933688fb85
This gets Bluetooth working for the Sparklan card. btattach doesn't work on the Librem5 at the moment (see [1]) so even though it's deprecated let's use hciattach to get things working. 1: https://source.puri.sm/Librem5/librem5-base/-/issues/76 Signed-off-by: Alistair Francis <alistair@alistair23.me> [ci:skip-build] already built successfully in CI
216 lines
8.8 KiB
Text
216 lines
8.8 KiB
Text
# Reference: <https://postmarketos.org/devicepkg>
|
|
# Maintainer: Alistair Francis <alistair@alistair23.me>
|
|
# Co-Maintainer: Newbyte <newbyte@postmarketos.org>
|
|
# Contributor: Clayton Craft <clayton@craftyguy.net>
|
|
pkgname=device-purism-librem5
|
|
pkgver=4
|
|
pkgrel=0
|
|
_confver=64
|
|
_purismrel=1
|
|
# <librem5-base ver>.<purism release>
|
|
_purismver=${_confver}pureos$_purismrel
|
|
pkgdesc="Purism Librem 5 Phone (librem5-base: $_purismver)"
|
|
url="https://postmarketos.org"
|
|
license="MIT"
|
|
arch="aarch64"
|
|
options="!check !archcheck"
|
|
depends="
|
|
alsa-ucm-conf
|
|
bluez
|
|
bluez-deprecated
|
|
bm818-tools
|
|
gnss-share
|
|
i2c-tools
|
|
iw
|
|
linux-purism-librem5>=6.3
|
|
mesa-egl
|
|
postmarketos-base
|
|
u-boot-librem5
|
|
u-boot-tools
|
|
"
|
|
makedepends="devicepkg-dev"
|
|
builddir=$srcdir/librem5-base-pureos-$_confver
|
|
source="
|
|
https://source.puri.sm/Librem5/librem5-base/-/archive/pureos/$_purismver/librem5-base-pureos-$_purismver.tar.gz
|
|
00-mesa.sh
|
|
deviceinfo
|
|
modules-initfs
|
|
flash_script.lst
|
|
modprobe.d_rsi.conf
|
|
modules-load.d_librem5.conf
|
|
pcscd-librem5-reader.conf
|
|
pcscd-librem5.initd
|
|
uboot-script.cmd
|
|
xorg.conf
|
|
70-librem5-xwayland-accel.sh
|
|
0001-udev-cameras-use-correct-path-for-modprobe-on-Alpine.patch
|
|
l5-brcm-bt-enable.initd
|
|
l5-lockdown-support.initd
|
|
l5-ship-mode.initd
|
|
modemmanager.conf
|
|
udev/70-brcm-bluetooth.rules
|
|
udev/70-wifi-pm.rules
|
|
"
|
|
subpackages="
|
|
$pkgname-camera
|
|
$pkgname-gnome
|
|
$pkgname-nonfree-firmware:nonfree_firmware
|
|
$pkgname-pulseaudio
|
|
$pkgname-smartcard
|
|
$pkgname-tinydm
|
|
$pkgname-usbguard
|
|
$pkgname-x11
|
|
"
|
|
# TODO: remove "replaces" when upstream ucm has proper L5 support...
|
|
replaces="alsa-ucm-conf"
|
|
install="$pkgname.post-install $pkgname.post-upgrade"
|
|
|
|
builddir="$srcdir/librem5-base-pureos-$_purismver"
|
|
|
|
build() {
|
|
mkimage -A arm64 -C none -O linux -T script -d "$srcdir/uboot-script.cmd" "$srcdir/boot.scr"
|
|
devicepkg_build $startdir $pkgname
|
|
}
|
|
|
|
gnome() {
|
|
install_if="$pkgname=$pkgver-r$pkgrel postmarketos-base-ui-gnome"
|
|
depends="
|
|
wys
|
|
"
|
|
install -D -m644 "$builddir"/default/org.freedesktop.ModemManager1.pkla \
|
|
"$subpkgdir"/var/lib/polkit-1/localauthority/10-vendor.d/org.freedesktop.ModemManager1.pkla
|
|
}
|
|
|
|
camera() {
|
|
install_if="$pkgname=$pkgver-r$pkgrel postmarketos-default-camera"
|
|
depends="millipixels"
|
|
mkdir -p "$subpkgdir"
|
|
}
|
|
|
|
pulseaudio() {
|
|
pkgdesc="Pulseaudio support for the Librem 5"
|
|
install_if="$pkgname pulseaudio"
|
|
# install config files from upstream Purism
|
|
mkdir -p "$subpkgdir"/etc/pulse/
|
|
cp -r "$builddir"/default/audio/pulse/daemon.conf.d "$subpkgdir"/etc/pulse/
|
|
install -D -m644 "$builddir"/default/audio/pulse/librem5.pa "$subpkgdir"/etc/pulse/librem5.pa
|
|
mkdir -p "$subpkgdir"/usr/share/pulseaudio/alsa-mixer
|
|
cp -r "$builddir"/default/audio/profile-sets "$subpkgdir"/usr/share/pulseaudio/alsa-mixer/
|
|
}
|
|
|
|
tinydm() {
|
|
pkgdesc="Tinydm config for the Librem 5"
|
|
install_if="$pkgname tinydm"
|
|
install -Dm755 "$srcdir"/70-librem5-xwayland-accel.sh \
|
|
"$subpkgdir"/etc/tinydm.d/env-wayland.d/70-librem5-xwayland-accel.sh
|
|
}
|
|
|
|
smartcard() {
|
|
pkgdesc="OpenPGP SmartCard support for the Librem 5"
|
|
depends="$pkgname ccid gnupg-scdaemon pcsc-lite pcsc-tools"
|
|
install_if="$pkgname pcsc-tools"
|
|
install="$install $subpkgname.post-install"
|
|
|
|
install -D -m644 "$srcdir"/pcscd-librem5-reader.conf \
|
|
"$subpkgdir"/etc/reader.conf.d/librem5-ttxs-reader
|
|
|
|
install -D -m755 "$srcdir"/pcscd-librem5.initd \
|
|
"$subpkgdir"/etc/init.d/pcscd-librem5
|
|
}
|
|
|
|
usbguard() {
|
|
pkgdesc="USB guard support for the Librem 5"
|
|
install_if="$pkgname usbguard"
|
|
install -Dm600 "$builddir"/default/usbguard/librem5.conf \
|
|
-t "$subpkgdir"/etc/usbguard/rules.d/
|
|
}
|
|
|
|
x11() {
|
|
install_if="$pkgname xorg-server"
|
|
install -Dm644 "$srcdir"/xorg.conf \
|
|
"$subpkgdir"/etc/X11/xorg.conf.d/10-video.conf
|
|
}
|
|
|
|
package() {
|
|
install -D -m644 "$srcdir"/boot.scr \
|
|
"$pkgdir"/boot/boot.scr
|
|
install -D -m644 "$srcdir"/modprobe.d_rsi.conf "$pkgdir"/etc/modprobe.d/rsi.conf
|
|
install -D -m644 "$srcdir"/modules-load.d_librem5.conf "$pkgdir"/etc/modules-load.d/librem5.conf
|
|
install -D -m644 "$srcdir"/00-mesa.sh "$pkgdir"/etc/profile.d/00-mesa.sh
|
|
install -D -m644 "$srcdir"/flash_script.lst "$pkgdir"/usr/share/uuu/flash_script.lst
|
|
|
|
# udev
|
|
for f in "$builddir"/debian/*.udev; do
|
|
# rename the udev rules, dropping the default prefix and (arbitrarily...) using "85-"
|
|
install -Dm644 "$f" \
|
|
"$pkgdir"/usr/lib/udev/rules.d/85-"$(basename ${f//librem5-base-defaults./}).rules"
|
|
done
|
|
for f in "$srcdir"/*.rules; do
|
|
# rename the udev rules, dropping the default prefix and (arbitrarily...) using "85-"
|
|
install -Dm644 "$f" \
|
|
"$pkgdir"/usr/lib/udev/rules.d/"$(basename $f)"
|
|
done
|
|
|
|
# Bluetooth (Sparklan)
|
|
install -Dm755 "$srcdir"/l5-brcm-bt-enable.initd \
|
|
"$pkgdir"/etc/init.d/l5-brcm-bt-enable
|
|
|
|
# install audio config files from Purism
|
|
install -Dm644 "$builddir"/default/audio/ucm2/simple-card/Librem\ 5.conf \
|
|
"$pkgdir"/usr/share/alsa/ucm2/NXP/iMX8/Librem_5/Librem\ 5.conf
|
|
install -Dm644 "$builddir"/default/audio/ucm2/simple-card/HiFi.conf \
|
|
"$pkgdir"/usr/share/alsa/ucm2/NXP/iMX8/Librem_5/HiFi.conf
|
|
mkdir -p "$pkgdir"/usr/share/alsa/ucm2/conf.d/simple-card
|
|
# relative path seems to be required or else alsa-lib can't figure it out
|
|
ln -s ../../NXP/iMX8/Librem_5/Librem\ 5.conf \
|
|
"$pkgdir"/usr/share/alsa/ucm2/conf.d/simple-card/Librem\ 5.conf
|
|
|
|
# ship mode service
|
|
install -Dm755 "$builddir"/default/shipmode/l5-poweroff-shipmode \
|
|
-t "$pkgdir"/usr/sbin/
|
|
|
|
install -D -m755 "$srcdir"/l5-ship-mode.initd \
|
|
"$pkgdir"/etc/init.d/l5-ship-mode
|
|
|
|
# lockdown support
|
|
install -Dm755 "$builddir"/default/lockdown-support/lockdown-support.sh \
|
|
-t "$pkgdir"/usr/sbin/
|
|
install -Dm755 "$builddir"/default/lockdown-support/modprobe.d/librem5-lsm9ds1.conf \
|
|
-t "$pkgdir"/etc/modprobe.d/
|
|
install -Dm755 "$srcdir"/l5-lockdown-support.initd \
|
|
"$pkgdir"/etc/init.d/l5-lockdown-support
|
|
|
|
# Modem
|
|
install -Dm644 "$srcdir"/modemmanager.conf \
|
|
"$pkgdir"/etc/conf.d/modemmanager
|
|
|
|
devicepkg_package $startdir $pkgname
|
|
}
|
|
|
|
nonfree_firmware() {
|
|
pkgdesc="Wifi and Bluetooth firmware"
|
|
depends="firmware-siliconlabs-rs9116 firmware-brcm43752"
|
|
mkdir "$subpkgdir"
|
|
}
|
|
|
|
sha512sums="
|
|
46bff1208af87c9b6b2c61daaeeb95c3ff30617dce548a5877ea279ff9ced5338caaa32827bfbd98f3cb7c92d3535c27224c55bf1c03bf82f99e8ca53fe4cf6c librem5-base-pureos-64pureos1.tar.gz
|
|
2e72d9a084ecd6c96cafbbd8fda461ae8b2ebd14ffda601d9f36d73f08f04088213de17da078293ddd958d4c76d33148c7af6e252eb0709f6934855a55578509 00-mesa.sh
|
|
703d12826464eb2bdb6bf4a7d10adb73b37564d3792794523b252f0f7cb66184add150a6938580cc33615281d1c0abd7ff158ae2143b89fa28c0cd3dc367e5ff deviceinfo
|
|
138ed85e6509e4611bf21a0061c312e6c2ce60f722ee9e4565d19c5f025301d4df3fa321343524219a54b20c5288dc6ed1b058ac66f4d608af22eb5bc83e84c6 modules-initfs
|
|
ccb47fd421c5e35a8def8e6fb61dad99e42cf542690068a68f90c257e41d33f45f1069db0a8d89372d9029681812957033995639a6a8a5e3eed48019325e0f4d flash_script.lst
|
|
3f62c04eb92d850e32d5e1b17534dec753563342ea6c4f9dc2572700d4f6eeb8ae8cd8e8e4f1b0f5c61f21d87bc61c02212f27313986157220003d78e2d69505 modprobe.d_rsi.conf
|
|
a0740e405781ec6ef765fdc9f5700c95adbb241c45c97b9384ba68cdece662cb216ca5918640042f6e65a5d1b1a9099936382c99b49a44303f7b6d77a075a471 modules-load.d_librem5.conf
|
|
8ef4ec7a9e9a4fb801d207e7d94b627aacc9243a93b0ec28e0823a6f44b8102416c040e4ddf499f87bb9dfa960cf6f627b008b79f197f6814b3fd881e18ae8ef pcscd-librem5-reader.conf
|
|
2618b40eebd3602066ee75ab85cbdbb4cfee498def9879c95a304f05a6eeedf1ab28c5dd9fa5efc8f88c790f49c96458c61d5dfe8a3ca0f96bcc0e244313ab01 pcscd-librem5.initd
|
|
976c36b469a5c36e1823c35e4e1bc41d88f12c6710d1d4f8f904349ab06ee58a6c728dc4b705b7578427e322c57ecd4e4c61fc62effc88e25987f6ea3e6ffcc2 uboot-script.cmd
|
|
1cbc65cf2cb8fad4b0332d012a0256a266205b9b64371f5c0dae09dbb7f1e45b254e8c43993b896097e9d7035a72d547d9bce1ab2133addc56a5abdb80b44616 xorg.conf
|
|
fad386071fc45f9880a94cc8004fabd5d98b3e6a12606c98d8e72e0208f22ab54f03b921f5967a959782507e2bff67d2fa92e46d8cd242011a3afcdbda529279 70-librem5-xwayland-accel.sh
|
|
b45749fcddfd65a302b502bcabfa5828d1b63e45d844fd50e44009a756b919db20fe9526102947c0f0dfcdffe4a037e5050fe1b24fb915933ce0837f49759378 0001-udev-cameras-use-correct-path-for-modprobe-on-Alpine.patch
|
|
177ec87ec1f110d7c4253a20375c6771c6cfac41057b02bd673caea5399a799a59c5e087037fccf7a104447e6890499a2194aa34bab14df203fa95168ced75d7 l5-brcm-bt-enable.initd
|
|
f4b314d553655f7975445ac0a33099923e20dabb082c07e2cf6a78e4118c143d777dd4ad2c09cbc388600bdefe8deb3073fbd15b238772ddf09c66ac46415590 l5-lockdown-support.initd
|
|
c723764d507ccd4b04aa5ce79b1d1ebc131873cdc37a943cb0f92b8a08a3c69eb9e0d31fcd4589fd8c40a9676bae9897e4f12ec2ebe4db8214ac85669ef35a53 l5-ship-mode.initd
|
|
e089b0c4320c8cb5a6bd1e85f12b6afb24d035958f2bdc7a8ed2cee5b0f379e6fdfad876d8d22c03c9cb0576b4aa7c20c3e9986ba8147500add6d93b44e5f266 modemmanager.conf
|
|
b7f5ecd0fefe8a122ed20e7ac21a23a65e007f62a7343c7178712955ed580f5473ca923cedb9f86cd10ecb13a76ab50c91a2f7b8b2fd456ee8420aeca75f3fec 70-brcm-bluetooth.rules
|
|
8b6fa7b12c15f439c561901f3ffe24a1ef2a0c343401c0a79281060854ab29e08a1fb5e7adae8684b12aa9f535ed99e2dad993dce9724822cb0fbf2497dd86e5 70-wifi-pm.rules
|
|
"
|