pmaports/temp/u-boot
Oliver Smith 77a57de7ed
Cosmetic: temp/*: fix comments on top of APKBUILD
Remove Alpine's maintainers and contributors from the APKBUILDs in temp
where we still had them. In general, we don't keep them there, because
we don't want them to get e-mailed about questions from the postmarketOS
aports. It is obvious that they were copy pasted from Alpine, with minor
adjustments.

Remove "Remember to increase pkgrel after changing _pkgver!" from
temp/mesa, because we have a CI check for that now.

[ci:skip-build]: cosmetic changes only
2019-06-01 23:32:45 +02:00
..
APKBUILD Cosmetic: temp/*: fix comments on top of APKBUILD 2019-06-01 23:32:45 +02:00
README.txt * Added device package for the pine-a64lts 2018-09-16 18:02:06 +02:00
update-u-boot main: linux-postmarketos-allwinner: PinePhone updates 2019-05-23 14:39:21 +02:00

WandBoard
---------

- ROM loads boot loader from raw MMC sectors at fixed address
- NOTE: 1st partition needs to start after boot loader

- Install u-boot with:
  dd if=wandboard/SPL of=/dev/mmcblk0 bs=1k seek=1
  dd if=wandboard/u-boot.img of=/dev/mmcblk0 bs=1k seek=69
  sync

  (Note - the SD card node may vary, so adjust this as needed).

- Insert the SD card into the slot located in the bottom of the board
  (same side as the mx6 processor)

BeagleBoard
-----------

- ROM looks for 1st partition with FAT, and loads MLO from it
- NOTE: MLO needs to be the first file created on this partition

- Install u-boot with:
  cp am335x_boneblack/{MLO,u-boot.img} /media/mmcblk0p1/

Sunxi (Cubie* etc)
------------------

- ROM loads boot loader from SD-CARD sectors at fixed address
- Install u-boot with:
    sudo dd if=<board>/u-boot-sunxi-with-spl.bin of=/dev/sda bs=1024 seek=8