forge/pmaports
1
0
Fork 0
Code Issues 2 Pull requests Projects Releases Packages Wiki Activity Actions
pmaports/device/testing/u-boot-starqltechn/0002-board-starqltechn-get-board-usable-add-bootcmd-and-d.patch

257 lines
7.5 KiB
Diff
Raw Blame History

From 9dc363f0968cd74223cace7806fb88a938d897b2 Mon Sep 17 00:00:00 2001
From: Dzmitry Sankouski <dsankouski@gmail.com>
Date: Wed, 26 Jan 2022 14:34:33 +0300
Subject: [PATCH 2/3 v4] board: starqltechn: get board usable - add bootcmd and
docs
U-boot is intended to replace linux kernel in android boot image(ABL), and
it's FIT payload to replace initramfs file. The boot process is similar to
boot image with linux:
- android bootloader (ABL) unpacks android boot image
- ABL sets `linux,initrd-start property` in chosen node in unpacked FDT
- ABL sets x0 register to FDT address, and passes control to u-boot
- u-boot reads x0 register, and stores it in `prevbl_fdt_addr` env variable
- u-boot reads `linux,initrd-start` property,
and stores it in `prevbl_initrd_start_addr`
In this way, u-boot bootcmd relies on `prevbl_initrd_start_addr` env
variable, and boils down to `bootm $prevbl_initrd_start_addr`.
If more control on boot process is desired, pack a boot script in
FIT image, and put it to default configuration
What done:
- strip unneeded config options
- add FIT image support
- add framebuffer node, u-boot logo and video console
- increase LMB_MAX_REGIONS, to store all linux dtb reserved memory regions
- add linux kernel image header
Uart driver causes hang, when u-boot is used in android boot image instead
of linux. Temporary disable console driver, until investigated and fixed.
Signed-off-by: Dzmitry Sankouski <dsankouski@gmail.com>
Cc: Ramon Fried <rfried.dev@gmail.com>
---
Changes for v2:
- change signed off line
- add CONFIG_SAVE_PREV_BL_FDT_ADDR. It's needed to boot
android stock kernel
- change bootcmd to source bootscript from FIT image
for more flexibility
Changes for v3:
- enable simple framebuffer
- enable video console
- add preboot variable
- remove 0x prefix in name in device tree
Changes for v4:
- fix uart driver pinmux
- remove serial from stdout and stderr env
- disable serial driver, because it's crashes autoboot
arch/arm/dts/sdm845.dtsi | 6 ++--
arch/arm/dts/starqltechn-uboot.dtsi | 9 ++++--
arch/arm/dts/starqltechn.dts | 13 ++++++--
configs/starqltechn_defconfig | 21 ++++++++++---
doc/board/qualcomm/sdm845.rst | 47 ++++++++++++++++++++++++++++-
include/configs/sdm845.h | 8 +++++
6 files changed, 90 insertions(+), 14 deletions(-)
diff --git a/arch/arm/dts/sdm845.dtsi b/arch/arm/dts/sdm845.dtsi
index 1185b71216..6f2fb20d68 100644
--- a/arch/arm/dts/sdm845.dtsi
+++ b/arch/arm/dts/sdm845.dtsi
@@ -48,10 +48,8 @@
/* DEBUG UART */
qup_uart9: qup-uart9-default {
- pinmux {
- pins = "GPIO_4", "GPIO_5";
- function = "qup9";
- };
+ pins = "GPIO_4", "GPIO_5";
+ function = "gpio";
};
};
diff --git a/arch/arm/dts/starqltechn-uboot.dtsi b/arch/arm/dts/starqltechn-uboot.dtsi
index d8d75e018a..b55cccfe14 100644
--- a/arch/arm/dts/starqltechn-uboot.dtsi
+++ b/arch/arm/dts/starqltechn-uboot.dtsi
@@ -8,15 +8,18 @@
/
{
+ framebuffer@9D400000 {
+ u-boot,dm-pre-reloc;
+ };
soc {
u-boot,dm-pre-reloc;
+ serial@a84000 {
+ u-boot,dm-pre-reloc;
+ };
gcc {
clock-controller@100000 {
u-boot,dm-pre-reloc;
};
- serial@0xa84000 {
- u-boot,dm-pre-reloc;
- };
gpio_north@3900000 {
u-boot,dm-pre-reloc;
};
diff --git a/arch/arm/dts/starqltechn.dts b/arch/arm/dts/starqltechn.dts
index 387420f30b..0261388319 100644
--- a/arch/arm/dts/starqltechn.dts
+++ b/arch/arm/dts/starqltechn.dts
@@ -34,9 +34,18 @@
method = "smc";
};
+ framebuffer: framebuffer@9D400000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x9D400000 0 (2960 * 1440 * 4)>;//2400000
+ width = <1440>;
+ height = <2960>;
+ stride = <(1440 * 4)>;
+ format = "a8r8g8b8";
+ };
+
soc: soc {
- serial@0xa84000 {
- status = "ok";
+ serial@a84000 {
+ status = "okay";
};
pinctrl@3900000 {
diff --git a/configs/starqltechn_defconfig b/configs/starqltechn_defconfig
index f57bb859cc..75e8409c4d 100644
--- a/configs/starqltechn_defconfig
+++ b/configs/starqltechn_defconfig
@@ -2,16 +2,18 @@ CONFIG_ARM=y
CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_POSITION_INDEPENDENT=y
CONFIG_ARCH_SNAPDRAGON=y
-CONFIG_SYS_TEXT_BASE=0x80000000
-CONFIG_SYS_MALLOC_LEN=0x81f000
CONFIG_DEFAULT_DEVICE_TREE="starqltechn"
+CONFIG_BOOTDELAY=0
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
CONFIG_TARGET_STARQLTECHN=y
CONFIG_IDENT_STRING="\nSamsung S9 SM-G9600"
CONFIG_SYS_LOAD_ADDR=0x80000000
-CONFIG_USE_PREBOOT=y
+CONFIG_LMB_MAX_REGIONS=64
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_HUSH_PARSER=y
CONFIG_CMD_GPIO=y
+# CONFIG_REQUIRE_SERIAL_CONSOLE is not set
# CONFIG_NET is not set
# CONFIG_DM_STDIO is not set
CONFIG_CLK=y
@@ -20,5 +22,16 @@ CONFIG_PM8916_GPIO=y
CONFIG_PINCTRL=y
CONFIG_DM_PMIC=y
CONFIG_PMIC_PM8916=y
-CONFIG_MSM_GENI_SERIAL=y
+# CONFIG_MSM_GENI_SERIAL is not set
CONFIG_SPMI_MSM=y
+CONFIG_LINUX_KERNEL_IMAGE_HEADER=y
+CONFIG_SAVE_PREV_BL_INITRAMFS_START_ADDR=y
+CONFIG_SAVE_PREV_BL_FDT_ADDR=y
+CONFIG_DM_VIDEO=y
+CONFIG_VIDEO_LOGO=y
+CONFIG_CMD_VIDCONSOLE=y
+CONFIG_CONSOLE_NORMAL=y
+CONFIG_SYS_WHITE_ON_BLACK=y
+CONFIG_VIDEO_DT_SIMPLEFB=y
+CONFIG_VIDEO_SIMPLE=y
+CONFIG_CMD_BMP=y
diff --git a/doc/board/qualcomm/sdm845.rst b/doc/board/qualcomm/sdm845.rst
index cd46cbe9cf..b00a30a313 100644
--- a/doc/board/qualcomm/sdm845.rst
+++ b/doc/board/qualcomm/sdm845.rst
@@ -17,7 +17,9 @@ It is loaded as an Android boot image through ABL
Installation
------------
-First, setup ``CROSS_COMPILE`` for aarch64. Then, build U-Boot for your board::
+Build
+^^^^^^^^^^^^^^^^^^^^^^^^
+Setup ``CROSS_COMPILE`` for aarch64 and build U-Boot for your board::
$ export CROSS_COMPILE=<aarch64 toolchain prefix>
$ make <your board name here, see Boards section>_defconfig
@@ -25,6 +27,49 @@ First, setup ``CROSS_COMPILE`` for aarch64. Then, build U-Boot for your board::
This will build ``u-boot.bin`` in the configured output directory.
+Generate FIT image
+^^^^^^^^^^^^^^^^^^^^^^^^
+See doc/uImage.FIT for more details
+
+Pack android boot image
+^^^^^^^^^^^^^^^^^^^^^^^^
+We'll assemble android boot image with ``u-boot.bin`` instead of linux kernel,
+and FIT image instead of ``initramfs``. Android bootloader expect gzipped kernel
+with appended dtb, so let's mimic linux to satisfy stock bootloader:
+
+- create dump dtb::
+
+ workdir=/tmp/prepare_payload
+ mkdir -p "$workdir"
+ cd "$workdir"
+ mock_dtb="$workdir"/payload_mock.dtb
+
+ dtc -I dts -O dtb -o "$mock_dtb" << EOF
+ /dts-v1/;
+ / {
+ memory {
+ /* We expect the bootloader to fill in the size */
+ reg = <0 0 0 0>;
+ };
+
+ chosen { };
+ };
+ EOF
+
+- gzip u-boot ``gzip u-boot.bin``
+- append dtb to gzipped u-boot: ``cat u-boot.bin.gz "$mock_dtb" > u-boot.bin.gz-dtb``
+
+Now we've got everything to build android boot image:::
+
+ mkbootimg --base 0x0 --kernel_offset 0x00008000 \
+ --ramdisk_offset 0x02000000 --tags_offset 0x01e00000 \
+ --pagesize 4096 --second_offset 0x00f00000 \
+ --ramdisk "$fit_image" \
+ --kernel u-boot.bin.gz-dtb \
+ -o boot.img
+
+Flash image with your phone's flashing method.
+
Boards
------------
starqlte
diff --git a/include/configs/sdm845.h b/include/configs/sdm845.h
index af9ba197d4..ba57323c74 100644
--- a/include/configs/sdm845.h
+++ b/include/configs/sdm845.h
@@ -16,6 +16,14 @@
/* Generic Timer Definitions */
#define COUNTER_FREQUENCY 19000000
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "bootm_size=0x4000000\0" \
+ "bootm_low=0x80000000\0" \
+ "stdout=vidconsole\0" \
+ "stderr=vidconsole\0" \
+ "preboot=source $prevbl_initrd_start_addr:prebootscript\0" \
+ "bootcmd=source $prevbl_initrd_start_addr:bootscript\0"
+
/* Size of malloc() pool */
#define CONFIG_SYS_BOOTM_LEN SZ_64M
--
2.20.1
Reference in a new issue View git blame Copy permalink