pmaports/main/postmarketos-mkinitfs/init_functions.sh
Attila Szöllősi 41fcf67bc5 postmarketos-base: Write /boot to /etc/fstab (#653)
Also removed fstab entry from nokia-rx51 post-install script.
2017-09-30 21:52:33 +00:00

325 lines
8.5 KiB
Bash

#!/bin/sh
# This file will be in /init_functions.sh inside the initramfs.
IP=172.16.42.1
TELNET_PORT=23
# Redirect stdout and stderr to logfile
setup_log() {
# Bail out if PMOS_NO_OUTPUT_REDIRECT is set
echo "### postmarketOS initramfs ###"
grep -q PMOS_NO_OUTPUT_REDIRECT /proc/cmdline && return
# Print a message about what is going on to the normal output
echo "NOTE: All output from the initramfs gets redirected to:"
echo "/pmOS_init.log"
echo "If you want to disable this behavior (e.g. because you're"
echo "debugging over serial), please add this to your kernel"
echo "command line: PMOS_NO_OUTPUT_REDIRECT"
# Start redirect, print the first line again
exec >/pmOS_init.log 2>&1
echo "### postmarketOS initramfs ###"
}
mount_proc_sys_dev() {
# mdev
mount -t proc -o nodev,noexec,nosuid proc /proc
mount -t sysfs -o nodev,noexec,nosuid sysfs /sys
mkdir /config
mount -t configfs -o nodev,noexec,nosuid configfs /config
# /dev/pts (needed for telnet)
mkdir -p /dev/pts
mount -t devpts devpts /dev/pts
}
setup_mdev() {
echo /sbin/mdev >/proc/sys/kernel/hotplug
mdev -s
}
mount_subpartitions() {
for i in /dev/mmcblk*; do
case "$(kpartx -l "$i" 2>/dev/null | wc -l)" in
2)
echo "Mount subpartitions of $i"
kpartx -afs "$i"
break
;;
*)
continue
;;
esac
done
}
find_root_partition() {
# The partition layout is one of the following:
# a) boot, root partitions on sdcard
# b) boot, root partition on the "system" partition (which has its
# own partition header! so we have partitions on partitions!)
#
# mount_subpartitions() must get executed before calling
# find_root_partition(), so partitions from b) also get found.
#
# However, after executing mount_subpartitions(), the partitions
# from a) get mounted to /dev/mapper - and then you can only use
# the ones from /dev/mapper, not the original partition paths (they
# will appear as busy when trying to mount them). This is an
# unwanted side-effect, that we must deal with.
# The subpartitions from b) get mounted to /dev/mapper, and this is
# what we want.
#
# To deal with the side-effect, we use the partitions from
# /dev/mapper first, and then fall back to partitions with all paths
# (in case the user inserted an SD card after mount_subpartitions()
# ran!).
# Try the partitions in /dev/mapper first.
for id in pmOS_root crypto_LUKS; do
DEVICE="$(blkid | grep /dev/mapper | grep "$id" \
| cut -d ":" -f 1)"
[ -z "$DEVICE" ] || break
done
# Then try all devices
if [ -z "$DEVICE" ]; then
for id in pmOS_root crypto_LUKS; do
DEVICE="$(blkid | grep "$id" | cut -d ":" -f 1)"
[ -z "$DEVICE" ] || break
done
fi
echo "$DEVICE"
}
find_boot_partition() {
findfs LABEL="pmOS_boot"
}
mount_boot_partition() {
partition=$(find_boot_partition)
if [ -z "$partition" ]; then
echo "ERROR: boot partition not found!"
show_splash /splash-noboot.ppm.gz
loop_forever
fi
echo "Mount boot partition ($partition)"
mount -r "$partition" /boot
}
# $1: initramfs-extra path
extract_initramfs_extra() {
initramfs_extra="$1"
if [ ! -e "$initramfs_extra" ]; then
echo "ERROR: initramfs-extra not found!"
show_splash /splash-noinitramfsextra.ppm.gz
loop_forever
fi
echo "Extract $initramfs_extra"
gzip -d -c "$initramfs_extra" | cpio -i
}
wait_root_partition() {
while [ -z "$(find_root_partition)" ]; do
show_splash /splash-nosystem.ppm.gz
echo "Could not find the root partition."
echo "Maybe you need to insert the sdcard, if your device has"
echo "any? Trying again in one second..."
sleep 1
done
}
resize_root_partition() {
partition=$(find_root_partition)
# Only resize the partition if it's inside the device-mapper, which means
# that the partition is stored as a subpartition inside another one.
# In this case we want to resize it to use all the unused space of the
# external partition.
if [ -z "${partition##"/dev/mapper/"*}" ]; then
# Get physical device
partition_dev=$(dmsetup deps -o devname "$partition" | \
awk -F "[()]" '{print "/dev/"$2}')
# Check if there is unallocated space at the end of the device
if parted -s "$partition_dev" print free | tail -n2 | \
head -n1 | grep -qi "free space"; then
echo "Resize root partition ($partition)"
# unmount subpartition, resize and remount it
kpartx -d "$partition"
parted -s "$partition_dev" resizepart 2 100%
kpartx -afs "$partition_dev"
fi
fi
# Detect and resize root partition on QEMU
if [ -z "${partition##"/dev/hda"*}" ]; then
echo "Resize root partition ($partition)"
parted -s /dev/hda resizepart 2 100%
partprobe
fi
}
unlock_root_partition() {
partition="$(find_root_partition)"
if cryptsetup isLuks "$partition"; then
until cryptsetup status root | grep -qwi active; do
start_usb_unlock
cryptsetup luksOpen "$partition" root || continue
done
# Show again the loading splashscreen
show_splash /splash-loading.ppm.gz
fi
}
resize_root_filesystem() {
partition="$(find_root_partition)"
touch /etc/mtab # see https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=673323
echo "Check/repair root filesystem ($partition)"
e2fsck -f -y "$partition"
echo "Resize root filesystem ($partition)"
resize2fs -f "$partition"
}
mount_root_partition() {
partition="$(find_root_partition)"
echo "Mount root partition ($partition)"
mount -t ext4 -o ro "$partition" /sysroot
if ! [ -e /sysroot/usr ]; then
echo "ERROR: unable to mount root partition!"
show_splash /splash-mounterror.ppm.gz
loop_forever
fi
}
setup_usb_network_android() {
# Only run, when we have the android usb driver
SYS=/sys/class/android_usb/android0
[ -e "$SYS" ] || return
# Do the setup
printf "%s" "0" >"$SYS/enable"
printf "%s" "18D1" >"$SYS/idVendor"
printf "%s" "D001" >"$SYS/idProduct"
printf "%s" "rndis" >"$SYS/functions"
printf "%s" "1" >"$SYS/enable"
}
setup_usb_network_configfs() {
CONFIGFS=/config/usb_gadget
[ -e "$CONFIGFS" ] || return
mkdir $CONFIGFS/g1
printf "%s" "18D1" >"$CONFIGFS/g1/idVendor"
printf "%s" "D001" >"$CONFIGFS/g1/idProduct"
mkdir $CONFIGFS/g1/strings/0x409
mkdir $CONFIGFS/g1/functions/rndis.usb0
mkdir $CONFIGFS/g1/configs/c.1
mkdir $CONFIGFS/g1/configs/c.1/strings/0x409
printf "%s" "rndis" > $CONFIGFS/g1/configs/c.1/strings/0x409/configuration
ln -s $CONFIGFS/g1/functions/rndis.usb0 $CONFIGFS/g1/configs/c.1
# See also: #338
# shellcheck disable=SC2005
echo "$(ls /sys/class/udc)" > $CONFIGFS/g1/UDC
}
setup_usb_network() {
# Only run once
_marker="/tmp/_setup_usb_network"
[ -e "$_marker" ] && return
touch "$_marker"
echo "Setup usb network"
# Run all usb network setup functions (add more below!)
setup_usb_network_android
setup_usb_network_configfs
}
start_udhcpd() {
# Only run once
[ -e /etc/udhcpd.conf ] && return
# Get usb interface
INTERFACE=""
ifconfig rndis0 "$IP" && INTERFACE=rndis0
if [ -z $INTERFACE ]; then
ifconfig usb0 "$IP" && INTERFACE=usb0
fi
# Create /etc/udhcpd.conf
{
echo "start 172.16.42.2"
echo "end 172.16.42.2"
echo "auto_time 0"
echo "decline_time 0"
echo "conflict_time 0"
echo "lease_file /var/udhcpd.leases"
echo "interface $INTERFACE"
echo "option subnet 255.255.255.0"
} >/etc/udhcpd.conf
echo "Start the dhcpcd daemon (forks into background)"
udhcpd
}
start_usb_unlock() {
# Only run once
_marker="/tmp/_start_usb_unlock"
[ -e "$_marker" ] && return
touch "$_marker"
# Set up networking
setup_usb_network
start_udhcpd
# Telnet splash
show_splash /splash-telnet.ppm.gz
echo "Start the telnet daemon (unlock encrypted partition)"
{
echo '#!/bin/sh'
echo '. /init_functions.sh'
echo 'unlock_root_partition'
echo 'echo_connect_ssh_message'
echo 'killall cryptsetup'
echo "pkill -f telnetd.*:${TELNET_PORT}"
} >/telnet_connect.sh
chmod +x /telnet_connect.sh
telnetd -b "${IP}:${TELNET_PORT}" -l /telnet_connect.sh
}
# $1: path to ppm.gz file
show_splash() {
gzip -c -d "$1" >/tmp/splash.ppm
fbsplash -s /tmp/splash.ppm
}
echo_connect_ssh_message() {
echo "Your root partition has been decrypted successfully!"
echo "You can connect to your device using SSH in a few seconds:"
echo "ssh user@$IP"
}
start_msm_refresher() {
# shellcheck disable=SC2154,SC2086
if [ "${deviceinfo_msm_refresher}" = "true" ]; then
/usr/sbin/msm-fb-refresher --loop &
fi
}
set_framebuffer_mode() {
[ -e "/sys/class/graphics/fb0/modes" ] || return
[ -z "$(cat /sys/class/graphics/fb0/mode)" ] || return
_mode="$(cat /sys/class/graphics/fb0/modes)"
echo "Setting framebuffer mode to: $_mode"
echo "$_mode" > /sys/class/graphics/fb0/mode
}
loop_forever() {
while true; do
sleep 1
done
}