f4f6c02ed1
- 0003-dts-pinetab-add-missing-bma223-ohci1.patch
The original patch added a node for BMA223 and a node for ohci1.
The former is already present in upstream, so the new patch
0003-dts-pinetab-add-missing-ohci1.patch only adds the latter.
- 0004-arm64-dts-allwinner-Add-bluetooth-node-to-the-PineTa.patch
The patch is now present in upstream so it has been removed.
However it's worth noting that upstream's node has the wake GPIOs
reversed from the original patch. The original patch added:
device-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
host-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */
... while upstream has:
device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */
This has not been tested on a PineTab.
- 0005-dts-pinetab-make-audio-routing-consistent-with-pinep.patch
The first hunk of the patch is in upstream and has been removed.
- 0013-Revert-usb-quirks-Add-USB_QUIRK_RESET-for-Quectel-EG25G-Modem.patch
This patch reverted upstream commit that was present until v6.7
( f9e3e7ea4e )
but is not present in v6.8+, so the patch has been removed.
- 0014-usb-serial-option-add-reset-resume-callback-for-WWAN.patch
The patch is now present in upstream so it has been removed.
- 0016-Define-orientation-and-rotation-for-PinePhone-camera.patch
The patch is now present in upstream so it has been removed.
---
The issues found with the previous upgrade to 6.8.4
( 646e0b50df ), ie reliably receiving calls
in suspend ( #2734 ) and the headset / headphones detection being broken
because of the jack detection changes ( #2738 ) have been fixed.
[ci:skip-build]: already built successfully in CI
38 lines
1.3 KiB
Diff
38 lines
1.3 KiB
Diff
From 125b782564a7dac6e6d1137e8103e2613b12600e Mon Sep 17 00:00:00 2001
|
|
From: Jernej Skrabec <jernej.skrabec@siol.net>
|
|
Date: Sat, 24 Aug 2019 01:36:44 +0200
|
|
Subject: [PATCH] eMMC workaround
|
|
|
|
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
|
|
---
|
|
drivers/mmc/host/sunxi-mmc.c | 8 +++++---
|
|
1 file changed, 5 insertions(+), 3 deletions(-)
|
|
|
|
diff --git a/drivers/mmc/host/sunxi-mmc.c b/drivers/mmc/host/sunxi-mmc.c
|
|
index e9370c736497..a4abd589e95d 100644
|
|
--- a/drivers/mmc/host/sunxi-mmc.c
|
|
+++ b/drivers/mmc/host/sunxi-mmc.c
|
|
@@ -1436,15 +1436,17 @@ static int sunxi_mmc_probe(struct platform_device *pdev)
|
|
MMC_CAP_SDIO_IRQ;
|
|
|
|
/*
|
|
- * Some H5 devices do not have signal traces precise enough to
|
|
- * use HS DDR mode for their eMMC chips.
|
|
+ * Some H5 and H6 devices do not have signal traces precise
|
|
+ * enough to use HS DDR mode for their eMMC chips.
|
|
*
|
|
* We still enable HS DDR modes for all the other controller
|
|
* variants that support them.
|
|
*/
|
|
if ((host->cfg->clk_delays || host->use_new_timings) &&
|
|
!of_device_is_compatible(pdev->dev.of_node,
|
|
- "allwinner,sun50i-h5-emmc"))
|
|
+ "allwinner,sun50i-h5-emmc") &&
|
|
+ !of_device_is_compatible(pdev->dev.of_node,
|
|
+ "allwinner,sun50i-h6-emmc"))
|
|
mmc->caps |= MMC_CAP_1_8V_DDR | MMC_CAP_3_3V_DDR;
|
|
|
|
ret = mmc_of_parse(mmc);
|
|
--
|
|
2.45.0
|
|
|