a9412824ea
Add a replacement for the current "mainline" and "mainline-modem"
kernel variants used for the MSM8916 devices. At the moment this is
implemented using separate DTBs that are all maintained in the kernel.
Unfortunately, this does not seem likely to be accepted upstream in
the mainline kernel. They will expect to have only a single DTB that
enables all available functionality. The "no-modem" variant is a minor
but still very useful use case because it changes the audio routing:
It allows audio to work without any firmware, with more control on
sample rates, latency etc for advanced audio use cases. However,
having a potentially enabled modem requires routing all audio through
the modem. There are two separate DTBs needed for these two setups.
To avoid burdening mainline with this use case, the idea is to apply
the necessary DTB transformations as part of the lk2nd boot process.
Mainline only contains the DTB with the full functionality (audio
routed through modem). The soc-qcom-msm8916-rproc packages place
a magic file at /boot/lk2nd_rproc_mode that is read by lk2nd. When
the file contains "no-modem" lk2nd will transform the DTB to disable
the modem and change the audio routing to bypass the modem.
That way, this feature does not need to be considered in mainline
at all but can still be offered as "nice to have" by lk2nd. It also
simplifies the device packages because the selection is now common
as part of the soc-qcom-msm8916 package.
Together with a related pmbootstrap change there is a nice prompt
for selecting one of these "rproc" providers:
$ pmbootstrap init
[...]
Available providers for soc-qcom-msm8916-rproc (3):
* all: Enable all remote processors (audio goes through modem) (**default**)
* no-modem: Disable only modem (audio bypasses modem, ~80 MiB more RAM)
* none: Disable all remote processors (no WiFi/BT/modem, ~90 MiB more RAM)
Provider [default]: ...
77 lines
2.5 KiB
Text
77 lines
2.5 KiB
Text
# Maintainer: Minecrell <minecrell@minecrell.net>
|
|
# Co-Maintainer: Nikita Travkin <nikita@trvn.ru>
|
|
pkgname=soc-qcom-msm8916
|
|
pkgdesc="Common package for Qualcomm MSM8916 devices"
|
|
pkgver=13
|
|
pkgrel=0
|
|
url="https://postmarketos.org"
|
|
license="BSD-3-Clause"
|
|
arch="aarch64 armv7"
|
|
options="!check !archcheck !tracedeps pmb:cross-native"
|
|
depends="mesa-dri-gallium $pkgname-ucm swclock-offset"
|
|
subpackages="
|
|
$pkgname-ucm
|
|
$pkgname-rproc-none:rproc_none
|
|
$pkgname-rproc-no-modem:rproc_no_modem
|
|
$pkgname-rproc-all:rproc_all
|
|
"
|
|
|
|
_ucm_commit="d9c15108e4301e0dc0192fa15fddc83f623bca97"
|
|
source="$pkgname-$_ucm_commit.tar.gz::https://github.com/msm8916-mainline/alsa-ucm-conf/archive/$_ucm_commit.tar.gz
|
|
q6voiced.conf
|
|
"
|
|
|
|
package() {
|
|
# parent package is empty
|
|
mkdir -p "$pkgdir"
|
|
}
|
|
|
|
# Upstream keeps making breaking changes to UCM in patch releases.
|
|
# My last upstreaming efforts failed without ever getting a reply,
|
|
# since then UCM was entirely reworked like 3 times already...
|
|
# I don't want to fix this up every few months, so let's package a stable
|
|
# version for now. Once all the UCM refactoring upstream has settled down a bit
|
|
# we can investigate how to integrate it properly for upstreaming.
|
|
ucm() {
|
|
provides="alsa-ucm-conf"
|
|
|
|
cd "$srcdir/alsa-ucm-conf-$_ucm_commit"
|
|
mkdir -p "$subpkgdir"/usr/share/alsa
|
|
cp -r ucm2 "$subpkgdir"/usr/share/alsa
|
|
}
|
|
|
|
rproc_none() {
|
|
pkgdesc="Disable all remote processors (no WiFi/BT/modem, ~90 MiB more RAM)"
|
|
provides="soc-qcom-msm8916-rproc=$pkgver-r$pkgrel"
|
|
|
|
mkdir -p "$subpkgdir"/boot
|
|
echo none > "$subpkgdir"/boot/lk2nd_rproc_mode
|
|
}
|
|
|
|
rproc_no_modem() {
|
|
pkgdesc="Disable only modem (audio bypasses modem, ~80 MiB more RAM)"
|
|
provides="soc-qcom-msm8916-rproc=$pkgver-r$pkgrel"
|
|
provider_priority=50
|
|
|
|
mkdir -p "$subpkgdir"/boot
|
|
echo no-modem > "$subpkgdir"/boot/lk2nd_rproc_mode
|
|
}
|
|
|
|
rproc_all() {
|
|
pkgdesc="Enable all remote processors (audio goes through modem)"
|
|
provides="soc-qcom-msm8916-rproc=$pkgver-r$pkgrel"
|
|
provider_priority=100
|
|
|
|
depends="msm-modem msm-modem-uim-selection q6voiced"
|
|
install="$subpkgname.post-install"
|
|
replaces="soc-qcom-msm8916-modem"
|
|
|
|
mkdir -p "$subpkgdir"/boot
|
|
echo all > "$subpkgdir"/boot/lk2nd_rproc_mode
|
|
install -Dm644 q6voiced.conf "$subpkgdir"/etc/conf.d/q6voiced
|
|
}
|
|
|
|
sha512sums="
|
|
274ef82a949ea51ec1a1628e4793f99d22982d34165cffb8cdfabb3247f3797987652c43ad81d29f49071d184241d873362a17a1694331f402b69a8dbda42aea soc-qcom-msm8916-d9c15108e4301e0dc0192fa15fddc83f623bca97.tar.gz
|
|
3a4a9322839d4b3ef9d79668a37840a9f444954759ae3c512e694051d2f9a2573db42ad6c4c1a5c75eeb861232a27ba1a8cef9b503decd54ead25a96e3dd6f98 q6voiced.conf
|
|
"
|