Fail if --from or --to is passed to commands that do not support them.

Command.hs

@@ -22,8 +22,8 @@ import Init
 
 {- A command runs in these stages.
  -
- - a. The check stage is run once and should error out if anything
+ - a. The check stage runs checks, that error out if
- -    prevents the command from running. -}
+ -    anything prevents the command from running. -}
 type CommandCheck = Annex ()
 {- b. The seek stage takes the parameters passed to the command,
  -    looks through the repo to find the ones that are relevant
@@ -58,14 +58,6 @@ next a = return $ Just a
 stop :: Annex (Maybe a)
 stop = return Nothing
 
-needsNothing :: CommandCheck
-needsNothing = return ()
-
-{- Most commands will check this, as they need to be run in an initialized
- - repo. -}
-needsRepo :: CommandCheck
-needsRepo = ensureInitialized
-
 {- Checks that the command can be run in the current environment. -}
 checkCommand :: Command -> Annex ()
 checkCommand Command { cmdcheck = check } = check
@@ -239,3 +231,23 @@ autoCopies key vs numcopiesattr a = do
 			(_, have) <- trustPartition UnTrusted =<< keyLocations key
 			if length have `vs` needed then a else stop
 		else a
+
+{- Checks -}
+defaultChecks :: CommandCheck
+defaultChecks = noFrom >> noTo >> needsRepo
+
+noChecks :: CommandCheck
+noChecks = return ()
+
+needsRepo :: CommandCheck
+needsRepo = ensureInitialized
+
+noFrom :: CommandCheck
+noFrom = do
+	v <- Annex.getState Annex.fromremote
+	unless (v == Nothing) $ error "cannot use --from with this command"
+
+noTo :: CommandCheck
+noTo = do
+	v <- Annex.getState Annex.toremote
+	unless (v == Nothing) $ error "cannot use --to with this command"

Command/Add.hs

@@ -19,7 +19,7 @@ import Utility.Touch
 import Backend
 
 command :: [Command]
-command = [Command "add" paramPaths needsRepo seek "add files to annex"]
+command = [Command "add" paramPaths defaultChecks seek "add files to annex"]
 
 {- Add acts on both files not checked into git yet, and unlocked files. -}
 seek :: [CommandSeek]

Command/AddUrl.hs

@@ -20,7 +20,7 @@ import Annex.Content
 import Logs.Web
 
 command :: [Command]
-command = [Command "addurl" (paramRepeating paramUrl) needsRepo seek
+command = [Command "addurl" (paramRepeating paramUrl) defaultChecks seek
 	"add urls to annex"]
 
 seek :: [CommandSeek]

Command/ConfigList.hs

@@ -12,7 +12,7 @@ import Command
 import Annex.UUID
 
 command :: [Command]
-command = [Command "configlist" paramNothing needsRepo seek
+command = [Command "configlist" paramNothing defaultChecks seek
 		"outputs relevant git configuration"]
 
 seek :: [CommandSeek]

Command/Describe.hs

@@ -13,7 +13,7 @@ import qualified Remote
 import Logs.UUID
 
 command :: [Command]
-command = [Command "describe" (paramPair paramRemote paramDesc) needsRepo seek
+command = [Command "describe" (paramPair paramRemote paramDesc) defaultChecks seek
 	"change description of a repository"]
 
 seek :: [CommandSeek]

Command/Drop.hs

@@ -17,7 +17,7 @@ import Annex.Content
 import Config
 
 command :: [Command]
-command = [Command "drop" paramPaths needsRepo seek
+command = [Command "drop" paramPaths defaultChecks seek
 	"indicate content of files not currently wanted"]
 
 seek :: [CommandSeek]

Command/DropKey.hs

@@ -14,7 +14,7 @@ import Logs.Location
 import Annex.Content
 
 command :: [Command]
-command = [Command "dropkey" (paramRepeating paramKey) needsRepo seek
+command = [Command "dropkey" (paramRepeating paramKey) defaultChecks seek
 	"drops annexed content for specified keys"] 
 
 seek :: [CommandSeek]

Command/DropUnused.hs

@@ -21,8 +21,8 @@ import Types.Key
 type UnusedMap = M.Map String Key
 
 command :: [Command]
-command = [Command "dropunused" (paramRepeating paramNumber) needsRepo seek
+command = [Command "dropunused" (paramRepeating paramNumber) (noTo >> needsRepo)
-	"drop unused file content"]
+	seek "drop unused file content"]
 
 seek :: [CommandSeek]
 seek = [withUnusedMaps]

Command/Find.hs

@@ -13,7 +13,7 @@ import Annex.Content
 import Limit
 
 command :: [Command]
-command = [Command "find" paramPaths needsRepo seek "lists available files"]
+command = [Command "find" paramPaths defaultChecks seek "lists available files"]
 
 seek :: [CommandSeek]
 seek = [withFilesInGit start]

Command/Fix.hs

@@ -13,7 +13,7 @@ import qualified Annex.Queue
 import Annex.Content
 
 command :: [Command]
-command = [Command "fix" paramPaths needsRepo seek
+command = [Command "fix" paramPaths defaultChecks seek
 	"fix up symlinks to point to annexed content"]
 
 seek :: [CommandSeek]

Command/FromKey.hs

@@ -14,7 +14,7 @@ import Annex.Content
 import Types.Key
 
 command :: [Command]
-command = [Command "fromkey" paramPath needsRepo seek
+command = [Command "fromkey" paramPath defaultChecks seek
 	"adds a file using a specific key"]
 
 seek :: [CommandSeek]

Command/Fsck.hs

@@ -21,7 +21,7 @@ import Utility.FileMode
 import Config
 
 command :: [Command]
-command = [Command "fsck" paramPaths needsRepo seek "check for problems"]
+command = [Command "fsck" paramPaths defaultChecks seek "check for problems"]
 
 seek :: [CommandSeek]
 seek = [withNumCopies start]

Command/Get.hs

@@ -15,7 +15,7 @@ import Annex.Content
 import qualified Command.Move
 
 command :: [Command]
-command = [Command "get" paramPaths needsRepo seek
+command = [Command "get" paramPaths (noTo >> needsRepo) seek
 		"make content of annexed files available"]
 
 seek :: [CommandSeek]

Command/InAnnex.hs

@@ -12,7 +12,7 @@ import Command
 import Annex.Content
 
 command :: [Command]
-command = [Command "inannex" (paramRepeating paramKey) needsRepo seek
+command = [Command "inannex" (paramRepeating paramKey) defaultChecks seek
 		"checks if keys are present in the annex"]
 
 seek :: [CommandSeek]

Command/Init.hs

@@ -14,7 +14,7 @@ import Logs.UUID
 import Init
 	
 command :: [Command]
-command = [Command "init" paramDesc needsNothing seek "initialize git-annex"]
+command = [Command "init" paramDesc noChecks seek "initialize git-annex"]
 
 seek :: [CommandSeek]
 seek = [withWords start]

Command/InitRemote.hs

@@ -19,7 +19,7 @@ import Annex.UUID
 command :: [Command]
 command = [Command "initremote"
 	(paramPair paramName $ 	paramOptional $ paramRepeating paramKeyValue)
-	needsRepo seek "sets up a special (non-git) remote"]
+	defaultChecks seek "sets up a special (non-git) remote"]
 
 seek :: [CommandSeek]
 seek = [withWords start]

Command/Lock.hs

@@ -13,7 +13,7 @@ import qualified Annex.Queue
 import Backend
 	
 command :: [Command]
-command = [Command "lock" paramPaths needsRepo seek "undo unlock command"]
+command = [Command "lock" paramPaths defaultChecks seek "undo unlock command"]
 
 seek :: [CommandSeek]
 seek = [withFilesUnlocked start, withFilesUnlockedToBeCommitted start]

Command/Map.hs

@@ -23,7 +23,7 @@ import qualified Utility.Dot as Dot
 data Link = Link Git.Repo Git.Repo
 
 command :: [Command]
-command = [Command "map" paramNothing needsNothing seek
+command = [Command "map" paramNothing noChecks seek
 	"generate map of repositories"]
 
 seek :: [CommandSeek]

Command/Merge.hs

@@ -12,7 +12,7 @@ import Command
 import qualified Annex.Branch
 
 command :: [Command]
-command = [Command "merge" paramNothing needsRepo seek
+command = [Command "merge" paramNothing defaultChecks seek
 		"auto-merge remote changes into git-annex branch"]
 
 seek :: [CommandSeek]

Command/Migrate.hs

@@ -17,7 +17,7 @@ import Backend
 import Logs.Web
 
 command :: [Command]
-command = [Command "migrate" paramPaths needsRepo seek
+command = [Command "migrate" paramPaths defaultChecks seek
 	"switch data to different backend"]
 
 seek :: [CommandSeek]

Command/PreCommit.hs

@@ -13,7 +13,7 @@ import qualified Command.Fix
 import Backend
 
 command :: [Command]
-command = [Command "pre-commit" paramPaths needsRepo seek
+command = [Command "pre-commit" paramPaths defaultChecks seek
 	"run by git pre-commit hook"]
 
 {- The pre-commit hook needs to fix symlinks to all files being committed.

Command/RecvKey.hs

@@ -14,7 +14,7 @@ import Annex.Content
 import Utility.RsyncFile
 
 command :: [Command]
-command = [Command "recvkey" paramKey needsRepo seek
+command = [Command "recvkey" paramKey defaultChecks seek
 	"runs rsync in server mode to receive content"]
 
 seek :: [CommandSeek]

Command/Semitrust.hs

@@ -13,7 +13,7 @@ import qualified Remote
 import Logs.Trust
 
 command :: [Command]
-command = [Command "semitrust" (paramRepeating paramRemote) needsRepo seek
+command = [Command "semitrust" (paramRepeating paramRemote) defaultChecks seek
 	"return repository to default trust level"]
 
 seek :: [CommandSeek]

Command/SendKey.hs

@@ -13,7 +13,7 @@ import Annex.Content
 import Utility.RsyncFile
 
 command :: [Command]
-command = [Command "sendkey" paramKey needsRepo seek
+command = [Command "sendkey" paramKey defaultChecks seek
 	"runs rsync in server mode to send content"]
 
 seek :: [CommandSeek]

Command/SetKey.hs

@@ -13,7 +13,7 @@ import Logs.Location
 import Annex.Content
 
 command :: [Command]
-command = [Command "setkey" paramPath needsRepo seek
+command = [Command "setkey" paramPath defaultChecks seek
 	"sets annexed content for a key using a temp file"]
 
 seek :: [CommandSeek]

Command/Status.hs

@@ -39,7 +39,7 @@ data StatInfo = StatInfo
 type StatState = StateT StatInfo Annex
 
 command :: [Command]
-command = [Command "status" paramNothing needsRepo seek
+command = [Command "status" paramNothing defaultChecks seek
 	"shows status information about the annex"]
 
 seek :: [CommandSeek]

Command/Trust.hs

@@ -13,7 +13,7 @@ import qualified Remote
 import Logs.Trust
 
 command :: [Command]
-command = [Command "trust" (paramRepeating paramRemote) needsRepo seek
+command = [Command "trust" (paramRepeating paramRemote) defaultChecks seek
 	"trust a repository"]
 
 seek :: [CommandSeek]

Command/Unannex.hs

@@ -19,7 +19,7 @@ import qualified Git
 import qualified Git.LsFiles as LsFiles
 
 command :: [Command]
-command = [Command "unannex" paramPaths needsRepo seek
+command = [Command "unannex" paramPaths defaultChecks seek
 	"undo accidential add command"]
 
 seek :: [CommandSeek]

Command/Uninit.hs

@@ -19,12 +19,11 @@ import qualified Annex.Branch
 import Annex.Content
 
 command :: [Command]
-command = [Command "uninit" paramPaths check seek 
+command = [Command "uninit" paramPaths (check >> defaultChecks) seek 
         "de-initialize git-annex and clean out repository"]
 
 check :: Annex ()
 check = do
-	needsRepo
 	b <- current_branch	
 	when (b == Annex.Branch.name) $ error $
 		"cannot uninit when the " ++ b ++ " branch is checked out"

Command/Unlock.hs

@@ -19,7 +19,7 @@ command =
 	, c "edit" "same as unlock"
 	]
 	where
-		c n = Command n paramPaths needsRepo seek
+		c n = Command n paramPaths defaultChecks seek
 
 seek :: [CommandSeek]
 seek = [withFilesInGit start]

Command/Untrust.hs

@@ -13,7 +13,7 @@ import qualified Remote
 import Logs.Trust
 
 command :: [Command]
-command = [Command "untrust" (paramRepeating paramRemote) needsRepo seek
+command = [Command "untrust" (paramRepeating paramRemote) defaultChecks seek
 	"do not trust a repository"]
 
 seek :: [CommandSeek]

Command/Unused.hs

@@ -28,7 +28,7 @@ import qualified Annex.Branch
 import Annex.CatFile
 
 command :: [Command]
-command = [Command "unused" paramNothing needsRepo seek
+command = [Command "unused" paramNothing (noTo >> needsRepo) seek
 	"look for unused file content"]
 
 seek :: [CommandSeek]

Command/Upgrade.hs

@@ -13,7 +13,7 @@ import Upgrade
 import Annex.Version
 
 command :: [Command]
-command = [Command "upgrade" paramNothing needsNothing seek
+command = [Command "upgrade" paramNothing noChecks seek
 	"upgrade repository layout"]
 
 seek :: [CommandSeek]

Command/Version.hs

@@ -13,7 +13,7 @@ import qualified Build.SysConfig as SysConfig
 import Annex.Version
 
 command :: [Command]
-command = [Command "version" paramNothing needsNothing seek "show version info"]
+command = [Command "version" paramNothing noChecks seek "show version info"]
 
 seek :: [CommandSeek]
 seek = [withNothing start]

Command/Whereis.hs

@@ -14,7 +14,7 @@ import Remote
 import Logs.Trust
 
 command :: [Command]
-command = [Command "whereis" paramPaths needsRepo seek
+command = [Command "whereis" paramPaths defaultChecks seek
 	"lists repositories that have file content"]
 
 seek :: [CommandSeek]

debian/changelog

@@ -4,6 +4,7 @@ git-annex (3.20111026) UNRELEASED; urgency=low
   * copy --to: Fixed leak when copying many files to a remote on the same
     host.
   * uninit: Add guard against being run with the git-annex branch checked out.
+  * Fail if --from or --to is passed to commands that do not support them.
 
  -- Joey Hess <joeyh@debian.org>  Thu, 27 Oct 2011 13:58:53 -0400