pmaports/device/testing/device-samsung-klimtlte/APKBUILD
Henrik Grimler 98cdee89e7
device-samsung-klimtlte: depend on postmarketos-initramfs-minimal (MR 5365)
.. when using mainline kernel.  The boot partition on the device is
only 8 MB, while built boot.img is 11 MB.  Fix by decreasing initramfs
size by depending on postmarketos-initramfs-minimal.  Problems were
likely introduced by postmarketOS/pmaports!5000.
2024-07-23 16:18:15 -07:00

70 lines
2 KiB
Text

# Maintainer: Henrik Grimler <henrik@grimler.se>
# Reference: <https://postmarketos.org/devicepkg>
pkgname=device-samsung-klimtlte
pkgdesc="Samsung Galaxy Tab S 8.4 LTE"
pkgver=2
pkgrel=1
url="https://postmarketos.org"
license="MIT"
arch="armv7"
options="!check !archcheck"
depends="
postmarketos-base
mkbootimg
"
makedepends="devicepkg-dev"
source="deviceinfo"
subpackages="
$pkgname-kernel-downstream:kernel_downstream
$pkgname-kernel-mainline:kernel_mainline
$pkgname-nonfree-firmware:nonfree_firmware
$pkgname-nonfree-firmware-downstream:nonfree_firmware_downstream
$pkgname-nonfree-firmware-mainline:nonfree_firmware_mainline
"
build() {
devicepkg_build $startdir $pkgname
}
package() {
devicepkg_package $startdir $pkgname
}
kernel_downstream() {
pkgdesc="Display works, wifi is broken (see device table for details)"
depends="
linux-samsung-klimtlte
msm-fb-refresher
postmarketos-base-downstream
"
devicepkg_subpackage_kernel $startdir $pkgname $subpkgname
}
kernel_mainline() {
pkgdesc="Mainline WIP (usb networking and wifi works but not much else)"
depends="linux-postmarketos-exynos5 postmarketos-initramfs-minimal"
devicepkg_subpackage_kernel $startdir $pkgname $subpkgname
}
nonfree_firmware() {
pkgdesc="Non-free firmware for the Samsung Galaxy Tab S 8.4"
mkdir "$subpkgdir"
}
nonfree_firmware_downstream() {
pkgdesc="Non-free firmware for klimtlte when using downstream kernel"
install_if="$pkgname=$pkgver-r$pkgrel $pkgname-nonfree-firmware=$pkgver-r$pkgrel $pkgname-kernel-downstream"
depends="firmware-samsung-klimt-downstream>=3.0-r0"
mkdir "$subpkgdir"
}
nonfree_firmware_mainline() {
pkgdesc="Non-free firmware for klimtlte when using mainline kernel"
install_if="$pkgname=$pkgver-r$pkgrel $pkgname-nonfree-firmware=$pkgver-r$pkgrel $pkgname-kernel-mainline"
depends="firmware-samsung-klimt-mainline>=3.0-r0"
mkdir "$subpkgdir"
}
sha512sums="
1b5adb005b959498ac50c21066fd1250dfedbbed73c0a7432fdc40ca27f44d5b967298de956f4980532b301728566d7969d693ab4b007bd3bb09997fe05504c6 deviceinfo
"