases for both ways this can happen, with a conflict involving a
file, or a directory.
Cleaned up resolveMerge to not touch the work tree in direct mode, which
turned out to be the only way to handle things.. And makes it much nicer.
Still need to run test suite on windows.
In the case of a conflicted merge where the remote adds a directory, and we
have a file (which is checked in), resolveMerge' will create the link,
and so the fix for 1192d98721 looked at that,
thought it was an unannexed file (it's not in the oldref), and preserved
it.
This is a hacky fix. It would be better for resolveMerge' to not update the
work tree, at least in direct mode, and only stage the changes, which
mergeDirectCleanUp could then move into tree. I want to make that change,
but this is not the time to do it.
