pmaports/device/linux-samsung-i9070/APKBUILD
drebrez a88c8c918c Fix #808: Add SYSVIPC kernel config check (#809)
* Add SYSVIPC kernel config check
* Add SYSVIPC kernel config option to all linux-device packages
2017-10-23 19:25:40 +00:00

149 lines
5.4 KiB
Text

# APKBUILD based on linux-vanilla aport. Changes:
# - add findutils makedepend (necessary for the initramfs)
# - it builds an initramfs - do not use ramdisk.cpio and
# ramdisk-recovery.cpio, in there, always use the
# initramfs from the kernel2 partition ("isorec")
# - directly boot to that initramfs, not only when the recovery
# key combination was pressed.
# - use Alpine's busybox-static instead of the pre-compiled
# binary, that comes with the source
# - reduce lzo compression because Alpine's busybox doesn't
# support high compression
# - add kernel modules installation
# - add wifi firmware from vendor files
#
# Kernel config changes, based on: arch/arm/configs/janice_defconfig
# - enable devtmpfs (needed for udev -> touch support in weston)
# - disable ANDROID_PARANOID_NETWORK (removes network restrictions)
_vendor=samsung
_flavor=samsung-i9070
_hash="ac7219c4b8dcec7bc5a598d42c6be0db4aa36332"
_config="config-${_flavor}.armhf"
pkgname=linux-${_flavor}
pkgver=3.0.101
case $pkgver in
*.*.*) _kernver=${pkgver%.*};;
*.*) _kernver=$pkgver;;
esac
pkgrel=9
arch="armhf"
pkgdesc="Samsung Galaxy S Advance kernel from Epirex"
url="https://github.com/Epirex/Samsung_STE_Kernel"
depends="postmarketos-mkinitfs"
makedepends="perl sed installkernel bash gmp-dev bc linux-headers elfutils-dev busybox-static-armhf"
options="!strip !check !tracedeps"
install=
source="
$pkgname-$_hash.tar.gz::https://github.com/Epirex/Samsung_STE_Kernel/archive/${_hash}.tar.gz
$_config
00_fix_return_address.patch
01_remove_ramdisks_from_initramfs.patch
02_reduce_lzo_compression.patch
03_change_modules_install_dir.patch
04_change_dhd_firmware_dir.patch
compiler-gcc6.h
init
"
subpackages=""
license="GPL2"
_abi_release=${pkgver}
_carch="arm"
HOSTCC="${CC:-gcc}"
HOSTCC="${HOSTCC#${CROSS_COMPILE}}"
ksrcdir="$srcdir/Samsung_STE_Kernel-${_hash}"
prepare() {
local _patch_failed=
cd "$ksrcdir"
# first apply patches in specified order
for i in $source; do
case $i in
*.patch)
msg "Applying $i..."
if ! patch -s -p1 -N -i "$srcdir"/$i; then
echo $i >>failed
_patch_failed=1
fi
;;
esac
done
if ! [ -z "$_patch_failed" ]; then
error "The following patches failed:"
cat failed
return 1
fi
# Use Alpine's busybox.static instead of the pre-compiled busybox shipped
# with the source
cp -v /usr/$(arch_to_hostspec $arch)/bin/busybox.static \
"$ksrcdir"/usr/u8500_initramfs_files/busybox
# use custom init script in the initramfs which loads the initramfs from
# the kernel2 partition ("isorec")
cp -v "$srcdir"/init "$ksrcdir"/usr/u8500_initramfs_files/init
# gcc6 support
cp -v "$srcdir/compiler-gcc6.h" "$ksrcdir/include/linux/"
mkdir -p "$srcdir"/build
cp "$srcdir"/$_config "$srcdir"/build/.config
make -C "$ksrcdir" O="$srcdir"/build ARCH="$_carch" HOSTCC="$HOSTCC" \
silentoldconfig
}
# this is so we can do: 'abuild menuconfig' to reconfigure kernel
menuconfig() {
cd "$srcdir"/build
echo "--[ menuconfig ]--"
make ARCH="$_carch" menuconfig
cp .config "$startdir"/$_config
}
build() {
cd "$srcdir"/build
unset LDFLAGS
echo "--[ Build kernel ]--"
make ARCH="$_carch" CC="${CC:-gcc}" \
KBUILD_BUILD_VERSION="$((pkgrel + 1))-Alpine"
echo "--[ Build modules ]--"
# the 'no-pic' flag is necessary to avoid the
# error 'Unknown symbol _GLOBAL_OFFSET_TABLE_ (err 0)' when loading the module
make ARCH="$_carch" CC="${CC:-gcc}" CFLAGS_MODULE="-fno-pic" \
KBUILD_BUILD_VERSION="$((pkgrel + 1))-Alpine" CONFIG_NO_ERROR_ON_MISMATCH=y \
modules
}
package() {
echo "--[ Installing kernel ]--"
install -Dm644 "$srcdir/build/arch/arm/boot/zImage" \
"$pkgdir/boot/vmlinuz-$_flavor"
install -D "$srcdir/build/include/config/kernel.release" \
"$pkgdir/usr/share/kernel/$_flavor/kernel.release"
cd "$srcdir"/build
unset LDFLAGS
echo "--[ Installing modules ]--"
make ARCH="$_carch" CC="${CC:-gcc}" \
KBUILD_BUILD_VERSION="$((pkgrel + 1))-Alpine" CONFIG_NO_ERROR_ON_MISMATCH=y \
INSTALL_MOD_PATH="$pkgdir" INSTALL_MOD_STRIP=1 modules_install
}
sha512sums="bb8218d803ec27f983449a43d14df75122311609a39e5b57095f4e8933752a2699fa0d4df1674aeee7d6e3a439551dacc9af3cab26b6e3e71f0441a4f16693df linux-samsung-i9070-ac7219c4b8dcec7bc5a598d42c6be0db4aa36332.tar.gz
84dab76407f10e1bc9072a53596a38d96acb129c67fbb8f8fe1c737e165ccaba283b1a20830c0ed6ec7a3183a85ccfee5f2918f99567f3bba8b3ffc01fc228e1 config-samsung-i9070.armhf
ea1d3b5a234fa565e3c1a792de48f4fc4e6023d281d303c8e319c7ef28edc5739ab0e4dea0139a41f0a5c7d03e27921ccaa214fd0ac5c72245a094ce60128864 00_fix_return_address.patch
c8f12ecf578be0c4600563134079b980a1079b08ac868302af8821022befe873aa94c67b9690ba87f5967f0a48939d15e871dc2d2862bed7b6a1d0c9a95cfd8f 01_remove_ramdisks_from_initramfs.patch
ef5b912c26fea4ab882592bdf7487942c64b123de8d25d08d976f29743f311742ee2f773bf2d110ddb5095f254dbb0bd4487c5cfce77311929082599199e7ebd 02_reduce_lzo_compression.patch
27bba6d070db6f499d030680c020906fc3238dc60d90a9b2f0f3a355ef15beb227c1cf48b7858156264fe10f7943772ed00a837be36ba4b80de8199f0383e688 03_change_modules_install_dir.patch
47533412cc91d2ead046039c90180ebc459e157017be85dca69cd882a183963448beb973f2cb7eaccbcd35354b0ed6a668131cd39ea30393dd52fd93b7e26815 04_change_dhd_firmware_dir.patch
d80980e9474c82ba0ef1a6903b434d8bd1b092c40367ba543e72d2c119301c8b2d05265740e4104ca1ac5d15f6c4aa49e8776cb44264a9a28dc551e0d1850dcc compiler-gcc6.h
ef01c51c138239a49c1d00ae0074a07fed267d64934cf3d436a8ff057b91692ee2d040a45eacbb0dc62d5017a708c4dca2fadc282c850fa72aeebcfa787e2cbc init"