# Reference: # Maintainer: Clayton Craft # Co-Maintainer: Alistair Francis # Co-Maintainer: Newbyte pkgname=device-purism-librem5 pkgver=1.51 pkgrel=1 _confver=64 _purismrel=1 # . _purismver=${_confver}pureos$_purismrel pkgdesc="Purism Librem 5 Phone (librem5-base: $_purismver)" url="https://postmarketos.org" license="MIT" arch="aarch64" options="!check !archcheck" depends=" alsa-ucm-conf bluez bm818-tools gnss-share i2c-tools iw linux-purism-librem5>=6.3 mesa-egl postmarketos-base u-boot-librem5 u-boot-tools " makedepends="devicepkg-dev" builddir=$srcdir/librem5-base-pureos-$_confver source=" https://source.puri.sm/Librem5/librem5-base/-/archive/pureos/$_purismver/librem5-base-pureos-$_purismver.tar.gz 00-mesa.sh deviceinfo modules-initfs flash_script.lst modprobe.d_rsi.conf modules-load.d_librem5.conf pcscd-librem5-reader.conf pcscd-librem5.initd uboot-script.cmd xorg.conf 70-librem5-xwayland-accel.sh 0001-udev-cameras-use-correct-path-for-modprobe-on-Alpine.patch l5-brcm-bt-enable.initd l5-lockdown-support.initd l5-ship-mode.initd modemmanager.conf udev/70-brcm-bluetooth.rules udev/70-wifi-pm.rules udev/77-mm-broadmobi-port-types.rules " subpackages=" $pkgname-camera $pkgname-gnome $pkgname-nonfree-firmware:nonfree_firmware $pkgname-pulseaudio $pkgname-smartcard $pkgname-tinydm $pkgname-usbguard $pkgname-x11 " # TODO: remove "replaces" when upstream ucm has proper L5 support... replaces="alsa-ucm-conf" install="$pkgname.post-install $pkgname.post-upgrade" builddir="$srcdir/librem5-base-pureos-$_purismver" build() { mkimage -A arm64 -C none -O linux -T script -d "$srcdir/uboot-script.cmd" "$srcdir/boot.scr" devicepkg_build $startdir $pkgname } gnome() { install_if="$pkgname=$pkgver-r$pkgrel postmarketos-base-ui-gnome" depends=" wys " install -D -m644 "$builddir"/default/org.freedesktop.ModemManager1.pkla \ "$subpkgdir"/var/lib/polkit-1/localauthority/10-vendor.d/org.freedesktop.ModemManager1.pkla } camera() { install_if="$pkgname=$pkgver-r$pkgrel postmarketos-default-camera" depends="millipixels" mkdir -p "$subpkgdir" } pulseaudio() { pkgdesc="Pulseaudio support for the Librem 5" install_if="$pkgname pulseaudio" # install config files from upstream Purism mkdir -p "$subpkgdir"/etc/pulse/ cp -r "$builddir"/default/audio/pulse/daemon.conf.d "$subpkgdir"/etc/pulse/ install -D -m644 "$builddir"/default/audio/pulse/librem5.pa "$subpkgdir"/etc/pulse/librem5.pa mkdir -p "$subpkgdir"/usr/share/pulseaudio/alsa-mixer cp -r "$builddir"/default/audio/profile-sets "$subpkgdir"/usr/share/pulseaudio/alsa-mixer/ } tinydm() { pkgdesc="Tinydm config for the Librem 5" install_if="$pkgname tinydm" install -Dm755 "$srcdir"/70-librem5-xwayland-accel.sh \ "$subpkgdir"/etc/tinydm.d/env-wayland.d/70-librem5-xwayland-accel.sh } smartcard() { pkgdesc="OpenPGP SmartCard support for the Librem 5" depends="$pkgname ccid gnupg-scdaemon pcsc-lite pcsc-tools" install_if="$pkgname pcsc-tools" install="$install $subpkgname.post-install" install -D -m644 "$srcdir"/pcscd-librem5-reader.conf \ "$subpkgdir"/etc/reader.conf.d/librem5-ttxs-reader install -D -m755 "$srcdir"/pcscd-librem5.initd \ "$subpkgdir"/etc/init.d/pcscd-librem5 } usbguard() { pkgdesc="USB guard support for the Librem 5" install_if="$pkgname usbguard" install -Dm600 "$builddir"/default/usbguard/librem5.conf \ -t "$subpkgdir"/etc/usbguard/rules.d/ } x11() { install_if="$pkgname xorg-server" install -Dm644 "$srcdir"/xorg.conf \ "$subpkgdir"/etc/X11/xorg.conf.d/10-video.conf } package() { install -D -m644 "$srcdir"/boot.scr \ "$pkgdir"/boot/boot.scr install -D -m644 "$srcdir"/modprobe.d_rsi.conf "$pkgdir"/etc/modprobe.d/rsi.conf install -D -m644 "$srcdir"/modules-load.d_librem5.conf "$pkgdir"/etc/modules-load.d/librem5.conf install -D -m644 "$srcdir"/00-mesa.sh "$pkgdir"/etc/profile.d/00-mesa.sh install -D -m644 "$srcdir"/flash_script.lst "$pkgdir"/usr/share/uuu/flash_script.lst # udev for f in "$builddir"/debian/*.udev; do # rename the udev rules, dropping the default prefix and (arbitrarily...) using "85-" install -Dm644 "$f" \ "$pkgdir"/usr/lib/udev/rules.d/85-"$(basename ${f//librem5-base-defaults./}).rules" done for f in "$srcdir"/*.rules; do # rename the udev rules, dropping the default prefix and (arbitrarily...) using "85-" install -Dm644 "$f" \ "$pkgdir"/usr/lib/udev/rules.d/"$(basename $f)" done # Bluetooth (Sparklan) install -Dm755 "$srcdir"/l5-brcm-bt-enable.initd \ "$pkgdir"/etc/init.d/l5-brcm-bt-enable # install audio config files from Purism install -Dm644 "$builddir"/default/audio/ucm2/simple-card/Librem\ 5.conf \ "$pkgdir"/usr/share/alsa/ucm2/NXP/iMX8/Librem_5/Librem\ 5.conf install -Dm644 "$builddir"/default/audio/ucm2/simple-card/HiFi.conf \ "$pkgdir"/usr/share/alsa/ucm2/NXP/iMX8/Librem_5/HiFi.conf mkdir -p "$pkgdir"/usr/share/alsa/ucm2/conf.d/simple-card # relative path seems to be required or else alsa-lib can't figure it out ln -s ../../NXP/iMX8/Librem_5/Librem\ 5.conf \ "$pkgdir"/usr/share/alsa/ucm2/conf.d/simple-card/Librem\ 5.conf # ship mode service install -Dm755 "$builddir"/default/shipmode/l5-poweroff-shipmode \ -t "$pkgdir"/usr/sbin/ install -D -m755 "$srcdir"/l5-ship-mode.initd \ "$pkgdir"/etc/init.d/l5-ship-mode # lockdown support install -Dm755 "$builddir"/default/lockdown-support/lockdown-support.sh \ -t "$pkgdir"/usr/sbin/ install -Dm755 "$builddir"/default/lockdown-support/modprobe.d/librem5-lsm9ds1.conf \ -t "$pkgdir"/etc/modprobe.d/ install -Dm755 "$srcdir"/l5-lockdown-support.initd \ "$pkgdir"/etc/init.d/l5-lockdown-support # Modem install -Dm644 "$srcdir"/modemmanager.conf \ "$pkgdir"/etc/conf.d/modemmanager devicepkg_package $startdir $pkgname } nonfree_firmware() { pkgdesc="Wifi and Bluetooth firmware" depends="firmware-siliconlabs-rs9116 firmware-brcm43752" mkdir "$subpkgdir" } sha512sums=" 46bff1208af87c9b6b2c61daaeeb95c3ff30617dce548a5877ea279ff9ced5338caaa32827bfbd98f3cb7c92d3535c27224c55bf1c03bf82f99e8ca53fe4cf6c librem5-base-pureos-64pureos1.tar.gz 2e72d9a084ecd6c96cafbbd8fda461ae8b2ebd14ffda601d9f36d73f08f04088213de17da078293ddd958d4c76d33148c7af6e252eb0709f6934855a55578509 00-mesa.sh 703d12826464eb2bdb6bf4a7d10adb73b37564d3792794523b252f0f7cb66184add150a6938580cc33615281d1c0abd7ff158ae2143b89fa28c0cd3dc367e5ff deviceinfo 138ed85e6509e4611bf21a0061c312e6c2ce60f722ee9e4565d19c5f025301d4df3fa321343524219a54b20c5288dc6ed1b058ac66f4d608af22eb5bc83e84c6 modules-initfs ccb47fd421c5e35a8def8e6fb61dad99e42cf542690068a68f90c257e41d33f45f1069db0a8d89372d9029681812957033995639a6a8a5e3eed48019325e0f4d flash_script.lst 3f62c04eb92d850e32d5e1b17534dec753563342ea6c4f9dc2572700d4f6eeb8ae8cd8e8e4f1b0f5c61f21d87bc61c02212f27313986157220003d78e2d69505 modprobe.d_rsi.conf a0740e405781ec6ef765fdc9f5700c95adbb241c45c97b9384ba68cdece662cb216ca5918640042f6e65a5d1b1a9099936382c99b49a44303f7b6d77a075a471 modules-load.d_librem5.conf 8ef4ec7a9e9a4fb801d207e7d94b627aacc9243a93b0ec28e0823a6f44b8102416c040e4ddf499f87bb9dfa960cf6f627b008b79f197f6814b3fd881e18ae8ef pcscd-librem5-reader.conf 2618b40eebd3602066ee75ab85cbdbb4cfee498def9879c95a304f05a6eeedf1ab28c5dd9fa5efc8f88c790f49c96458c61d5dfe8a3ca0f96bcc0e244313ab01 pcscd-librem5.initd 659c1801b6172c137db091a5850b467b5c667a5d0392c3d4f9cd767916ded20f09a494ad3c07cae09e9151909aca13208d3d0c681e9d4ec15681078c7046444b uboot-script.cmd 1cbc65cf2cb8fad4b0332d012a0256a266205b9b64371f5c0dae09dbb7f1e45b254e8c43993b896097e9d7035a72d547d9bce1ab2133addc56a5abdb80b44616 xorg.conf fad386071fc45f9880a94cc8004fabd5d98b3e6a12606c98d8e72e0208f22ab54f03b921f5967a959782507e2bff67d2fa92e46d8cd242011a3afcdbda529279 70-librem5-xwayland-accel.sh b45749fcddfd65a302b502bcabfa5828d1b63e45d844fd50e44009a756b919db20fe9526102947c0f0dfcdffe4a037e5050fe1b24fb915933ce0837f49759378 0001-udev-cameras-use-correct-path-for-modprobe-on-Alpine.patch d9ebb7acddce8005909505b245140913ea3096a3ab8658ecbe2bf905953ba51aed4188b1d006d4d5bfd10c5e0ebca0150fec67d8c6d156d105021e9e4598b878 l5-brcm-bt-enable.initd f4b314d553655f7975445ac0a33099923e20dabb082c07e2cf6a78e4118c143d777dd4ad2c09cbc388600bdefe8deb3073fbd15b238772ddf09c66ac46415590 l5-lockdown-support.initd c723764d507ccd4b04aa5ce79b1d1ebc131873cdc37a943cb0f92b8a08a3c69eb9e0d31fcd4589fd8c40a9676bae9897e4f12ec2ebe4db8214ac85669ef35a53 l5-ship-mode.initd e089b0c4320c8cb5a6bd1e85f12b6afb24d035958f2bdc7a8ed2cee5b0f379e6fdfad876d8d22c03c9cb0576b4aa7c20c3e9986ba8147500add6d93b44e5f266 modemmanager.conf b7f5ecd0fefe8a122ed20e7ac21a23a65e007f62a7343c7178712955ed580f5473ca923cedb9f86cd10ecb13a76ab50c91a2f7b8b2fd456ee8420aeca75f3fec 70-brcm-bluetooth.rules 8b6fa7b12c15f439c561901f3ffe24a1ef2a0c343401c0a79281060854ab29e08a1fb5e7adae8684b12aa9f535ed99e2dad993dce9724822cb0fbf2497dd86e5 70-wifi-pm.rules 00355d9ad085a77e157f3c62eb4f1bcac2823d3b341e34d1128edbfb1444fba83e8eacd263ea61da9f6d853f1328ab7fbe5ea63bd08c8a1bc9b8eaf44ae1f1c6 77-mm-broadmobi-port-types.rules "