Improve startup time for commands that do not operate on remotes

And for tab completion, by not unnessessarily statting paths to remotes,
which used to cause eg, spin-up of removable drives.

Got rid of the remotes member of Git.Repo. This was a bit painful.

Remote.Git modifies the list of remotes as it reads their configs,
so still need a persistent list of remotes. So, put it in as
Annex.gitremotes. It's only populated by getGitRemotes, so commands
like examinekey that don't care about remotes won't do so.

This commit was sponsored by Jake Vosloo on Patreon.

Annex.hs

@@ -1,6 +1,6 @@
 {- git-annex monad
  -
- - Copyright 2010-2013 Joey Hess <id@joeyh.name>
+ - Copyright 2010-2018 Joey Hess <id@joeyh.name>
  -
  - Licensed under the GNU GPL version 3 or higher.
  -}
@@ -34,12 +34,14 @@ module Annex (
 	getRemoteGitConfig,
 	withCurrentState,
 	changeDirectory,
+	getGitRemotes,
 	incError,
 ) where
 
 import Common
 import qualified Git
 import qualified Git.Config
+import qualified Git.Construct
 import Annex.Fixup
 import Git.CatFile
 import Git.HashObject
@@ -98,6 +100,7 @@ data AnnexState = AnnexState
 	{ repo :: Git.Repo
 	, repoadjustment :: (Git.Repo -> IO Git.Repo)
 	, gitconfig :: GitConfig
+	, gitremotes :: Maybe [Git.Repo]
 	, backend :: Maybe (BackendA Annex)
 	, remotes :: [Types.Remote.RemoteA Annex]
 	, remoteannexstate :: M.Map UUID AnnexState
@@ -153,6 +156,7 @@ newState c r = do
 		{ repo = r
 		, repoadjustment = return
 		, gitconfig = c
+		, gitremotes = Nothing
 		, backend = Nothing
 		, remotes = []
 		, remoteannexstate = M.empty
@@ -357,3 +361,13 @@ incError = changeState $ \s ->
 	let ! c = errcounter s + 1 
 	    ! s' = s { errcounter = c }
 	in s'
+
+getGitRemotes :: Annex [Git.Repo]
+getGitRemotes = do
+	s <- getState id
+	case gitremotes s of
+		Just rs -> return rs
+		Nothing -> do
+			rs <- liftIO $ Git.Construct.fromRemotes (repo s)
+			changeState $ \s' -> s' { gitremotes = Just rs }
+			return rs

Annex/Branch.hs

@@ -60,7 +60,6 @@ import Logs.Transitions
 import Logs.File
 import Logs.Trust.Pure
 import Logs.Difference.Pure
-import Annex.ReplaceFile
 import qualified Annex.Queue
 import Annex.Branch.Transitions
 import qualified Annex

Annex/Content/Direct.hs

@@ -32,7 +32,6 @@ module Annex.Content.Direct (
 import Annex.Common
 import Annex.Perms
 import qualified Git
-import Utility.Tmp
 import Logs.Location
 import Logs.File
 import Utility.InodeCache

Annex/Fixup.hs

@@ -10,7 +10,6 @@ module Annex.Fixup where
 import Git.Types
 import Git.Config
 import Types.GitConfig
-import qualified Git.Construct as Construct
 import qualified Git.BuildVersion
 import Utility.Path
 import Utility.SafeCommand
@@ -30,7 +29,7 @@ fixupRepo r c = do
 	let r' = disableWildcardExpansion r
 	r'' <- fixupSubmodule r' c
 	if annexDirect c
-		then fixupDirect r''
+		then return (fixupDirect r'')
 		else return r''
 
 {- Disable git's built-in wildcard expansion, which is not wanted
@@ -44,19 +43,16 @@ disableWildcardExpansion r
 {- Direct mode repos have core.bare=true, but are not really bare.
  - Fix up the Repo to be a non-bare repo, and arrange for git commands
  - run by git-annex to be passed parameters that override this setting. -}
-fixupDirect :: Repo -> IO Repo
+fixupDirect :: Repo -> Repo
 fixupDirect r@(Repo { location = l@(Local { gitdir = d, worktree = Nothing }) }) = do
-	let r' = r
+	r
 		{ location = l { worktree = Just (parentDir d) }
 		, gitGlobalOpts = gitGlobalOpts r ++
 			[ Param "-c"
 			, Param $ coreBare ++ "=" ++ boolConfig False
 			]
 		}
-	-- Recalc now that the worktree is correct.
-	rs' <- Construct.fromRemotes r'
-	return $ r' { remotes = rs' }
-fixupDirect r = return r
+fixupDirect r = r
 
 {- Submodules have their gitdir containing ".git/modules/", and
  - have core.worktree set, and also have a .git file in the top

Assistant/MakeRemote.hs

@@ -16,6 +16,7 @@ import qualified Remote.Rsync as Rsync
 import qualified Remote.GCrypt as GCrypt
 import qualified Git
 import qualified Git.Command
+import qualified Annex
 import qualified Annex.SpecialRemote
 import Logs.UUID
 import Logs.Remote
@@ -122,26 +123,26 @@ makeGitRemote basename location = makeRemote basename location $ \name ->
  - Returns the name of the remote. -}
 makeRemote :: String -> String -> (RemoteName -> Annex ()) -> Annex RemoteName
 makeRemote basename location a = do
-	g <- gitRepo
-	if not (any samelocation $ Git.remotes g)
+	rs <- Annex.getGitRemotes
+	if not (any samelocation rs)
 		then do
-			let name = uniqueRemoteName basename 0 g
+			let name = uniqueRemoteName basename 0 rs
 			a name
 			return name
 		else return basename
   where
 	samelocation x = Git.repoLocation x == location
 
-{- Generate an unused name for a remote, adding a number if
- - necessary.
+{- Given a list of all remotes, generate an unused name for a new
+ - remote, adding a number if necessary.
  -
  - Ensures that the returned name is a legal git remote name. -}
-uniqueRemoteName :: String -> Int -> Git.Repo -> RemoteName
-uniqueRemoteName basename n r
+uniqueRemoteName :: String -> Int -> [Git.Repo] -> RemoteName
+uniqueRemoteName basename n rs
 	| null namecollision = name
-	| otherwise = uniqueRemoteName legalbasename (succ n) r
+	| otherwise = uniqueRemoteName legalbasename (succ n) rs
   where
-	namecollision = filter samename (Git.remotes r)
+	namecollision = filter samename rs
 	samename x = Git.remoteName x == Just name
 	name
 		| n == 0 = legalbasename

Assistant/WebApp/Configurators/Edit.hs

@@ -94,7 +94,7 @@ setRepoConfig uuid mremote oldc newc = do
 		void uuidMapLoad
 	when nameChanged $ do
 		liftAnnex $ do
-			name <- fromRepo $ uniqueRemoteName (legalName newc) 0
+			name <- uniqueRemoteName (legalName newc) 0 <$> Annex.getGitRemotes
 			{- git remote rename expects there to be a
 			 - remote.<name>.fetch, and exits nonzero if
 			 - there's not. Special remotes don't normally

Assistant/WebApp/Gpg.hs

@@ -69,7 +69,7 @@ withNewSecretKey use = do
  -}
 getGCryptRemoteName :: UUID -> String -> Annex RemoteName
 getGCryptRemoteName u repoloc = do
-	tmpremote <- uniqueRemoteName "tmpgcryptremote" 0 <$> gitRepo
+	tmpremote <- uniqueRemoteName "tmpgcryptremote" 0 <$> Annex.getGitRemotes
 	void $ inRepo $ Git.Command.runBool
 		[ Param "remote"
 		, Param "add"

CHANGELOG

@@ -13,6 +13,9 @@ git-annex (6.20171215) UNRELEASED; urgency=medium
   * git-annex.cabal: Add back custom-setup stanza, so cabal new-build works.
   * Fix several places where files in .git/annex/ were written with modes
     that did not take the core.sharedRepository config into account.
+  * Improve startup time for commands that do not operate on remotes,
+    and for tab completion, by not unnessessarily statting paths to
+    remotes, which used to cause eg, spin-up of removable drives.
 
  -- Joey Hess <id@joeyh.name>  Wed, 20 Dec 2017 12:11:46 -0400
 

CmdLine/GitAnnex/Options.hs

@@ -1,6 +1,6 @@
 {- git-annex command-line option parsing
  -
- - Copyright 2010-2017 Joey Hess <id@joeyh.name>
+ - Copyright 2010-2018 Joey Hess <id@joeyh.name>
  -
  - Licensed under the GNU GPL version 3 or higher.
  -}
@@ -10,10 +10,12 @@ module CmdLine.GitAnnex.Options where
 import Options.Applicative
 import Options.Applicative.Builder.Internal
 import Control.Concurrent
+import qualified Data.Map as M
 
 import Annex.Common
 import qualified Git.Config
 import qualified Git.Construct
+import Git.Remote
 import Git.Types
 import Types.Key
 import Types.TrustLevel
@@ -348,9 +350,10 @@ completeRemotes :: HasCompleter f => Mod f a
 completeRemotes = completer $ mkCompleter $ \input -> do
 	r <- maybe (pure Nothing) (Just <$$> Git.Config.read)
 		=<< Git.Construct.fromCwd
-	return $ filter (input `isPrefixOf`) 
-		(maybe [] (mapMaybe remoteName . remotes) r)
-		
+	return $ filter (input `isPrefixOf`) $
+		map remoteKeyToRemoteName $
+			filter isRemoteKey $
+				maybe [] (M.keys . config) r
 		
 completeBackends :: HasCompleter f => Mod f a
 completeBackends = completeWith $

Command/EnableRemote.hs

@@ -36,7 +36,7 @@ seek = withWords start
 
 start :: [String] -> CommandStart
 start [] = unknownNameError "Specify the remote to enable."
-start (name:rest) = go =<< filter matchingname <$> Annex.fromRepo Git.remotes
+start (name:rest) = go =<< filter matchingname <$> Annex.getGitRemotes
   where
 	matchingname r = Git.remoteName r == Just name
 	go [] = startSpecialRemote name (Logs.Remote.keyValToConfig rest)
@@ -104,7 +104,7 @@ unknownNameError prefix = do
 			else Remote.prettyPrintUUIDsDescs
 				"known special remotes"
 				descm (M.keys m)
-	disabledremotes <- filterM isdisabled =<< Annex.fromRepo Git.remotes
+	disabledremotes <- filterM isdisabled =<< Annex.getGitRemotes
 	let remotesmsg = unlines $ map ("\t" ++) $
 		mapMaybe Git.remoteName disabledremotes
 	giveup $ concat $ filter (not . null) [prefix ++ "\n", remotesmsg, specialmsg]

Command/Map.hs

@@ -27,6 +27,9 @@ import qualified Utility.Dot as Dot
 -- a link from the first repository to the second (its remote)
 data Link = Link Git.Repo Git.Repo
 
+-- a repo and its remotes
+type RepoRemotes = (Git.Repo, [Git.Repo])
+
 cmd :: Command
 cmd = dontCheck repoExists $
 	command "map" SectionQuery
@@ -76,11 +79,11 @@ runViewer file ((c, ps):rest) = ifM (liftIO $ inPath c)
  - the repositories first, followed by uuids that were not matched
  - to a repository.
  -}
-drawMap :: [Git.Repo] -> TrustMap -> M.Map UUID String -> String
+drawMap :: [RepoRemotes] -> TrustMap -> M.Map UUID String -> String
 drawMap rs trustmap umap = Dot.graph $ repos ++ others
   where
-	repos = map (node umap rs trustmap) rs
-	ruuids = map getUncachedUUID rs
+	repos = map (node umap (map fst rs) trustmap) rs
+	ruuids = map (getUncachedUUID . fst) rs
 	others = map uuidnode $ 
 		filter (\u -> M.lookup u trustmap /= Just DeadTrusted) $
 		filter (`notElem` ruuids) (M.keys umap)
@@ -113,13 +116,13 @@ nodeId r =
 		UUID u -> u
 
 {- A node representing a repo. -}
-node :: M.Map UUID String -> [Git.Repo] -> TrustMap -> Git.Repo -> String
-node umap fullinfo trustmap r = unlines $ n:edges
+node :: M.Map UUID String -> [Git.Repo] -> TrustMap -> RepoRemotes -> String
+node umap fullinfo trustmap (r, rs) = unlines $ n:edges
   where
 	n = Dot.subGraph (hostname r) (basehostname r) "lightblue" $
 		trustDecorate trustmap (getUncachedUUID r) $
 			Dot.graphNode (nodeId r) (repoName umap r)
-	edges = map (edge umap fullinfo r) (Git.remotes r)
+	edges = map (edge umap fullinfo r) rs
 
 {- An edge between two repos. The second repo is a remote of the first. -}
 edge :: M.Map UUID String -> [Git.Repo] -> Git.Repo -> Git.Repo -> String	
@@ -149,21 +152,21 @@ trustDecorate trustmap u s = case M.lookup u trustmap of
 	Nothing -> Dot.fillColor "white" s
 
 {- Recursively searches out remotes starting with the specified repo. -}
-spider :: Git.Repo -> Annex [Git.Repo]
+spider :: Git.Repo -> Annex [RepoRemotes]
 spider r = spider' [r] []
-spider' :: [Git.Repo] -> [Git.Repo] -> Annex [Git.Repo]
+spider' :: [Git.Repo] -> [RepoRemotes] -> Annex [RepoRemotes]
 spider' [] known = return known
 spider' (r:rs) known
-	| any (same r) known = spider' rs known
+	| any (same r) (map fst known) = spider' rs known
 	| otherwise = do
 		r' <- scan r
 
 		-- The remotes will be relative to r', and need to be
 		-- made absolute for later use.
-		remotes <- mapM (absRepo r') (Git.remotes r')
-		let r'' = r' { Git.remotes = remotes }
-
-		spider' (rs ++ remotes) (r'':known)
+		remotes <- mapM (absRepo r')
+			=<< (liftIO $ Git.Construct.fromRemotes r')
+	
+		spider' (rs ++ remotes) ((r', remotes):known)
 
 {- Converts repos to a common absolute form. -}
 absRepo :: Git.Repo -> Git.Repo -> Annex Git.Repo
@@ -260,11 +263,11 @@ tryScan r
 
 {- Spidering can find multiple paths to the same repo, so this is used
  - to combine (really remove) duplicate repos with the same UUID. -}
-combineSame :: [Git.Repo] -> [Git.Repo]
+combineSame :: [RepoRemotes] -> [RepoRemotes]
 combineSame = map snd . nubBy sameuuid . map pair
   where
 	sameuuid (u1, _) (u2, _) = u1 == u2 && u1 /= NoUUID
-	pair r = (getUncachedUUID r, r)
+	pair (r, rs) = (getUncachedUUID r, (r, rs))
 
 safely :: IO Git.Repo -> IO (Maybe Git.Repo)
 safely a = do

Command/P2P.hs

@@ -76,7 +76,7 @@ seek (Pair, Nothing) = commandAction $ do
 unusedPeerRemoteName :: Annex RemoteName
 unusedPeerRemoteName = go (1 :: Integer) =<< usednames
   where
-	usednames = mapMaybe remoteName . remotes <$> Annex.gitRepo
+	usednames = mapMaybe remoteName <$> Annex.getGitRemotes
 	go n names = do
 		let name = "peer" ++ show n
 		if name `elem` names

Git/Config.hs

@@ -13,8 +13,8 @@ import Data.Char
 import Common
 import Git
 import Git.Types
-import qualified Git.Construct
 import qualified Git.Command
+import qualified Git.Construct
 import Utility.UserInfo
 
 {- Returns a single git config setting, or a default value if not set. -}
@@ -89,12 +89,10 @@ hRead repo h = do
 store :: String -> Repo -> IO Repo
 store s repo = do
 	let c = parse s
-	repo' <- updateLocation $ repo
+	updateLocation $ repo
 		{ config = (M.map Prelude.head c) `M.union` config repo
 		, fullconfig = M.unionWith (++) c (fullconfig repo)
 		}
-	rs <- Git.Construct.fromRemotes repo'
-	return $ repo' { remotes = rs }
 
 {- Updates the location of a repo, based on its configuration.
  -

Git/Construct.hs

@@ -127,8 +127,7 @@ fromRemotes repo = mapM construct remotepairs
   where
 	filterconfig f = filter f $ M.toList $ config repo
 	filterkeys f = filterconfig (\(k,_) -> f k)
-	remotepairs = filterkeys isremote
-	isremote k = "remote." `isPrefixOf` k && ".url" `isSuffixOf` k
+	remotepairs = filterkeys isRemoteKey
 	construct (k,v) = remoteNamedFromKey k $ fromRemoteLocation v repo
 
 {- Sets the name of a remote when constructing the Repo to represent it. -}
@@ -140,10 +139,7 @@ remoteNamed n constructor = do
 {- Sets the name of a remote based on the git config key, such as
  - "remote.foo.url". -}
 remoteNamedFromKey :: String -> IO Repo -> IO Repo
-remoteNamedFromKey k = remoteNamed basename
-  where
-	basename = intercalate "." $ 
-		reverse $ drop 1 $ reverse $ drop 1 $ splitc '.' k
+remoteNamedFromKey = remoteNamed . remoteKeyToRemoteName
 
 {- Constructs a new Repo for one of a Repo's remotes using a given
  - location (ie, an url). -}
@@ -233,7 +229,6 @@ newFrom l = Repo
 	{ location = l
 	, config = M.empty
 	, fullconfig = M.empty
-	, remotes = []
 	, remoteName = Nothing
 	, gitEnv = Nothing
 	, gitEnvOverridesGitDir = False

Git/Remote.hs

@@ -20,6 +20,15 @@ import Network.URI
 import Git.FilePath
 #endif
 
+{- Is a git config key one that specifies the location of a remote? -}
+isRemoteKey :: String -> Bool
+isRemoteKey k = "remote." `isPrefixOf` k && ".url" `isSuffixOf` k
+
+{- Get a remote's name from the config key that specifies its location. -}
+remoteKeyToRemoteName :: String -> RemoteName
+remoteKeyToRemoteName k = intercalate "." $
+	reverse $ drop 1 $ reverse $ drop 1 $ splitc '.' k
+
 {- Construct a legal git remote name out of an arbitrary input string.
  -
  - There seems to be no formal definition of this in the git source,

Git/Repair.hs

@@ -11,7 +11,6 @@ module Git.Repair (
 	removeBadBranches,
 	successfulRepair,
 	cleanCorruptObjects,
-	retrieveMissingObjects,
 	resetLocalBranches,
 	checkIndex,
 	checkIndexFast,
@@ -102,10 +101,11 @@ retrieveMissingObjects missing referencerepo r
 		unlessM (boolSystem "git" [Param "init", File tmpdir]) $
 			error $ "failed to create temp repository in " ++ tmpdir
 		tmpr <- Config.read =<< Construct.fromAbsPath tmpdir
-		stillmissing <- pullremotes tmpr (remotes r) fetchrefstags missing
+		rs <- Construct.fromRemotes r
+		stillmissing <- pullremotes tmpr rs fetchrefstags missing
 		if S.null (knownMissing stillmissing)
 			then return stillmissing
-			else pullremotes tmpr (remotes r) fetchallrefs stillmissing
+			else pullremotes tmpr rs fetchallrefs stillmissing
   where
 	pullremotes tmpr [] fetchrefs stillmissing = case referencerepo of
 		Nothing -> return stillmissing

Git/Types.hs

@@ -34,8 +34,8 @@ data Repo = Repo
 	, config :: M.Map String String
 	-- a given git config key can actually have multiple values
 	, fullconfig :: M.Map String [String]
-	, remotes :: [Repo]
-	-- remoteName holds the name used for this repo in remotes
+	-- remoteName holds the name used for this repo in some other
+	-- repo's list of remotes, when this repo is such a remote
 	, remoteName :: Maybe RemoteName
 	-- alternate environment to use when running git commands
 	, gitEnv :: Maybe [(String, String)]

Remote/GCrypt.hs

@@ -182,7 +182,7 @@ gCryptSetup _ mu _ c gc = go $ M.lookup "gitrepo" c
 		(c', _encsetup) <- encryptionSetup c gc
 
 		let url = Git.GCrypt.urlPrefix ++ gitrepo
-		rs <- fromRepo Git.remotes
+		rs <- Annex.getGitRemotes
 		case filter (\r -> Git.remoteName r == Just remotename) rs of
 			[] -> inRepo $ Git.Command.run 
 				[ Param "remote", Param "add"

Remote/Git.hs

@@ -78,7 +78,7 @@ remote = RemoteType
 list :: Bool -> Annex [Git.Repo]
 list autoinit = do
 	c <- fromRepo Git.config
-	rs <- mapM (tweakurl c) =<< fromRepo Git.remotes
+	rs <- mapM (tweakurl c) =<< Annex.getGitRemotes
 	mapM (configRead autoinit) rs
   where
 	annexurl n = "remote." ++ n ++ ".annexurl"
@@ -104,8 +104,8 @@ gitSetup :: SetupStage -> Maybe UUID -> Maybe CredPair -> RemoteConfig -> Remote
 gitSetup Init mu _ c _ = do
 	let location = fromMaybe (giveup "Specify location=url") $
 		Url.parseURIRelaxed =<< M.lookup "location" c
-	g <- Annex.gitRepo
-	u <- case filter (\r -> Git.location r == Git.Url location) (Git.remotes g) of
+	rs <- Annex.getGitRemotes
+	u <- case filter (\r -> Git.location r == Git.Url location) rs of
 		[r] -> getRepoUUID r
 		[] -> giveup "could not find existing git remote with specified location"
 		_ -> giveup "found multiple git remotes with specified location"
@@ -263,10 +263,9 @@ tryGitConfigRead autoinit r
 				return r
 
 	store = observe $ \r' -> do
-		g <- gitRepo
-		let l = Git.remotes g
-		let g' = g { Git.remotes = exchange l r' }
-		Annex.changeState $ \s -> s { Annex.repo = g' }
+		l <- Annex.getGitRemotes
+		let rs = exchange l r'
+		Annex.changeState $ \s -> s { Annex.gitremotes = Just rs }
 
 	exchange [] _ = []
 	exchange (old:ls) new

RemoteDaemon/Core.hs

@@ -17,6 +17,7 @@ import RemoteDaemon.Transport
 import qualified Git
 import qualified Git.Types as Git
 import qualified Git.CurrentRepo
+import qualified Git.Construct
 import Utility.SimpleProtocol
 import Utility.ThreadScheduler
 import Config
@@ -137,8 +138,9 @@ runController ichan ochan = do
 -- Generates a map with a transport for each supported remote in the git repo,
 -- except those that have annex.sync = false
 genRemoteMap :: TransportHandle -> TChan Emitted -> IO RemoteMap
-genRemoteMap h@(TransportHandle (LocalRepo g) _) ochan = 
-	M.fromList . catMaybes <$> mapM gen (Git.remotes g)
+genRemoteMap h@(TransportHandle (LocalRepo g) _) ochan = do
+	rs <- Git.Construct.fromRemotes g
+	M.fromList . catMaybes <$> mapM gen rs
   where
 	gen r = do
 		gc <- atomically $ extractRemoteGitConfig g (Git.repoDescribe r)

doc/bugs/Missing_automounts_block_every_command/comment_1_3e9ac639a2f15cc3b0d277b5fbf17db7._comment

@@ -0,0 +1,18 @@
+[[!comment format=mdwn
+ username="joey"
+ subject="""comment 1"""
+ date="2018-01-09T17:02:41Z"
+ content="""
+There are a couple of parts to this, so let's get this one out of the way
+first: Tab completion etc should not be looking at remotes.
+
+It seems that even `git annex --help` does for some reason; so does
+stuff like `git annex examinekey`. So it's happening in a core code-path.
+
+Ah, ok.. Git.Config.read uses Git.Construct.fromRemotes,
+which uses Git.Construct.fromAbsPath, which stats
+the remote directory to handle ".git" canonicalization.
+
+Fixed this part of it; now only when the remoteList is built does it
+stat remotes.
+"""]]

doc/bugs/Missing_automounts_block_every_command/comment_2_94e118e60c74e6ac44aa6a396d41a939._comment

@@ -0,0 +1,39 @@
+[[!comment format=mdwn
+ username="joey"
+ subject="""comment 2"""
+ date="2018-01-09T19:56:42Z"
+ content="""
+With the above dealt with, the remaining problem is with commands
+like `git annex whereis` or `git annex info`, which don't really
+any on any remote, but still need to examine the remotes as part of
+building the remoteList.
+
+git-annex supports remotes that point to a mount point that might have
+different drives mounted at it at different times. So, it needs to
+check the git config of the remote each time, to see what repository is
+currently there.
+
+Even commands like "whereis" and "info" have output that depends on
+what repository a remote is currently pointing to. In some cases,
+"whereis" might not output anything that depends on a given remote,
+so in theory it could avoid looking at the config of that remote. 
+And a command like "git annex copy --to origin" doesn't really
+need to look at the configs of any other remotes.
+
+But to avoid unncessarily checking the git configs of remotes that a
+command does not use would need each use of the current remoteList
+to be replaced with something else that does the minimal needed work,
+instead of building the whole remoteList. I think this would be quite
+complicated.
+
+And, I don't know that it would address the bug report adequequately, even
+if it were done. Running `git annex info` would
+still block waiting for the automount; `git annex whereis` would
+only *sometimes* block, depending on where content is.
+
+So instead of that approach, perhaps a config setting will do?
+A per-remote config that tells git-annex that only one repository
+should ever be mounted at its location. That would make git-annex
+avoid checking the git config of that remote each time, except
+when it's actually storing/dropping content on it.
+"""]]