436c544289
On some devices, primarily with two sim slots, modem doesn't choose the sim automatically. Add an init script that would detect in which slot the sim is present and configure the modem to use it.
99 lines
3.1 KiB
Text
99 lines
3.1 KiB
Text
#!/sbin/openrc-run
|
|
|
|
# This script tries to automatically configure UIM application for Qualcomm QMI
|
|
# modems with more than one sim slot.
|
|
|
|
name="UIM Slot selection"
|
|
description="Select UIM slot and application on the embedded QMI nodem."
|
|
|
|
depend() {
|
|
# FIXME: This service may delay boot for some time, make sure that it
|
|
# runs after UI and sshd so preceived boot time isn't affected.
|
|
after *
|
|
|
|
need rmtfs
|
|
before ofono
|
|
before modemmanager
|
|
}
|
|
|
|
# All of the logic is placed in the service start method as we want to block
|
|
# other services while the modem isn't ready yet.
|
|
start() {
|
|
# libqmi must be present to use this script.
|
|
if ! [ -x "$(command -v qmicli)" ]
|
|
then
|
|
eend 1 'qmicli is not installed.'
|
|
return 1
|
|
fi
|
|
|
|
# Prepare a qmicli command with desired modem path.
|
|
# The modem may appear after some delay, wait for it.
|
|
count=0
|
|
while [ -z "$QMICLI_MODEM" ] && [ "$count" -lt "45" ]
|
|
do
|
|
# Check if legacy rpmsg exported device exists.
|
|
if [ -e "/dev/modem" ]
|
|
then
|
|
QMICLI_MODEM="qmicli --silent -d /dev/modem"
|
|
veinfo "Using /dev/modem"
|
|
# Check if the qmi device from wwan driver exists.
|
|
elif [ -e "/dev/wwan0qmi0" ]
|
|
then
|
|
# Using --device-open-qmi flag as we may have libqmi
|
|
# version that can't automatically detect the type yet.
|
|
QMICLI_MODEM="qmicli --silent -d /dev/wwan0qmi0 --device-open-qmi"
|
|
veinfo "Using /dev/wwan0qmi0"
|
|
# Check if QRTR is available for new devices.
|
|
elif qmicli --silent -pd qrtr://0 --uim-noop > /dev/null
|
|
then
|
|
QMICLI_MODEM="qmicli --silent -pd qrtr://0"
|
|
veinfo "Using qrtr://0"
|
|
fi
|
|
sleep 1
|
|
count=$((count+1))
|
|
done
|
|
veinfo "Waited $count seconds for modem device to appear"
|
|
|
|
if [ -z "$QMICLI_MODEM" ]
|
|
then
|
|
eend 2 'No modem available.'
|
|
return 2
|
|
fi
|
|
|
|
QMI_CARDS=$($QMICLI_MODEM --uim-get-card-status)
|
|
|
|
# Fail if all slots are empty but wait a bit for the sim to appear.
|
|
count=0
|
|
while ! printf "%s" "$QMI_CARDS" | grep -Fq "Card state: 'present'" && [ "$count" -lt "11" ]
|
|
do
|
|
sleep 1
|
|
count=$((count+1))
|
|
QMI_CARDS=$($QMICLI_MODEM --uim-get-card-status)
|
|
done
|
|
|
|
if [ "$count" -gt "10" ]
|
|
then
|
|
eend 4 'No sim present.'
|
|
return 4
|
|
fi
|
|
veinfo "Waited $count seconds for modem to come up"
|
|
|
|
# Clear the selected application in case the modem is in a bugged state
|
|
if ! printf "%s" "$QMI_CARDS" | grep -Fq "Primary GW: session doesn't exist"
|
|
then
|
|
ewarn 'Application was already selected.'
|
|
$QMICLI_MODEM --uim-change-provisioning-session='activate=no,session-type=primary-gw-provisioning' > /dev/null
|
|
fi
|
|
|
|
# Extract first available slot number and AID for usim application
|
|
# on it. This should select proper slot out of two if only one UIM is
|
|
# present or select the first one if both slots have UIM's in them.
|
|
FIRST_PRESENT_SLOT=$(printf "%s" "$QMI_CARDS" | grep "Card state: 'present'" -m1 -B1 | head -n1 | cut -c7-7)
|
|
FIRST_PRESENT_AID=$(printf "%s" "$QMI_CARDS" | grep "usim (2)" -m1 -A3 | tail -n1 | awk '{print $1}')
|
|
|
|
veinfo "Selecting $FIRST_PRESENT_AID on slot $FIRST_PRESENT_SLOT"
|
|
|
|
# Finally send the new configuration to the modem.
|
|
$QMICLI_MODEM --uim-change-provisioning-session="slot=$FIRST_PRESENT_SLOT,activate=yes,session-type=primary-gw-provisioning,aid=$FIRST_PRESENT_AID" > /dev/null
|
|
eend $?
|
|
}
|