forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/testing/linux-motorola-panelli/cust.dtsi
Oliver Smith fa292406df
linux-motorola-panelli: store full kernel config (MR 3883) 
Store the full kernel config instead of a fragment, so
"pmbootstrap kconfig check" can properly verify that all required kernel
options are there. Without this, it would fail an upcoming check for
BINFMT_ELF and BINFMT_SCRIPT:
https://lists.sr.ht/~postmarketos/pmbootstrap-devel/patches/38508

With the full config, pmbootstrap found that ANDROID_PARANOID_NETWORK
was enabled while it should be disabled, so disable it.

Fix the mediatek drvgen related build failure with
00_disable_drvgen.patch from linux-wiko-ufeel and including cust.dtsi:
https://wiki.postmarketos.org/wiki/Porting_to_a_new_device#Removing_python2_dependency

[ci:skip-build]: already built successfully in CI
2023-02-19 20:44:50 +01:00

312 lines
6.5 KiB
Text
Raw Blame History

/*
* Generated by MTK SP Drv_CodeGen Version 03.13.6 for MT6735M. Copyright MediaTek Inc. (C) 2013.
* Sun Feb 19 13:59:47 2023
* Do Not Modify the File.
*/
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
/*************************
* EINT DTSI File
*************************/
&nfc {
interrupt-parent = <&eintc>;
interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
debounce = <2 0>;
status = "okay";
};
&msdc1_ins {
interrupt-parent = <&eintc>;
interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
debounce = <5 1000>;
status = "okay";
};
&accdet {
interrupt-parent = <&eintc>;
interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
debounce = <6 256000>;
status = "okay";
};
&touch {
interrupt-parent = <&eintc>;
interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
debounce = <10 0>;
status = "okay";
};
&als {
interrupt-parent = <&eintc>;
interrupts = <65 IRQ_TYPE_LEVEL_LOW>;
debounce = <65 0>;
status = "okay";
};
&gse_1 {
interrupt-parent = <&eintc>;
interrupts = <66 IRQ_TYPE_LEVEL_LOW>;
debounce = <66 0>;
status = "okay";
};
&gyro {
interrupt-parent = <&eintc>;
interrupts = <67 IRQ_TYPE_LEVEL_LOW>;
debounce = <67 0>;
status = "okay";
};
&ext_buck_oc {
interrupt-parent = <&eintc>;
interrupts = <78 IRQ_TYPE_LEVEL_HIGH>;
debounce = <78 0>;
status = "okay";
};
/********************
* GPIO USAGE MAPPING DTSI File
****************/
&gpio_usage_mapping {
GPIO_SIM1_HOT_PLUG = <8>;
GPIO_SIM2_HOT_PLUG = <9>;
GPIO_CMDAT1 = <43>;
GPIO_SIM2_SCLK = <160>;
GPIO_SIM2_SRST = <161>;
GPIO_SIM2_SIO = <162>;
GPIO_SIM1_SCLK = <163>;
GPIO_SIM1_SRST = <164>;
GPIO_SIM1_SIO = <165>;
};
&eintc {
MD1_SIM1_HOT_PLUG_EINT@0 {
compatible = "mediatek,MD1_SIM1_HOT_PLUG_EINT-eint";
interrupts = <0 4>;
debounce = <0 100000>;
dedicated = <0 0>;
src_pin = <0 1>;
sockettype=<0 0>;
status = "okay";
};
MD1_SIM2_HOT_PLUG_EINT@1 {
compatible = "mediatek,MD1_SIM2_HOT_PLUG_EINT-eint";
interrupts = <1 4>;
debounce = <1 100000>;
dedicated = <1 0>;
src_pin = <1 2>;
sockettype=<1 0>;
status = "okay";
};
};
/*************************
* PMIC DTSI File
*************************/
&mt_pmic_vcama_ldo_reg {
regulator-name = "vcama";
regulator-default-on = <0>; /* 0:skip, 1: off, 2:on */
status = "okay";
};
&mt_pmic_vsim1_ldo_reg {
regulator-name = "vsim1";
regulator-default-on = <0>; /* 0:skip, 1: off, 2:on */
status = "okay";
};
&mt_pmic_vsim2_ldo_reg {
regulator-name = "vsim2";
regulator-default-on = <0>; /* 0:skip, 1: off, 2:on */
status = "okay";
};
&mt_pmic_vcam_af_ldo_reg {
regulator-name = "vcamaf";
regulator-default-on = <0>; /* 0:skip, 1: off, 2:on */
status = "okay";
};
&mt_pmic_vgp1_ldo_reg {
regulator-name = "vgp1";
regulator-default-on = <0>; /* 0:skip, 1: off, 2:on */
status = "okay";
};
&mt_pmic_vibr_ldo_reg {
regulator-name = "vibr";
regulator-default-on = <0>; /* 0:skip, 1: off, 2:on */
status = "okay";
};
&mt_pmic_vcamd_ldo_reg {
regulator-name = "vcamd";
regulator-default-on = <0>; /* 0:skip, 1: off, 2:on */
status = "okay";
};
&mt_pmic_vcam_io_ldo_reg {
regulator-name = "vcamio";
regulator-default-on = <0>; /* 0:skip, 1: off, 2:on */
status = "okay";
};
&kd_camera_hw1 {
vcama-supply = <&mt_pmic_vcama_ldo_reg>;
vcama_main2-supply = <&mt_pmic_vcama_ldo_reg>;
vcama_sub-supply = <&mt_pmic_vcama_ldo_reg>;
vcamaf-supply = <&mt_pmic_vcam_af_ldo_reg>;
vcamaf_main2-supply = <&mt_pmic_vcam_af_ldo_reg>;
vcamaf_sub-supply = <&mt_pmic_vcam_af_ldo_reg>;
vcamd-supply = <&mt_pmic_vcamd_ldo_reg>;
vcamd_main2-supply = <&mt_pmic_vcamd_ldo_reg>;
vcamd_sub-supply = <&mt_pmic_vcamd_ldo_reg>;
vcamio-supply = <&mt_pmic_vcam_io_ldo_reg>;
vcamio_main2-supply = <&mt_pmic_vcam_io_ldo_reg>;
vcamio_sub-supply = <&mt_pmic_vcam_io_ldo_reg>;
status = "okay";
};
&touch {
vtouch-supply = <&mt_pmic_vgp1_ldo_reg>;
status = "okay";
};
/********************************************
*ADC DTSI File
********************************************/
&auxadc {
adc_channel@ {
compatible = "mediatek,adc_channel";
mediatek,temperature0 = <0>;
mediatek,temperature1 = <1>;
mediatek,adc_fdd_rf_params_dynamic_custom_ch = <12>;
status = "okay";
};
};
/**********************************************
*CLK_BUF DTSI File
********************************************/
&rf_clock_buffer_ctrl {
mediatek,clkbuf-quantity = <4>;
mediatek,clkbuf-config = <2 2 2 2>;
status = "okay";
};
/**********************************************
*Keypad DTSI File
********************************************/
&keypad{
mediatek,kpd-key-debounce = <1024>;
mediatek,kpd-sw-pwrkey = <116>;
mediatek,kpd-hw-pwrkey = <8>;
mediatek,kpd-sw-rstkey = <115>;
mediatek,kpd-hw-rstkey = <17>;
mediatek,kpd-use-extend-type = <0>;
/*HW Keycode [0~71] -> Linux Keycode*/
mediatek,kpd-hw-map-num = <72>;
mediatek,kpd-hw-init-map = <114 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 >;
mediatek,kpd-pwrkey-eint-gpio = <0>;
mediatek,kpd-pwkey-gpio-din = <0>;
mediatek,kpd-hw-dl-key0 = <17>;
mediatek,kpd-hw-dl-key1 = <0>;
mediatek,kpd-hw-dl-key2 = <8>;
mediatek,kpd-hw-recovery-key = <17>;
mediatek,kpd-hw-factory-key = <0>;
status = "okay";
};
/*************************
* I2C DTSI File
*************************/
&i2c0 {
#address-cells = <1>;
#size-cells = <0>;
camera_main@10 {
compatible = "mediatek,camera_main";
reg = <0x10>;
status = "okay";
};
camera_main_af@0c {
compatible = "mediatek,camera_main_af";
reg = <0x0c>;
status = "okay";
};
camera_sub@3c {
compatible = "mediatek,camera_sub";
reg = <0x3c>;
status = "okay";
};
};
&i2c1 {
#address-cells = <1>;
#size-cells = <0>;
cap_touch@5d {
compatible = "mediatek,cap_touch";
reg = <0x5d>;
status = "okay";
};
i2c_lcd_bias@3e {
compatible = "mediatek,i2c_lcd_bias";
reg = <0x3e>;
status = "okay";
};
};
&i2c2 {
#address-cells = <1>;
#size-cells = <0>;
msensor@0d {
compatible = "mediatek,msensor";
reg = <0x0d>;
status = "okay";
};
gyro@68 {
compatible = "mediatek,gyro";
reg = <0x68>;
status = "okay";
};
gsensor@0e {
compatible = "mediatek,gsensor";
reg = <0x0e>;
status = "okay";
};
alsps@60 {
compatible = "mediatek,alsps";
reg = <0x60>;
status = "okay";
};
nfc@28 {
compatible = "mediatek,nfc";
reg = <0x28>;
status = "okay";
};
strobe_main@63 {
compatible = "mediatek,strobe_main";
reg = <0x63>;
status = "okay";
};
};
&i2c3 {
#address-cells = <1>;
#size-cells = <0>;
ext_buck@6b {
compatible = "mediatek,ext_buck";
reg = <0x6b>;
status = "okay";
};
};
Reference in a new issue View git blame Copy permalink