pmaports/device/community/linux-postmarketos-omap/0004-arm-dts-Add-espresso10-support.patch
Mithil Bavishi 432c4991fd
linux-postmarketos-omap: Add charger (SMB347) support for espresso10 (MR 3626)
[ci:skip-build]: already built successfully in CI
2022-11-13 20:16:20 +01:00

135 lines
3.4 KiB
Diff

From b13fc38acae2bdffc1c4fda9c642276fba0884d3 Mon Sep 17 00:00:00 2001
From: Mithil Bavishi <bavishimithil@gmail.com>
Date: Thu, 20 Oct 2022 20:46:30 +0530
Subject: [PATCH 3/3] arm/dts: Add espresso10 support
---
arch/arm/boot/dts/Makefile | 1 +
.../arm/boot/dts/omap4-samsung-espresso10.dts | 103 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 89 insertions(+)
create mode 100644 arch/arm/boot/dts/omap4-samsung-espresso10.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index c0c55b1a7..51f6b70df 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -969,6 +969,7 @@ dtb-$(CONFIG_ARCH_OMAP4) += \
omap4-panda-a4.dtb \
omap4-panda-es.dtb \
omap4-samsung-espresso7.dtb \
+ omap4-samsung-espresso10.dtb \
omap4-sdp.dtb \
omap4-sdp-es23plus.dtb \
omap4-var-dvk-om44.dtb \
diff --git a/arch/arm/boot/dts/omap4-samsung-espresso10.dts b/arch/arm/boot/dts/omap4-samsung-espresso10.dts
new file mode 100644
index 000000000..3fa4b18bd
--- /dev/null
+++ b/arch/arm/boot/dts/omap4-samsung-espresso10.dts
@@ -0,0 +1,103 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/dts-v1/;
+
+#include "omap4-samsung-espresso-common.dtsi"
+#include <dt-bindings/power/summit,smb347-charger.h>
+/ {
+ model = "Samsung Galaxy Tab 2 (10 inch)";
+ compatible = "samsung,espresso10", "ti,omap4430", "ti,omap4";
+
+ i2c-gpio-5 {
+ smb347: charger@6 {
+ compatible = "summit,smb347";
+ reg = <0x6>; // 0x0C >> 1
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <0 IRQ_TYPE_EDGE_BOTH>;
+
+ summit,enable-usb-charging;
+ summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>;
+ summit,chip-temperature-threshold-celsius = <120>;
+ summit,usb-current-limit-microamp = <1800000>;
+ };
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&backlight_pins>;
+ pwms = <&pwm10 0 1600 0>;
+ power-supply = <&reg_lcd>;
+ enable-gpios = <&gpio3 31 GPIO_ACTIVE_HIGH>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <7>;
+ };
+
+ panel {
+ compatible ="samsung,ltn070nl01", "panel-lvds";
+ power-supply = <&reg_lcd>;
+ width-mm = <223>;
+ height-mm = <125>;
+ data-mapping = "jeida-24";
+ backlight = <&backlight>;
+
+ panel-timing {
+ clock-frequency = <69818000>;
+
+ hback-porch = <64>;
+ hactive = <1280>;
+ hfront-porch = <16>;
+ hsync-len = <48>;
+
+ vback-porch = <11>;
+ vactive = <800>;
+ vfront-porch = <16>;
+ vsync-len = <3>;
+
+ hsync-active = <0>;
+ vsync-active = <0>;
+ de-active = <1>;
+ pixelclk-active = <1>;
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&bridge_out>;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ touchscreen: synaptics-rmi4-i2c@20 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&touch_pins>;
+
+ avdd-supply = <&reg_touch_ldo_en>;
+ vdd-supply = <&vcxio>;
+
+ syna,reset-delay-ms = <200>;
+ syna,startup-delay-ms = <200>;
+
+ touchscreen-size-x = <1279>;
+ touchscreen-size-y = <799>;
+
+ rmi4-f01@1 {
+ reg = <0x01>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ syna,sensor-type = <1>;
+ };
+ };
+};
--
2.25.1