Added annex.adjustedbranchrefresh git config to update adjusted branches
set up by git-annex adjust --unlock-present/--hide-missing.
Note, in a few cases, I was not able to make the adjusted branch
be updated in calls to moveAnnex, because information about what
file corresponds to a key is not available. They are:
* If two files point to one file, then eg, `git annex get foo` will
update the branch to unlock foo, but will not unlock bar, because it
does not know about it. Might be fixable by making `git annex get
bar` do something besides skipping bar?
* git-annex-shell recvkey likewise (so sends over ssh from old versions
of git-annex)
* git-annex setkey
* git-annex transferkey if the user does not use --file
* git-annex multicast sends keys with no associated file info
Doing a single full refresh at the end, after any incremental refresh,
will deal with those edge cases.
--batch combined with -J now runs batch requests concurrently for many
commands. Before, the combination was accepted, but did not enable
concurrency. Since the output of batch requests can be in any order, --json
with the new "input" field is recommended to be used, to determine which
batch request each response corresponds to.
If --json is not used, batch mode still runs concurrently, using the usual
concurrent-output. That will not be very useful for most batch mode users,
probably, but who knows.
If a program was using --batch -J before, and was parsing non-json output,
this could break it. But, it was relying on git-annex not supporting
concurrency despite it being enabled, so it should have expected concurrent
output. So, I think that's ok.
annex.jobs does not enable concurrency in --batch mode, because that would
confuse programs that use --batch but don't expect concurrency.
One reason is, 5 is an arbitrary number so ought to be configurable.
The real reason though, is I wanted to make the man page explain when
forward retry can override annex.retry, and having a config made the
man page easier to write.
"http" was too generic and easy to confuse with web. The new name makes
clear it's used in addition to some other remote. And other protocols
can use the same naming scheme.
Only supported by some special remotes: directory
I need to check the rest and they're currently missing methods until I do.
git-annex sync --no-content does not yet use this to do imports
Added annex.skipunknown git config, that can be set to false to change the
behavior of commands like `git annex get foo*`, to not skip over files/dirs
that are not checked into git and are explicitly listed in the command
line.
Significant complexity was needed to handle git-annex add, which uses some
git ls-files calls, but needs to not use --error-unmatch because of course
the files are not known to git.
annex.skipunknown is planned to change to default to false in a
git-annex release in early 2022. There's a todo for that.
I doubt that warning has ever been right, but I'm sure it is not right
now.
For there to be a risk of git gc deleting objects that are in the annex
index, journal files would have to be staged into it, and deleted, but
the index not committed to the git-annex branch. And AFAICS, there is no
code path where that actually happens. I considered adding one recently,
but didn't.
The way it actually works is, as long as the user has annex.alwayscommit=false
the data lives in the journal, where it's safe from git gc. Then when
git-annex is run w/o that config, the journal is staged into the index,
which is immediately committed to the branch. There's no window where
git gc could delete the objects, because git gc only deletes objects
after some time (2 weeks by default).
Now, if git-annex gets suspended at just the wrong time, or interrupted,
then yes, it's possible. But doesn't matter whether that config was ever
set or not. And many uses of git-annex also recover from that situation
by committing to the git-annex branch.
Fix some cases where handling of keys with extensions varied depending on
the locale.
A filename with a unicode extension would before generate a key with an
extension in a unicode locale, but not in LANG=C, because the extension
was not all alphanumeric. Also the the length of the extension could be
counted differently depending on the locale.
In a non-unicode locale, git-annex migrate would see that the extension
was not all alphanumeric and want to "upgrade" it. Now that doesn't happen.
As far as backwards compatability, this does mean that unicode
extensions are counted by the number of bytes, not number of characters.
So, if someone is using unicode extensions, they may find git-annex
stops using them when adding files, because their extensions are too
long. Keys already in their repo with the "too long" extensions will
still work though, so this only prevents adding the same content with
the same extension generating the same key. Documented this by
documenting that annex.maxextensionlength is a number of bytes.
Also, if a filename has an extension that is not valid utf-8 and the
locale is utf-8, the extension will be allowed now, and an old
git-annex, in the same locale would not, and would also want to
"upgrade" that.
* Added sync --only-annex, which syncs the git-annex branch and annexed
content but leaves managing the other git branches up to you.
* Added annex.synconlyannex git config setting, which can also be set with
git-annex config to configure sync in all clones of the repo.
Use case is then the user has their own git workflow, and wants to use
git-annex without disrupting that, so they sync --only-annex to get the
git-annex stuff in sync in addition to their usual git workflow.
When annex.synconlyannex is set, --not-only-annex can be used to override
it.
It's not entirely clear what --only-annex --commit or --only-annex
--push should do, and I left that combination not documented because I
don't know if I might want to change the current behavior, which is that
such options do not override the --only-annex. My gut feeling is that
there is no good reasons to use such combinations; if you want to use
your own git workflow, you'll be doing your own committing and pulling
and pushing.
A subtle question is, how should import/export special remotes be handled?
Importing updates their remote tracking branch and merges it into master.
If --only-annex prevented that git branch stuff, then it would prevent
exporting to the special remote, in the case where it has changes that
were not imported yet, because there would be a unresolved conflict.
I decided that it's best to treat the fact that there's a remote tracking
branch for import/export as an implementation detail in this case. The more
important thing is that an import/export special remote is entirely annexed
content, and so it makes a lot of sense that --only-annex will still sync
with it.
The git add behavior changes could be avoided if it turns out to be
really annoying, but then it would need to behave the old way when
annex.dotfiles=false and the new way when annex.dotfiles=true. I'd
rather not have the config option result in such divergent behavior as
`git annex add .` skipping a dotfile (old) vs adding to annex (new).
Note that the assistant always adds dotfiles to the annex.
This is surprising, but not new behavior. Might be worth making it also
honor annex.dotfiles, but I wonder if perhaps some user somewhere uses
it and keeps large files in a directory that happens to begin with a
dot. Since dotfiles and dotdirs are a unix culture thing, and the
assistant users may not be part of that culture, it seems best to keep
its current behavior for now.
* annex.addunlocked can be set to an expression with the same format used by
annex.largefiles, in case you want to default to unlocking some files but
not others.
* annex.addunlocked can be configured by git-annex config.
Added a git-annex-matching-expression man page, broken out from
tips/largefiles.
A tricky consequence of this is that git-annex add --relaxed
honors annex.addunlocked, but an expression might want to know the size
or content of an url, which it's not going to download. I decided it was
better not to fail, and just dummy up some plausible data in that case.
Performance impact should be negligible. The global config is already
loaded for annex.largefiles. The expression only has to be parsed once,
and in the simple true/false case, it should not do any additional work
matching it.
annex.largefiles can be configured by git-annex config, to more easily set
a default that will also be used by clones, without needing to shoehorn the
expression into the gitattributes file. The git config and gitattributes
override that.
Whenever something is added to git-annex config, we have to consider what
happens if a user puts a purposfully bad value in there. Or, if a new
git-annex adds some new value that an old git-annex can't parse.
In this case, a global annex.largefiles that can't be parsed currently
makes an error be thrown. That might not be ideal, but the gitattribute
behaves the same, and is almost equally repo-global.
Performance notes:
git-annex add and addurl construct a matcher once
and uses it for every file, so the added time penalty for reading the global
config log is minor. If the gitattributes annex.largefiles were deprecated,
git-annex add would get around 2% faster (excluding hashing), because
looking that up for each file is not fast. So this new way of setting
it is progress toward speeding up add.
git-annex smudge does need to load the log every time. As well as checking
the git attribute. Not ideal. Setting annex.gitaddtoannex=false avoids
both overheads.
Code change should be trvial, but not yet implemented. This
significantly complicated the task of documenting how git-annex works.
I'm not sure how useful the annex.gitaddtoannex confguration is after
this change; seems that if a user has an annex.largefiles they will want
it applied consistently. But the last thing I want to hear is more
complaining from users about git add doing something they don't want it
to.
There's a pretty high risk users who got used to the git add behavior
and don't have annex.largefiles configured will miss the NEWS and
complain bitterly about their suddenly bloated repositories. Oh well.
Removed outdated comments about the old behavior to avoid confusion.
I don't know if I've found all the places that griping spread to.
Added annex.gitaddtoannex configuration. Setting it to false prevents
git add from usually adding files to the annex.
(Unless the file was annexed before, or a renamed annexed file is detected.)
Currently left at true; some users are encouraging it be set to false.
Can be set to false to prevent any automatic repository upgrades.
Also, removed direct mode specific upgrade code in Annex.Init, and made
needsUpgrade always include the name/path of the repo, so if
there's a problem it's clear what repo has the problem.
And, made needsUpgrade catch any exceptions that might occur during the
upgrade, so it can display a more useful error message than just the
exception.
* Automatically convert direct mode repositories to v7 with adjusted
unlocked branches and set annex.thin.
* init: When run on a crippled filesystem with --version=5,
will error out, since version 7 is needed for adjusted unlocked branch.
* direct: This command always errors out as direct mode is no longer
supported.
* indirect: This command has become a deprecated noop.
* proxy: This command is deprecated because it was only needed in direct
mode. (But it continues to work.)
Also removed mentions of direct mode throughough the documentation.
I have not removed all the direct mode code yet.
This is a special remote and a git remote at the same time; git can pull
and push to it and git-annex can use it as a special remote.
Remote.Git has to check if it's configured as a git-lfs special remote
and sets it up as one if so.
Object methods not implemented yet.
Renamed annex.security.allowed-http-addresses to
annex.security.allowed-ip-addresses because it is not really specific to
the http protocol, also limiting eg, git-annex's use of ftp and via
youtube-dl, several other protocols.
The old name for the config will still work.
If both old and new name are set, the new name will win.
Added the ability to run one job per CPU (core), by setting annex.jobs=cpus,
or using option --jobs=cpus or -Jcpus.
Built with future expansion in mind, including not defaulting matching on
Concurrency so more constructors can later be added, and using "cpu"
instead of "0".
No deprecation warning at run time, just one on the man page.
One thing findref remains able to do that find cannot is to run in a bare
repo. Find was made to refuse to run in a bare repo because it seemed
confusing for it to not list any files ever in that situation. It would be
better for find --branch to work in a bare repo but not without --branch
but I don't currently have a way to do that.
Probably a better solution would be to make git-annex in a bare repo
default to --branch master or something like that instead of --all.
This commit was sponsored by Denis Dzyubenko on Patreon.
