2014-01-29 17:44:53 +00:00
|
|
|
{- git-annex command-line actions
|
fix inversion of control in CommandSeek (no behavior changes)
I've been disliking how the command seek actions were written for some
time, with their inversion of control and ugly workarounds.
The last straw to fix it was sync --content, which didn't fit the
Annex [CommandStart] interface well at all. I have not yet made it take
advantage of the changed interface though.
The crucial change, and probably why I didn't do it this way from the
beginning, is to make each CommandStart action be run with exceptions
caught, and if it fails, increment a failure counter in annex state.
So I finally remove the very first code I wrote for git-annex, which
was before I had exception handling in the Annex monad, and so ran outside
that monad, passing state explicitly as it ran each CommandStart action.
This was a real slog from 1 to 5 am.
Test suite passes.
Memory usage is lower than before, sometimes by a couple of megabytes, and
remains constant, even when running in a large repo, and even when
repeatedly failing and incrementing the error counter. So no accidental
laziness space leaks.
Wall clock speed is identical, even in large repos.
This commit was sponsored by an anonymous bitcoiner.
2014-01-20 08:11:42 +00:00
|
|
|
-
|
|
|
|
|
- Copyright 2010-2014 Joey Hess <joey@kitenet.net>
|
|
|
|
|
-
|
|
|
|
|
- Licensed under the GNU GPL version 3 or higher.
|
|
|
|
|
-}
|
|
|
|
|
|
|
|
|
|
{-# LANGUAGE BangPatterns #-}
|
|
|
|
|
|
2014-01-29 17:44:53 +00:00
|
|
|
module CmdLine.Action where
|
fix inversion of control in CommandSeek (no behavior changes)
I've been disliking how the command seek actions were written for some
time, with their inversion of control and ugly workarounds.
The last straw to fix it was sync --content, which didn't fit the
Annex [CommandStart] interface well at all. I have not yet made it take
advantage of the changed interface though.
The crucial change, and probably why I didn't do it this way from the
beginning, is to make each CommandStart action be run with exceptions
caught, and if it fails, increment a failure counter in annex state.
So I finally remove the very first code I wrote for git-annex, which
was before I had exception handling in the Annex monad, and so ran outside
that monad, passing state explicitly as it ran each CommandStart action.
This was a real slog from 1 to 5 am.
Test suite passes.
Memory usage is lower than before, sometimes by a couple of megabytes, and
remains constant, even when running in a large repo, and even when
repeatedly failing and incrementing the error counter. So no accidental
laziness space leaks.
Wall clock speed is identical, even in large repos.
This commit was sponsored by an anonymous bitcoiner.
2014-01-20 08:11:42 +00:00
|
|
|
|
|
|
|
|
import Common.Annex
|
|
|
|
|
import qualified Annex
|
|
|
|
|
import Types.Command
|
|
|
|
|
import qualified Annex.Queue
|
|
|
|
|
|
2014-01-20 17:31:03 +00:00
|
|
|
type CommandActionRunner = CommandStart -> CommandCleanup
|
|
|
|
|
|
fix inversion of control in CommandSeek (no behavior changes)
I've been disliking how the command seek actions were written for some
time, with their inversion of control and ugly workarounds.
The last straw to fix it was sync --content, which didn't fit the
Annex [CommandStart] interface well at all. I have not yet made it take
advantage of the changed interface though.
The crucial change, and probably why I didn't do it this way from the
beginning, is to make each CommandStart action be run with exceptions
caught, and if it fails, increment a failure counter in annex state.
So I finally remove the very first code I wrote for git-annex, which
was before I had exception handling in the Annex monad, and so ran outside
that monad, passing state explicitly as it ran each CommandStart action.
This was a real slog from 1 to 5 am.
Test suite passes.
Memory usage is lower than before, sometimes by a couple of megabytes, and
remains constant, even when running in a large repo, and even when
repeatedly failing and incrementing the error counter. So no accidental
laziness space leaks.
Wall clock speed is identical, even in large repos.
This commit was sponsored by an anonymous bitcoiner.
2014-01-20 08:11:42 +00:00
|
|
|
{- Runs a command, starting with the check stage, and then
|
|
|
|
|
- the seek stage. Finishes by printing the number of commandActions that
|
|
|
|
|
- failed. -}
|
2014-01-29 17:44:53 +00:00
|
|
|
performCommandAction :: Command -> CmdParams -> Annex ()
|
|
|
|
|
performCommandAction Command { cmdseek = seek, cmdcheck = c, cmdname = name } params = do
|
fix inversion of control in CommandSeek (no behavior changes)
I've been disliking how the command seek actions were written for some
time, with their inversion of control and ugly workarounds.
The last straw to fix it was sync --content, which didn't fit the
Annex [CommandStart] interface well at all. I have not yet made it take
advantage of the changed interface though.
The crucial change, and probably why I didn't do it this way from the
beginning, is to make each CommandStart action be run with exceptions
caught, and if it fails, increment a failure counter in annex state.
So I finally remove the very first code I wrote for git-annex, which
was before I had exception handling in the Annex monad, and so ran outside
that monad, passing state explicitly as it ran each CommandStart action.
This was a real slog from 1 to 5 am.
Test suite passes.
Memory usage is lower than before, sometimes by a couple of megabytes, and
remains constant, even when running in a large repo, and even when
repeatedly failing and incrementing the error counter. So no accidental
laziness space leaks.
Wall clock speed is identical, even in large repos.
This commit was sponsored by an anonymous bitcoiner.
2014-01-20 08:11:42 +00:00
|
|
|
mapM_ runCheck c
|
|
|
|
|
Annex.changeState $ \s -> s { Annex.errcounter = 0 }
|
|
|
|
|
seek params
|
|
|
|
|
showerrcount =<< Annex.getState Annex.errcounter
|
|
|
|
|
where
|
|
|
|
|
showerrcount 0 = noop
|
|
|
|
|
showerrcount cnt = error $ name ++ ": " ++ show cnt ++ " failed"
|
|
|
|
|
|
|
|
|
|
{- Runs one of the actions needed to perform a command.
|
|
|
|
|
- Individual actions can fail without stopping the whole command,
|
|
|
|
|
- including by throwing IO errors (but other errors terminate the whole
|
|
|
|
|
- command).
|
|
|
|
|
-
|
|
|
|
|
- This should only be run in the seek stage. -}
|
2014-01-20 17:31:03 +00:00
|
|
|
commandAction :: CommandActionRunner
|
unify exception handling into Utility.Exception
Removed old extensible-exceptions, only needed for very old ghc.
Made webdav use Utility.Exception, to work after some changes in DAV's
exception handling.
Removed Annex.Exception. Mostly this was trivial, but note that
tryAnnex is replaced with tryNonAsync and catchAnnex replaced with
catchNonAsync. In theory that could be a behavior change, since the former
caught all exceptions, and the latter don't catch async exceptions.
However, in practice, nothing in the Annex monad uses async exceptions.
Grepping for throwTo and killThread only find stuff in the assistant,
which does not seem related.
Command.Add.undo is changed to accept a SomeException, and things
that use it for rollback now catch non-async exceptions, rather than
only IOExceptions.
2014-08-08 01:55:44 +00:00
|
|
|
commandAction a = account =<< tryIO go
|
fix inversion of control in CommandSeek (no behavior changes)
I've been disliking how the command seek actions were written for some
time, with their inversion of control and ugly workarounds.
The last straw to fix it was sync --content, which didn't fit the
Annex [CommandStart] interface well at all. I have not yet made it take
advantage of the changed interface though.
The crucial change, and probably why I didn't do it this way from the
beginning, is to make each CommandStart action be run with exceptions
caught, and if it fails, increment a failure counter in annex state.
So I finally remove the very first code I wrote for git-annex, which
was before I had exception handling in the Annex monad, and so ran outside
that monad, passing state explicitly as it ran each CommandStart action.
This was a real slog from 1 to 5 am.
Test suite passes.
Memory usage is lower than before, sometimes by a couple of megabytes, and
remains constant, even when running in a large repo, and even when
repeatedly failing and incrementing the error counter. So no accidental
laziness space leaks.
Wall clock speed is identical, even in large repos.
This commit was sponsored by an anonymous bitcoiner.
2014-01-20 08:11:42 +00:00
|
|
|
where
|
|
|
|
|
go = do
|
|
|
|
|
Annex.Queue.flushWhenFull
|
2014-01-29 17:44:53 +00:00
|
|
|
callCommandAction a
|
unify exception handling into Utility.Exception
Removed old extensible-exceptions, only needed for very old ghc.
Made webdav use Utility.Exception, to work after some changes in DAV's
exception handling.
Removed Annex.Exception. Mostly this was trivial, but note that
tryAnnex is replaced with tryNonAsync and catchAnnex replaced with
catchNonAsync. In theory that could be a behavior change, since the former
caught all exceptions, and the latter don't catch async exceptions.
However, in practice, nothing in the Annex monad uses async exceptions.
Grepping for throwTo and killThread only find stuff in the assistant,
which does not seem related.
Command.Add.undo is changed to accept a SomeException, and things
that use it for rollback now catch non-async exceptions, rather than
only IOExceptions.
2014-08-08 01:55:44 +00:00
|
|
|
account (Right True) = return True
|
|
|
|
|
account (Right False) = incerr
|
|
|
|
|
account (Left err) = do
|
fix inversion of control in CommandSeek (no behavior changes)
I've been disliking how the command seek actions were written for some
time, with their inversion of control and ugly workarounds.
The last straw to fix it was sync --content, which didn't fit the
Annex [CommandStart] interface well at all. I have not yet made it take
advantage of the changed interface though.
The crucial change, and probably why I didn't do it this way from the
beginning, is to make each CommandStart action be run with exceptions
caught, and if it fails, increment a failure counter in annex state.
So I finally remove the very first code I wrote for git-annex, which
was before I had exception handling in the Annex monad, and so ran outside
that monad, passing state explicitly as it ran each CommandStart action.
This was a real slog from 1 to 5 am.
Test suite passes.
Memory usage is lower than before, sometimes by a couple of megabytes, and
remains constant, even when running in a large repo, and even when
repeatedly failing and incrementing the error counter. So no accidental
laziness space leaks.
Wall clock speed is identical, even in large repos.
This commit was sponsored by an anonymous bitcoiner.
2014-01-20 08:11:42 +00:00
|
|
|
showErr err
|
|
|
|
|
showEndFail
|
|
|
|
|
incerr
|
2014-01-20 17:31:03 +00:00
|
|
|
incerr = do
|
|
|
|
|
Annex.changeState $ \s ->
|
|
|
|
|
let ! c = Annex.errcounter s + 1
|
|
|
|
|
! s' = s { Annex.errcounter = c }
|
|
|
|
|
in s'
|
|
|
|
|
return False
|
fix inversion of control in CommandSeek (no behavior changes)
I've been disliking how the command seek actions were written for some
time, with their inversion of control and ugly workarounds.
The last straw to fix it was sync --content, which didn't fit the
Annex [CommandStart] interface well at all. I have not yet made it take
advantage of the changed interface though.
The crucial change, and probably why I didn't do it this way from the
beginning, is to make each CommandStart action be run with exceptions
caught, and if it fails, increment a failure counter in annex state.
So I finally remove the very first code I wrote for git-annex, which
was before I had exception handling in the Annex monad, and so ran outside
that monad, passing state explicitly as it ran each CommandStart action.
This was a real slog from 1 to 5 am.
Test suite passes.
Memory usage is lower than before, sometimes by a couple of megabytes, and
remains constant, even when running in a large repo, and even when
repeatedly failing and incrementing the error counter. So no accidental
laziness space leaks.
Wall clock speed is identical, even in large repos.
This commit was sponsored by an anonymous bitcoiner.
2014-01-20 08:11:42 +00:00
|
|
|
|
2014-01-20 17:31:03 +00:00
|
|
|
{- Runs a single command action through the start, perform and cleanup
|
|
|
|
|
- stages, without catching errors. Useful if one command wants to run
|
|
|
|
|
- part of another command. -}
|
2014-01-29 17:44:53 +00:00
|
|
|
callCommandAction :: CommandActionRunner
|
|
|
|
|
callCommandAction = start
|
fix inversion of control in CommandSeek (no behavior changes)
I've been disliking how the command seek actions were written for some
time, with their inversion of control and ugly workarounds.
The last straw to fix it was sync --content, which didn't fit the
Annex [CommandStart] interface well at all. I have not yet made it take
advantage of the changed interface though.
The crucial change, and probably why I didn't do it this way from the
beginning, is to make each CommandStart action be run with exceptions
caught, and if it fails, increment a failure counter in annex state.
So I finally remove the very first code I wrote for git-annex, which
was before I had exception handling in the Annex monad, and so ran outside
that monad, passing state explicitly as it ran each CommandStart action.
This was a real slog from 1 to 5 am.
Test suite passes.
Memory usage is lower than before, sometimes by a couple of megabytes, and
remains constant, even when running in a large repo, and even when
repeatedly failing and incrementing the error counter. So no accidental
laziness space leaks.
Wall clock speed is identical, even in large repos.
This commit was sponsored by an anonymous bitcoiner.
2014-01-20 08:11:42 +00:00
|
|
|
where
|
|
|
|
|
start = stage $ maybe skip perform
|
|
|
|
|
perform = stage $ maybe failure cleanup
|
|
|
|
|
cleanup = stage $ status
|
|
|
|
|
stage = (=<<)
|
|
|
|
|
skip = return True
|
|
|
|
|
failure = showEndFail >> return False
|
|
|
|
|
status r = showEndResult r >> return r
|