git-annex/doc/design/external_special_remote_protocol.mdwn

Communication between git-annex and a program implementing an external
special remote uses this protocol.

[[!toc]]

## starting the program

The external special remote program has a name like
`git-annex-remote-$bar`. When 
`git annex initremote foo type=external externaltype=$bar` is run,
git-annex finds the appropriate program in PATH.

The program is started by git-annex when it needs to access the special
remote, and may be left running for a long period of time. This allows
it to perform expensive setup tasks, etc. Note that git-annex may choose to
start multiple instances of the program (eg, when multiple git-annex
commands are run concurrently in a repository).

## protocol overview

Communication is via stdin and stdout. Therefore, the external special
remote must avoid doing any prompting, or outputting anything like eg,
progress to stdout. (Such stuff can be sent to stderr instead.)

The protocol is line based. Messages are sent in either direction, from
git-annex to the special remote, and from the special remote to git-annex.

In order to avoid confusing interactions, one or the other has control
at any given time, and is responsible for sending requests, while the other
only sends replies to the requests.

Each protocol line starts with a command, which is followed by the
command's parameters (a fixed number per command), each separated by a
single space. The last parameter may contain spaces. Parameters may be
empty, but the separating spaces are still required in that case.

## example session

The special remote is responsible for sending the first message, indicating
the version of the protocol it is using.

	VERSION 1

Recent versions of git-annex respond with a message indicating
protocol extensions that it supports. Older versions of
git-annex do not send this message. 

	EXTENSIONS INFO

The special remote can respond to that with its own EXTENSIONS message, which
could have its own protocol extension details, but none are currently used.
(It's also fine to reply with UNSUPPORTED-REQUEST.)

	EXTENSIONS 

Next, git-annex will generally send a message telling the special
remote to start up. (Or it might send an INITREMOTE or EXPORTSUPPORTED,
or perhaps other things in the future, so don't hardcode this order.)

	PREPARE

The special remote can now ask git-annex for its configuration, as needed,
and check that it's valid. git-annex responds with the configuration values

	GETCONFIG directory
	VALUE /media/usbdrive/repo
	GETCONFIG automount
	VALUE true

Once the special remote is satisfied with its configuration and is
ready to go, it tells git-annex that it's done with the PREPARE step:

	PREPARE-SUCCESS

Now git-annex will make a request. Let's suppose it wants to store a key. 

	TRANSFER STORE somekey tmpfile

The special remote can then start reading the tmpfile and storing it.
While it's doing that, the special remote can send messages back to 
git-annex to indicate what it's doing, or ask for other information.
It will typically send progress messages, indicating how many
bytes have been sent:

	PROGRESS 10240
	PROGRESS 20480

Once the key has been stored, the special remote tells git-annex the result:

	TRANSFER-SUCCESS STORE somekey

Now git-annex will send its next request.

Once git-annex is done with the special remote, it will close its stdin.
The special remote program can then exit.

## git-annex request messages

These are messages git-annex sends to the special remote program.
None of these messages require an immediate reply. The special
remote can send any messages it likes while handling the requests.

Once the special remote has finished performing the request, it should
send one of the corresponding replies listed in the next section.

The following requests *must* all be supported by the special remote.

* `INITREMOTE`  
  Requests the remote to initialize itself. This is where any one-time
  setup tasks can be done, for example creating an Amazon S3 bucket.  
  Note: This may be run repeatedly over time, as a remote is initialized in
  different repositories, or as the configuration of a remote is changed.
  (Both `git annex initremote` and `git-annex enableremote` run this.)
  So any one-time setup tasks should be done idempotently.
* `PREPARE`  
  Tells the remote that it's time to prepare itself to be used.  
  Only EXTENSIONS and INITREMOTE or EXPORTSUPPORTED can come before this.
* `TRANSFER STORE|RETRIEVE Key File`  
  Requests the transfer of a key. For STORE, the File is the file to upload;
  for RETRIEVE the File is where to store the download.  
  Note that the File should not influence the filename used on the remote.  
  Note that in some cases, the File may contain whitespace.  
  Note that it's important that, while a Key is being stored, CHECKPRESENT
  not indicate it's present until all the data has been transferred.  
* `CHECKPRESENT Key`  
  Requests the remote to check if a key is present in it.
* `REMOVE Key`  
  Requests the remote to remove a key's contents.

The following requests can optionally be supported. If not handled,
replying with `UNSUPPORTED-REQUEST` is acceptable.

* `EXTENSIONS List`  
  Sent to indicate protocol extensions which git-annex is capable
  of using. The list is a space-delimited list of protocol extension
  keywords. The remote can reply to this with its own EXTENSIONS list.
* `GETCOST`  
  Requests the remote to return a use cost. Higher costs are more expensive.
  (See Config/Cost.hs for some standard costs.)
* `GETAVAILABILITY`
  Requests the remote to send back an `AVAILABILITY` reply.
  If the remote replies with `UNSUPPORTED-REQUEST`, its availability
  is assumed to be global. So, only remotes that are only reachable
  locally need to worry about implementing this.
* `CLAIMURL Url`  
  Asks the remote if it wishes to claim responsibility for downloading
  an url. If so, the remote should send back an `CLAIMURL-SUCCESS` reply.
  If not, it can send `CLAIMURL-FAILURE`.
* `CHECKURL Url`  
  Asks the remote to check if the url's content can currently be downloaded
  (without downloading it). The remote replies with one of `CHECKURL-FAILURE`,
  `CHECKURL-CONTENTS`, or `CHECKURL-MULTI`.
* `WHEREIS Key`
  Asks the remote to provide additional information about ways to access
  the content of a key stored in it, such as eg, public urls.
  This will be displayed to the user by eg, `git annex whereis`. The remote
  replies with `WHEREIS-SUCCESS` or `WHEREIS-FAILURE`.  
  Note that users expect `git annex whereis` to run fast, without eg,
  network access.  
  This is not needed when `SETURIPRESENT` is used, since such uris are
  automatically displayed by `git annex whereis`.  
* `GETINFO`  
  Requests the remote to send some information describing its
  configuration, for display by `git annex info`.  
  Reply with a series of `INFOFIELD` each followed by `INFOVALUE`,
  and concluded with `INFOEND`.
* `EXPORTSUPPORTED`  
  Used to check if a special remote supports exports. The remote
  responds with either `EXPORTSUPPORTED-SUCCESS` or
  `EXPORTSUPPORTED-FAILURE`. Note that this request may be made before
  or after `PREPARE`.
* `EXPORT Name`  
  Comes immediately before each of the following export-related requests, 
  specifying the name of the exported file. It will be in the form
  of a relative path, and may contain path separators, whitespace,
  and other special characters.  
  No response is made to this message.
* `TRANSFEREXPORT STORE|RETRIEVE Key File`  
  Requests the transfer of a File on local disk to or from the previously 
  provided Name on the special remote.  
  Note that it's important that, while a file is being stored,
  CHECKPRESENTEXPORT not indicate it's present until all the data has
  been transferred.  
  The remote responds with either `TRANSFER-SUCCESS` or
  `TRANSFER-FAILURE`, and a remote where exports do not make sense
  may always fail.
* `CHECKPRESENTEXPORT Key`  
  Requests the remote to check if the previously provided Name is present
  in it.  
  The remote responds with `CHECKPRESENT-SUCCESS`, `CHECKPRESENT-FAILURE`,
  or `CHECKPRESENT-UNKNOWN`.
* `REMOVEEXPORT Key`  
  Requests the remote to remove content stored by `TRANSFEREXPORT`
  with the previously provided Name.  
  The remote responds with either `REMOVE-SUCCESS` or
  `REMOVE-FAILURE`.  
  If the content was already not present in the remote, it should
  respond with `REMOVE-SUCCESS`.
* `REMOVEEXPORTDIRECTORY Directory`  
  Requests the remote remove an exported directory.  
  If the remote does not use directories, or automatically cleans up
  empty directories, this does not need to be implemented.  
  The directory will be in the form of a relative path, and may contain path
  separators, whitespace, and other special characters.  
  Typically the directory will be empty, but it could possibly contain
  files or other directories, and it's ok to remove those.  
  The remote responds with either `REMOVEEXPORTDIRECTORY-SUCCESS`
  or `REMOVEEXPORTDIRECTORY-FAILURE`.  
  Should not fail if the directory was already removed.
* `RENAMEEXPORT Key NewName`  
  Requests the remote rename a file stored on it from the previously
  provided Name to the NewName.  
  The remote responds with `RENAMEEXPORT-SUCCESS` or
  `RENAMEEXPORT-FAILURE` or with `UNSUPPORTED-REQUEST` if renaming is not
  supported.

To support old external special remote programs that have not been updated
to support exports, git-annex will need to handle an `ERROR` response
when using any of the above.

More optional requests may be added, without changing the protocol version,
so if an unknown request is seen, reply with `UNSUPPORTED-REQUEST`.

## special remote replies

These should be sent only in response to the git-annex request messages.
They do not have to be sent immediately after the request; the special
remote can send its own messages (listed in the next section below)
while it's handling a request.

* `PREPARE-SUCCESS`  
  Sent as a response to PREPARE once the special remote is ready for use.
* `PREPARE-FAILURE ErrorMsg`
  Sent as a response to PREPARE if the special remote cannot be used.
* `TRANSFER-SUCCESS STORE|RETRIEVE Key`  
  Indicates the transfer completed successfully.
* `TRANSFER-FAILURE STORE|RETRIEVE Key ErrorMsg`  
  Indicates the transfer failed.
* `CHECKPRESENT-SUCCESS Key`  
  Indicates that a key has been positively verified to be present in the
  remote.
* `CHECKPRESENT-FAILURE Key`  
  Indicates that a key has been positively verified to not be present in the
  remote.
* `CHECKPRESENT-UNKNOWN Key ErrorMsg`  
  Indicates that it is not currently possible to verify if the key is
  present in the remote. (Perhaps the remote cannot be contacted.)
* `REMOVE-SUCCESS Key`  
  Indicates the key has been removed from the remote. May be returned if
  the remote didn't have the key at the point removal was requested.
* `REMOVE-FAILURE Key ErrorMsg`  
  Indicates that the key was unable to be removed from the remote.
* `EXTENSIONS List`  
  Sent in response to a EXTENSIONS request, the List could be used to indicate
  protocol extensions that the special remote uses, but there are currently
  no such extensions, so the List is empty.
* `COST Int`  
  Indicates the cost of the remote.
* `AVAILABILITY GLOBAL|LOCAL`
  Indicates if the remote is globally or only locally available.
  (Ie stored in the cloud vs on a local disk.)
* `INITREMOTE-SUCCESS`  
  Indicates the INITREMOTE succeeded and the remote is ready to use.
* `INITREMOTE-FAILURE ErrorMsg`  
  Indicates that INITREMOTE failed.
* `CLAIMURL-SUCCESS`  
  Indicates that the CLAIMURL url will be handled by this remote.
* `CLAIMURL-FAILURE`  
  Indicates that the CLAIMURL url wil not be handled by this remote.
* `CHECKURL-CONTENTS Size|UNKNOWN Filename`  
  Indicates that the requested url has been verified to exist.  
  The Size is the size in bytes, or use "UNKNOWN" if the size could not be
  determined.  
  The Filename can be empty (in which case a default is used),
  or can specify a filename that is suggested to be used for this url.
* `CHECKURL-MULTI Url1 Size1|UNKNOWN Filename1 Url2 Size2|UNKNOWN Filename2 ...`  
  Indicates that the requested url has been verified to exist,
  and contains multiple files, which can each be accessed using
  their own url.  Each triplet of url, size, and filename should be listed,
  one after the other.
  Note that since a list is returned, neither the Url nor the Filename
  can contain spaces.
* `CHECKURL-FAILURE`  
  Indicates that the requested url could not be accessed.
* `WHEREIS-SUCCESS String`  
  Indicates a location of a key. Typically an url, the string can
  be anything that it makes sense to display to the user about content
  stored in the special remote.
* `WHEREIS-FAILURE`  
  Indicates that no location is known for a key.
* `INFOFIELD` / `INFOVALUE` / `INFOEND`  
  Reply to a GETINFO request. This can be used to add info about anything,
  but things like an url to the remote, or details of the remote's
  configuration are typical. It should not include any sensitive
  information like passwords, since it will be displayed to the user's
  screen.
  
  There can be zero or more `INFOFIELD` messages, each containing the name of 
  a field, and each is immediately followed by an `INFOVALUE` message
  containing its value. The sequence is concluded by `INFOEND`. For example:
	
	INFOFIELD repository location
	INFOVALUE http://example.com/repo/
	INFOFIELD datacenter
	INFOVALUE Antarctica
	INFOEND
	
* `EXPORTSUPPORTED-SUCCESS`  
  Indicates that it makes sense to use this special remote as an export.
* `EXPORTSUPPORTED-FAILURE`  
  Indicates that it does not make sense to use this special remote as an
  export.
* `RENAMEEXPORT-SUCCESS Key`  
  Indicates that a `RENAMEEXPORT` was done successfully.
* `RENAMEEXPORT-FAILURE Key`  
  Indicates that a `RENAMEEXPORT` failed for whatever reason.
* `REMOVEEXPORTDIRECTORY-SUCCESS`  
  Indicates that a `REMOVEEXPORTDIRECTORY` was done successfully.
* `REMOVEEXPORTDIRECTORY-FAILURE`  
  Indicates that a `REMOVEEXPORTDIRECTORY` failed for whatever reason.
* `UNSUPPORTED-REQUEST`  
  Indicates that the special remote does not know how to handle a request,
  or cannot handle the request.

## special remote messages

These messages may be sent by the special remote at any time that it's
handling a request.

* `VERSION Int`  
  Supported protocol version. Current version is 1. Must be sent first
  thing at startup, as until it sees this git-annex does not know how to
  talk with the special remote program!  
  (git-annex does not send a reply to this message, but may give up if it
  doesn't support the necessary protocol version.)
* `PROGRESS Int`  
  Indicates the current progress of the transfer (in bytes). May be repeated
  any number of times during the transfer process, but it's wasteful to
  update the progress until at least another 1% of the file has been sent.
  This is highly recommended for STORE. (It is optional but good for RETRIEVE.)  
  (git-annex does not send a reply to this message.)
* `DIRHASH Key`  
  Gets a two level hash associated with a Key. Something like "aB/Cd".
  This is always the same for any given Key, so can be used for eg,
  creating hash directory structures to store Keys in. This is the same
  directory hash that git-annex uses inside `.git/annex/objects/`  
  (git-annex replies with VALUE followed by the value.)
* `DIRHASH-LOWER Key`  
  Gets a two level hash associated with a Key, using only lower-case.
  Something like "abc/def".
  This is always the same for any given Key, so can be used for eg,
  creating hash directory structures to store Keys in. This is the same
  directory hash that is used by eg, the directory special remote.  
  (git-annex replies with VALUE followed by the value.)  
  (First supported by git-annex version 6.20160511.)
* `SETCONFIG Setting Value`  
  Sets one of the special remote's configuration settings.  
  Normally this is sent during INITREMOTE, which allows these settings
  to be stored in the git-annex branch, so will be available if the same
  special remote is used elsewhere. (If sent after INITREMOTE, the changed
  configuration will only be available while the remote is running.)  
  (git-annex does not send a reply to this message.)
* `GETCONFIG Setting`  
  Gets one of the special remote's configuration settings, which can have
  been passed by the user when running `git annex initremote`, or
  can have been set by a previous SETCONFIG. Can be run at any time.  
  (git-annex replies with VALUE followed by the value. If the setting is
  not set, the value will be empty.)
* `SETCREDS Setting User Password`  
  When some form of user and password is needed to access a special remote,
  this can be used to securely store them for later use.
  (Like SETCONFIG, this is normally sent only during INITREMOTE.)  
  The Setting indicates which value in a remote's configuration can be
  used to store the creds.  
  Note that creds are normally only stored in the remote's configuration
  when it's surely safe to do so; when gpg encryption is used, in which
  case the creds will be encrypted using it. If creds are not stored in
  the configuration, they'll only be stored in a local file.  
  (embedcreds can be set to yes by the user or by SETCONFIG to force
   the creds to be stored in the remote's configuration).  
  (git-annex does not send a reply to this message.)
* `GETCREDS Setting`  
  Gets any creds that were previously stored in the remote's configuration
  or a file.
  (git-annex replies with "CREDS User Password". If no creds are found,
  User and Password are both empty.)
* `GETUUID`  
  Queries for the UUID of the special remote being used.  
  (git-annex replies with VALUE followed by the UUID.)
* `GETGITDIR`  
  Queries for the path to the git directory of the repository that
  is using the external special remote.
  (git-annex replies with VALUE followed by the path.)
* `SETWANTED PreferredContentExpression`  
  Can be used to set the preferred content of a repository. Normally
  this is not configured by a special remote, but it may make sense
  in some situations to hint at the kind of content that should be stored
  in the special remote. Note that if a unparsable expression is set,
  git-annex will ignore it.  
  (git-annex does not send a reply to this message.)
* `GETWANTED`  
  Gets the current preferred content setting of the repository.
  (git-annex replies with VALUE followed by the preferred content
  expression.)
* `SETSTATE Key Value`  
  Can be used to store some form of state for a Key. The state stored
  can be anything this remote needs to store, in any format.
  It is stored in the git-annex branch. Note that this means that if
  multiple repositories are using the same special remote, and store
  different state, whichever one stored the state last will win. Also,
  it's best to avoid storing much state, since this will bloat the
  git-annex branch. Most remotes will not need to store any state.  
  (git-annex does not send a reply to this message.)
* `GETSTATE Key`  
  Gets any state that has been stored for the key.  
  (git-annex replies with VALUE followed by the state.)
* `SETURLPRESENT Key Url`  
  Records an URL where the Key can be downloaded from.  
  Note that this does not make git-annex think that the url is present on
  the web special remote.  
  Keep in mind that this stores the url in the git-annex branch. This can
  result in bloat to the branch if the url is large and/or does not delta
  pack well with other information (such as the names of keys) already
  stored in the branch.  
  (git-annex does not send a reply to this message.)
* `SETURLMISSING Key Url`  
  Records that the key can no longer be downloaded from the specified
  URL.  
  (git-annex does not send a reply to this message.)
* `SETURIPRESENT Key Uri`  
  Records an URI where the Key can be downloaded from.  
  For example, "ipfs:ADDRESS" is used for the ipfs special remote;
  its CLAIMURL handler checks for such URIS and claims them.  
  (git-annex does not send a reply to this message.)
* `SETURIMISSING Key Uri`  
  Records that the key can no longer be downloaded from the specified
  URI.  
  (git-annex does not send a reply to this message.)
* `GETURLS Key Prefix`  
  Gets the recorded urls where a Key can be downloaded from.
  Only urls that start with the Prefix will be returned. The Prefix
  may be empty to get all urls.
  (git-annex replies one or more times with VALUE for each url.
  The final VALUE has an empty value, indicating the end of the url list.)
* `DEBUG message`
  Tells git-annex to display the message if --debug is enabled.  
  (git-annex does not send a reply to this message.)

These messages are protocol extensions; it's only safe to send them to
git-annex after it sent a EXTENSIONS that included the name of the message.

* `INFO message`
  Tells git-annex to display the message to the user.  
  When git-annex is in --json mode, the message will be emitted immediately
  in its own json object, with an "info" field.  
  (git-annex does not send a reply to this message.)  

## general messages

These messages can be sent at any time by either git-annex or the special
remote.

* `ERROR ErrorMsg`  
  Generic error. Can be sent at any time if things get too messed up
  to continue. When possible, use a more specific reply from the list above.  
  The special remote program should exit after sending this, as
  git-annex will not talk to it any further. If the program receives
  an ERROR from git-annex, it can exit with its own ERROR.

## long running network connections

Since an external special remote is started only when git-annex needs to
access the remote, and then left running, it's ok to open a network
connection in the PREPARE stage, and continue to use that network
connection as requests are made.

If you're unable to open a network connection, or the connection closes,
perhaps because the network is down, it's ok to fail to perform any
requests. Or you can try to reconnect when a new request is made.

Note that the external special remote program may be left running for
quite a long time, especially when the git-annex assistant is using it.
The assistant will detect when the system connects to a network, and will
start a new process the next time it needs to use a remote.

## readonly mode

Some storage services allow downloading the content of a file using a
regular http connection, with no authentication. An external special remote
for such a storage service can support a readonly mode of operation.

It works like this:

* When a key's content is stored on the remote, use SETURLPRESENT to
  tell git-annex the public url from which it can be downloaded.
* When a key's content is removed from the remote, use SETURLMISSING.
* Document that this external special remote can be used in readonly mode.

  The user doesn't even need to install your external special remote
  program to use such a remote! All they need to do is run:
  `git annex enableremote $remotename readonly=true`

* The readonly=true parameter makes git-annex download content from the
  urls recorded earlier by SETURLPRESENT.

## TODO

* When storing encrypted files stream the file up/down the pipe, rather
  than using a temp file. Will probably involve less space and disk IO, 
  and makes the progress display better, since the encryption can happen
  concurrently with the transfer. Also, no need to use PROGRESS in this
  scenario, since git-annex can see how much data it has sent/received from
  the remote. However, \n and probably \0 need to be escaped somehow in the
  file data, which adds complication.
* uuid discovery during INITREMOTE.
* Hook into webapp. Needs a way to provide some kind of prompt to the user
  in the webapp, etc.