mirrors/git-annex
2
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity Actions
git-annex/Logs/RemoteState.hs

46 lines
1.2 KiB
Haskell
Raw Normal View History

add remote state logs This allows a remote to store a piece of arbitrary state associated with a key. This is needed to support Tahoe, where the file-cap is calculated from the data stored in it, and used to retrieve a key later. Glacier also would be much improved by using this. GETSTATE and SETSTATE are added to the external special remote protocol. Note that the state is left as-is even when a key is removed from a remote. It's up to the remote to decide when it wants to clear the state. The remote state log, $KEY.log.rmt, is a UUID-based log. However, rather than using the old UUID-based log format, I created a new variant of that format. The new varient is more space efficient (since it lacks the "timestamp=" hack, and easier to parse (and the parser doesn't mess with whitespace in the value), and avoids compatability cruft in the old one. This seemed worth cleaning up for these new files, since there could be a lot of them, while before UUID-based logs were only used for a few log files at the top of the git-annex branch. The transition code has also been updated to handle these new UUID-based logs. This commit was sponsored by Daniel Hofer.
2014-01-03 20:35:57 +00:00
{- Remote state logs.
-
converting more log files to use Builder Probably not any particular speedup in this, since most of these logs are not written to often. Possibly chunk log writing is sped up, but writes to chunk logs are interleaved with expensive data transfers to remotes, so unlikely to be a noticiable speedup.
2019-01-09 17:06:37 +00:00
- Copyright 2014, 2019 Joey Hess <id@joeyh.name>
add remote state logs This allows a remote to store a piece of arbitrary state associated with a key. This is needed to support Tahoe, where the file-cap is calculated from the data stored in it, and used to retrieve a key later. Glacier also would be much improved by using this. GETSTATE and SETSTATE are added to the external special remote protocol. Note that the state is left as-is even when a key is removed from a remote. It's up to the remote to decide when it wants to clear the state. The remote state log, $KEY.log.rmt, is a UUID-based log. However, rather than using the old UUID-based log format, I created a new variant of that format. The new varient is more space efficient (since it lacks the "timestamp=" hack, and easier to parse (and the parser doesn't mess with whitespace in the value), and avoids compatability cruft in the old one. This seemed worth cleaning up for these new files, since there could be a lot of them, while before UUID-based logs were only used for a few log files at the top of the git-annex branch. The transition code has also been updated to handle these new UUID-based logs. This commit was sponsored by Daniel Hofer.
2014-01-03 20:35:57 +00:00
-
update licenses from GPL to AGPL This does not change the overall license of the git-annex program, which was already AGPL due to a number of sources files being AGPL already. Legally speaking, I'm adding a new license under which these files are now available; I already released their current contents under the GPL license. Now they're dual licensed GPL and AGPL. However, I intend for all my future changes to these files to only be released under the AGPL license, and I won't be tracking the dual licensing status, so I'm simply changing the license statement to say it's AGPL. (In some cases, others wrote parts of the code of a file and released it under the GPL; but in all cases I have contributed a significant portion of the code in each file and it's that code that is getting the AGPL license; the GPL license of other contributors allows combining with AGPL code.)
2019-03-13 19:48:14 +00:00
- Licensed under the GNU AGPL version 3 or higher.
add remote state logs This allows a remote to store a piece of arbitrary state associated with a key. This is needed to support Tahoe, where the file-cap is calculated from the data stored in it, and used to retrieve a key later. Glacier also would be much improved by using this. GETSTATE and SETSTATE are added to the external special remote protocol. Note that the state is left as-is even when a key is removed from a remote. It's up to the remote to decide when it wants to clear the state. The remote state log, $KEY.log.rmt, is a UUID-based log. However, rather than using the old UUID-based log format, I created a new variant of that format. The new varient is more space efficient (since it lacks the "timestamp=" hack, and easier to parse (and the parser doesn't mess with whitespace in the value), and avoids compatability cruft in the old one. This seemed worth cleaning up for these new files, since there could be a lot of them, while before UUID-based logs were only used for a few log files at the top of the git-annex branch. The transition code has also been updated to handle these new UUID-based logs. This commit was sponsored by Daniel Hofer.
2014-01-03 20:35:57 +00:00
-}
module Logs.RemoteState (
getRemoteState,
setRemoteState,
) where
remove 163 lines of code without changing anything except imports
2016-01-20 20:36:33 +00:00
import Annex.Common
add remote state logs This allows a remote to store a piece of arbitrary state associated with a key. This is needed to support Tahoe, where the file-cap is calculated from the data stored in it, and used to retrieve a key later. Glacier also would be much improved by using this. GETSTATE and SETSTATE are added to the external special remote protocol. Note that the state is left as-is even when a key is removed from a remote. It's up to the remote to decide when it wants to clear the state. The remote state log, $KEY.log.rmt, is a UUID-based log. However, rather than using the old UUID-based log format, I created a new variant of that format. The new varient is more space efficient (since it lacks the "timestamp=" hack, and easier to parse (and the parser doesn't mess with whitespace in the value), and avoids compatability cruft in the old one. This seemed worth cleaning up for these new files, since there could be a lot of them, while before UUID-based logs were only used for a few log files at the top of the git-annex branch. The transition code has also been updated to handle these new UUID-based logs. This commit was sponsored by Daniel Hofer.
2014-01-03 20:35:57 +00:00
import Logs
import Logs.UUIDBased
import qualified Annex.Branch
implement annex.tune.branchhash1 I hope this doesn't impact speed much -- it does have to pull out a value from Annex state every time it accesses the branch now. The test case I dropped has never caught any problems that I can remember, and would have been rather difficult to convert.
2015-01-28 21:17:26 +00:00
import qualified Annex
add remote state logs This allows a remote to store a piece of arbitrary state associated with a key. This is needed to support Tahoe, where the file-cap is calculated from the data stored in it, and used to retrieve a key later. Glacier also would be much improved by using this. GETSTATE and SETSTATE are added to the external special remote protocol. Note that the state is left as-is even when a key is removed from a remote. It's up to the remote to decide when it wants to clear the state. The remote state log, $KEY.log.rmt, is a UUID-based log. However, rather than using the old UUID-based log format, I created a new variant of that format. The new varient is more space efficient (since it lacks the "timestamp=" hack, and easier to parse (and the parser doesn't mess with whitespace in the value), and avoids compatability cruft in the old one. This seemed worth cleaning up for these new files, since there could be a lot of them, while before UUID-based logs were only used for a few log files at the top of the git-annex branch. The transition code has also been updated to handle these new UUID-based logs. This commit was sponsored by Daniel Hofer.
2014-01-03 20:35:57 +00:00
import qualified Data.Map as M
attoparsec parsers for all new-format uuid-based logs There should be some speed gains here, especially for chunk and remote state logs, which are queried once per key. Now only old-format uuid-based logs still need to be converted to attoparsec.
2019-01-10 17:23:42 +00:00
import qualified Data.ByteString.Lazy as L
import qualified Data.Attoparsec.ByteString.Lazy as A
converting more log files to use Builder Probably not any particular speedup in this, since most of these logs are not written to often. Possibly chunk log writing is sped up, but writes to chunk logs are interleaved with expensive data transfers to remotes, so unlikely to be a noticiable speedup.
2019-01-09 17:06:37 +00:00
import Data.ByteString.Builder
add remote state logs This allows a remote to store a piece of arbitrary state associated with a key. This is needed to support Tahoe, where the file-cap is calculated from the data stored in it, and used to retrieve a key later. Glacier also would be much improved by using this. GETSTATE and SETSTATE are added to the external special remote protocol. Note that the state is left as-is even when a key is removed from a remote. It's up to the remote to decide when it wants to clear the state. The remote state log, $KEY.log.rmt, is a UUID-based log. However, rather than using the old UUID-based log format, I created a new variant of that format. The new varient is more space efficient (since it lacks the "timestamp=" hack, and easier to parse (and the parser doesn't mess with whitespace in the value), and avoids compatability cruft in the old one. This seemed worth cleaning up for these new files, since there could be a lot of them, while before UUID-based logs were only used for a few log files at the top of the git-annex branch. The transition code has also been updated to handle these new UUID-based logs. This commit was sponsored by Daniel Hofer.
2014-01-03 20:35:57 +00:00
type RemoteState = String
setRemoteState :: UUID -> Key -> RemoteState -> Annex ()
setRemoteState u k s = do
Added GIT_ANNEX_VECTOR_CLOCK environment variable Can be used to override the default timestamps used in log files in the git-annex branch. This is a dangerous environment variable; use with caution. Note that this only affects writing to the logs on the git-annex branch. It is not used for metadata in git commits (other env vars can be set for that). There are many other places where timestamps are still used, that don't get committed to git, but do touch disk. Including regular timestamps of files, and timestamps embedded in some files in .git/annex/, including the last fsck timestamp and timestamps in transfer log files. A good way to find such things in git-annex is to get for getPOSIXTime and getCurrentTime, although some of the results are of course false positives that never hit disk (unless git-annex gets swapped out..) So this commit does NOT necessarily make git-annex comply with some HIPPA privacy regulations; it's up to the user to determine if they can use it in a way compliant with such regulations. Benchmarking: It takes 0.00114 milliseconds to call getEnv "GIT_ANNEX_VECTOR_CLOCK" when that env var is not set. So, 100 thousand log files can be written with an added overhead of only 0.114 seconds. That should be by far swamped by the actual overhead of writing the log files and making the commit containing them. This commit was supported by the NSF-funded DataLad project.
2017-08-14 17:55:38 +00:00
c <- liftIO currentVectorClock
implement annex.tune.branchhash1 I hope this doesn't impact speed much -- it does have to pull out a value from Annex state every time it accesses the branch now. The test case I dropped has never caught any problems that I can remember, and would have been rather difficult to convert.
2015-01-28 21:17:26 +00:00
config <- Annex.getGitConfig
Annex.Branch.change (remoteStateLogFile config k) $
attoparsec parsers for all new-format uuid-based logs There should be some speed gains here, especially for chunk and remote state logs, which are queried once per key. Now only old-format uuid-based logs still need to be converted to attoparsec.
2019-01-10 17:23:42 +00:00
buildRemoteState . changeLog c u s . parseRemoteState
converting more log files to use Builder Probably not any particular speedup in this, since most of these logs are not written to often. Possibly chunk log writing is sped up, but writes to chunk logs are interleaved with expensive data transfers to remotes, so unlikely to be a noticiable speedup.
2019-01-09 17:06:37 +00:00
buildRemoteState :: Log RemoteState -> Builder
buildRemoteState = buildLogNew (byteString . encodeBS)
add remote state logs This allows a remote to store a piece of arbitrary state associated with a key. This is needed to support Tahoe, where the file-cap is calculated from the data stored in it, and used to retrieve a key later. Glacier also would be much improved by using this. GETSTATE and SETSTATE are added to the external special remote protocol. Note that the state is left as-is even when a key is removed from a remote. It's up to the remote to decide when it wants to clear the state. The remote state log, $KEY.log.rmt, is a UUID-based log. However, rather than using the old UUID-based log format, I created a new variant of that format. The new varient is more space efficient (since it lacks the "timestamp=" hack, and easier to parse (and the parser doesn't mess with whitespace in the value), and avoids compatability cruft in the old one. This seemed worth cleaning up for these new files, since there could be a lot of them, while before UUID-based logs were only used for a few log files at the top of the git-annex branch. The transition code has also been updated to handle these new UUID-based logs. This commit was sponsored by Daniel Hofer.
2014-01-03 20:35:57 +00:00
getRemoteState :: UUID -> Key -> Annex (Maybe RemoteState)
implement annex.tune.branchhash1 I hope this doesn't impact speed much -- it does have to pull out a value from Annex state every time it accesses the branch now. The test case I dropped has never caught any problems that I can remember, and would have been rather difficult to convert.
2015-01-28 21:17:26 +00:00
getRemoteState u k = do
config <- Annex.getGitConfig
attoparsec parsers for all new-format uuid-based logs There should be some speed gains here, especially for chunk and remote state logs, which are queried once per key. Now only old-format uuid-based logs still need to be converted to attoparsec.
2019-01-10 17:23:42 +00:00
extract . parseRemoteState
implement annex.tune.branchhash1 I hope this doesn't impact speed much -- it does have to pull out a value from Annex state every time it accesses the branch now. The test case I dropped has never caught any problems that I can remember, and would have been rather difficult to convert.
2015-01-28 21:17:26 +00:00
<$> Annex.Branch.get (remoteStateLogFile config k)
add remote state logs This allows a remote to store a piece of arbitrary state associated with a key. This is needed to support Tahoe, where the file-cap is calculated from the data stored in it, and used to retrieve a key later. Glacier also would be much improved by using this. GETSTATE and SETSTATE are added to the external special remote protocol. Note that the state is left as-is even when a key is removed from a remote. It's up to the remote to decide when it wants to clear the state. The remote state log, $KEY.log.rmt, is a UUID-based log. However, rather than using the old UUID-based log format, I created a new variant of that format. The new varient is more space efficient (since it lacks the "timestamp=" hack, and easier to parse (and the parser doesn't mess with whitespace in the value), and avoids compatability cruft in the old one. This seemed worth cleaning up for these new files, since there could be a lot of them, while before UUID-based logs were only used for a few log files at the top of the git-annex branch. The transition code has also been updated to handle these new UUID-based logs. This commit was sponsored by Daniel Hofer.
2014-01-03 20:35:57 +00:00
where
extract m = value <$> M.lookup u m
attoparsec parsers for all new-format uuid-based logs There should be some speed gains here, especially for chunk and remote state logs, which are queried once per key. Now only old-format uuid-based logs still need to be converted to attoparsec.
2019-01-10 17:23:42 +00:00
parseRemoteState :: L.ByteString -> Log RemoteState
parseRemoteState = parseLogNew (decodeBS <$> A.takeByteString)
Reference in a new issue Copy permalink