pmaports/temp/u-boot-librem5/update-u-boot
Clayton Craft ec9a4e863a
temp/u-boot-librem5: enable efidebug, enable auto update (MR 2842)
This enables an auto-update mechanism on post-upgrade for the u-boot
firmware on the librem 5 and librem 5 devkit. This mechanism is largely
copied from the implementation in the pinephone u-boot package.

efidebug is useful for booting the kernel via EFI mode in u-boot.
2022-01-16 16:57:08 +01:00

147 lines
3.2 KiB
Bash

#!/bin/sh
board=
device=
dryrun=
imagedir=
get_boot_blockdev() {
# Find the blockdevice where /boot is mounted from
mount | sed -n -E 's:.*(/dev/mmcblk[0-9])p[0-9] on /boot .*:\1:p'
}
get_defaults() {
if [ -z "$board" ] && [ -e /sys/firmware/devicetree/base/compatible ]; then
case "$(cat /sys/firmware/devicetree/base/compatible 2>/dev/null)" in
purism,librem5r*) board=librem5;;
purism,librem5-devkit*) board=librem5-devkit;;
esac
fi
if [ -z "$device" ]; then
case "$board" in
librem5*) device=/dev/mmcblk0 ;;
esac
fi
if [ -z "$imagedir" ]; then
imagedir="/usr/share/u-boot"
fi
}
die() {
echo "ERROR: $@"
exit 1
}
usage() {
get_defaults
cat <<EOF
usage: $0 [-n,--dry-run] [-i,--imagedir <imagedir>] [-b|--board <board-type>] [-d|--device <device>] [-s|--skip-delay]
options:
-b,--board <board> Specify the board type: librem5
(current default: ${board:-none})
-d,--device <device> Specify the device where to install u-boot
(current default: ${device:-none})
-i,--imagedir <imagedir> Specify u-boot image directory
(current default: ${imagedir:-none})
-n,--dry-run Print commands but don't execute them
-s,--skip-delay Skip delay and flash the image immediately
EOF
}
validate_checksum() {
file="$1"
file_sha512="$file.sha512"
file_size=$(stat -c%s $file)
device="$2"
bs="$3"
seek="$4"
checksum0=$(cat $file_sha512 | awk {'print $1'})
checksum1=$(dd if=$device bs=1 skip=$(($seek * $bs)) count=$file_size status=none | sha512sum | awk {'print $1'})
if [ "$checksum0" != "$checksum1" ]; then
echo "File: $checksum0"
echo "Part: $checksum1"
die "Checksum failed"
fi
echo "Successful U-Boot image checksum verification on $device :"
echo -e "\t$checksum1"
}
while [ $# -gt 0 ]; do
opt="$1"
shift
case "$opt" in
-b|--board)
case "$1" in
librem5) board="librem5" ;;
*) usage; exit 1;;
esac
shift
;;
-d|--device)
device="$1"
shift
;;
-i|--imagedir)
imagedir="$1"
shift
;;
-n|--dry-run)
dryrun="echo"
;;
-s|--skip-delay)
skip_delay="yes"
;;
--)
break
;;
-*)
usage
exit 1
;;
esac
done
get_defaults
if [ -z "$board" -o -z "$device" -o -z "$imagedir" -o ! -e "$imagedir" ]; then
usage
exit 1
fi
if [ -z "$dryrun" ]; then
if [ -z "$skip_delay" ]; then
echo "Updating $board u-boot in $device in 3 seconds..."
sleep 3
else
echo "Updating $board u-boot in $device"
fi
fi
(
set -e
case "$board" in
librem5)
[ -e "$imagedir/librem5" ] || die "librem5 images not installed, apk add u-boot-librem5"
$dryrun dd if=$imagedir/librem5/phone-boot.img of=$device bs=1024 seek=2 oflag=direct status=none
[ -z "$dryrun" ] && validate_checksum $imagedir/librem5/phone-boot.img $device 1024 2
;;
librem5-devkit)
[ -e "$imagedir/librem5" ] || die "librem5-devkit images not installed, apk add u-boot-librem5-devkit"
$dryrun dd if=$imagedir/librem5/devkit-boot.img of=$device bs=1024 seek=2 oflag=direct status=none
[ -z "$dryrun" ] && validate_checksum $imagedir/librem5/devkit-boot.img $device 1024 2
;;
esac
$dryrun sync
) || die "U-Boot installation in $device failed"
[ -z "$dryrun" ] && echo "Completed successfully."