pmaports/temp/u-boot
Luca Weiss 2f6f4a2afb
u-boot: update to 2019.01 (mainline Pine A64) (!152)
The Pine boots, Weston shows on a HDMI display.

[skip ci]: doesn't finish in time; ollieparanoid tested that this
compiles for armhf, aarch64, armv7
2019-01-20 02:32:13 +01:00
..
APKBUILD u-boot: update to 2019.01 (mainline Pine A64) (!152) 2019-01-20 02:32:13 +01:00
README.txt * Added device package for the pine-a64lts 2018-09-16 18:02:06 +02:00
update-u-boot * Added device package for the pine-a64lts 2018-09-16 18:02:06 +02:00

WandBoard
---------

- ROM loads boot loader from raw MMC sectors at fixed address
- NOTE: 1st partition needs to start after boot loader

- Install u-boot with:
  dd if=wandboard/SPL of=/dev/mmcblk0 bs=1k seek=1
  dd if=wandboard/u-boot.img of=/dev/mmcblk0 bs=1k seek=69
  sync

  (Note - the SD card node may vary, so adjust this as needed).

- Insert the SD card into the slot located in the bottom of the board
  (same side as the mx6 processor)

BeagleBoard
-----------

- ROM looks for 1st partition with FAT, and loads MLO from it
- NOTE: MLO needs to be the first file created on this partition

- Install u-boot with:
  cp am335x_boneblack/{MLO,u-boot.img} /media/mmcblk0p1/

Sunxi (Cubie* etc)
------------------

- ROM loads boot loader from SD-CARD sectors at fixed address
- Install u-boot with:
    sudo dd if=<board>/u-boot-sunxi-with-spl.bin of=/dev/sda bs=1024 seek=8