sromrev=3
vendid=0x14e4
devid=0x432f
boardtype=0x57e

# board revision 1.1
boardrev=0x11

# boardflags
boardflags=0x10000200
boardflags2=0x00400000

# specify the xtalfreq if it is otherthan 38.4MHz
xtalfreq=37400

aa2g=3
aa5g=1

ag0=0x82
ag1=0x84

# 11g paparams
pa0b0=5107
pa0b1=64308
pa0b2=65182
pa0itssit=62
pa0maxpwr=66
opo=0
mcs2gpo0=0x2222
mcs2gpo1=0x2222

# sel = 1 : 20% evm  sel = 2 : 27% evm  sel = 3 : 16% evm
cckdigfilttype=1

# 11a paparams lowband
pa1lob0=6654
pa1lob1=63794
pa1lob2=65134
# paparams midband
pa1b0=5970
pa1b1=63982
pa1b2=65122
#paparams high band
pa1hib0=5910
pa1hib1=63998
pa1hib2=65130

pa1itssit=62
pa1maxpwr=60
opo=0
mcs5gpo=0x22222222

# 11g rssi params
rssismf2g=0xa
rssismc2g=0xb
rssisav2g=0x3
bxa2g=0

# 11a rssi params
rssismf5g=0x8
rssismc5g=0x6
rssisav5g=0x0
bxa2g=0

# country code
ccode=ALL
cctl=0x0

# Channel gain adjustments 
5g_cga=0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0
boardnum=2048
macaddr=00:90:4c:c5:34:23
#######
nocrc=1

#for mfgc
otpimagesize=182

# sdio extra configs
hwhdr=0x05ffff031030031003100000

#This generates empty F1, F2 and F3 tuple chains, and may be used if the host SDIO stack does not require the standard tuples.
RAW1=80 02 fe ff

#This includes the standard FUNCID and FUNCE tuples in the F1, F2, F3 and common CIS.
#RAW1=80 32 fe 21 02 0c 00 22 2a 01 01 00 00 c5 0 e6 00 00 00 00 00 40 00 00 ff ff 80 00 00 00 00 00 00 00 00 00 00 c8 00 00 00 00 00 00 00 00 00 00 00 00 00 ff 20 04 D0 2 29 43 21 02 0c 00 22 04 00 20 00 5A