From 2dbda86d5f83841ad6904a75ae5a04f1241133fe Mon Sep 17 00:00:00 2001 From: Sergey Larin Date: Fri, 28 Jun 2019 22:54:20 +0300 Subject: [PATCH] ARM: dts: tegra20-glide: Fix audio power binding The LDO definition in wm8994 node is used for internal LDOs, but not for powering the chip, so we use the fixed regulator to resolve this. All regulators of wm8994 are defined to suppress messages in dmesg. Signed-off-by: Sergey Larin --- arch/arm/boot/dts/tegra20-glide.dts | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/tegra20-glide.dts b/arch/arm/boot/dts/tegra20-glide.dts index 6a85ab96b763..74edc637f4d1 100644 --- a/arch/arm/boot/dts/tegra20-glide.dts +++ b/arch/arm/boot/dts/tegra20-glide.dts @@ -908,12 +908,21 @@ compatible = "wlf,wm8994"; reg = <0x1a>; + DBVDD-supply = <&wlf_ldo>; + DCVDD-supply = <&wlf_ldo>; + AVDD1-supply = <&wlf_ldo>; + AVDD2-supply = <&wlf_ldo>; + CPVDD-supply = <&wlf_ldo>; + SPKVDD1-supply = <&wlf_ldo>; + SPKVDD2-supply = <&wlf_ldo>; + gpio-controller; #gpio-cells = <2>; - wlf,ldo1ena = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_HIGH>; - wlf,gpio-cfg = <0xA101 0 0 0 0 0 0 0 0 0 0>; + /* Probably doesn't make sense because typoed in driver */ + wlf,ldoena-always-driven; + wlf,gpio-cfg = <0xA101 0 0 0 0 0 0 0 0 0 0>; }; }; @@ -1798,6 +1807,16 @@ gpio = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; enable-active-high; }; + + wlf_ldo: regulator@9 { + compatible = "regulator-fixed"; + reg = <9>; + regulator-name = "wlf-wm8994-ldo"; + gpio = <&gpio TEGRA_GPIO(X, 5) GPIO_ACTIVE_HIGH>; + regulator-enable-ramp-delay = <125000>; + regulator-boot-on; + enable-active-high; + }; }; sound { -- 2.22.0