From faf5874c12ec57232e5389691d12db1a945629bb Mon Sep 17 00:00:00 2001 From: Martijn Braam Date: Sat, 20 Apr 2019 01:19:48 +0200 Subject: [PATCH] dts: add dontbeevil (pinephone devkit) * arm64: dts: allwinner: add support for pinephone devkit * dontbeevil: add separate dts for longts devkit * dontbeevil: add flash * dontbeevil: connect the flash to the camera * dontbeevil: use new flash dt binding --- arch/arm64/boot/dts/allwinner/Makefile | 2 + .../sun50i-a64-dontbeevil-longts.dts | 14 + .../dts/allwinner/sun50i-a64-dontbeevil.dts | 476 ++++++++++++++++++ 3 files changed, 492 insertions(+) create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-dontbeevil-longts.dts create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-dontbeevil.dts diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile index 41ce680e5f8d..6740e6a97161 100644 --- a/arch/arm64/boot/dts/allwinner/Makefile +++ b/arch/arm64/boot/dts/allwinner/Makefile @@ -1,6 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-amarula-relic.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-bananapi-m64.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-dontbeevil.dtb +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-dontbeevil-longts.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-nanopi-a64.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-oceanic-5205-5inmfd.dtb dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-olinuxino.dtb diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-dontbeevil-longts.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-dontbeevil-longts.dts new file mode 100644 index 000000000000..49f71536649b --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-dontbeevil-longts.dts @@ -0,0 +1,14 @@ +/dts-v1/; + +#include "sun50i-a64-dontbeevil.dts" + +/ { + model = "PinePhone Don't be evil development kit with long touch cable"; + compatible = "pine64,sopine-baseboard", "pine64,sopine", + "allwinner,sun50i-a64"; + +}; + +&touchscreen { + touchscreen-inverted-x; +}; diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-dontbeevil.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-dontbeevil.dts new file mode 100644 index 000000000000..15a91f2d6202 --- /dev/null +++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-dontbeevil.dts @@ -0,0 +1,476 @@ +/* + * Copyright (c) 2017 Icenowy Zheng + * + * Based on sun50i-a64-pine64.dts, which is: + * Copyright (c) 2016 ARM Ltd. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This library is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "sun50i-a64-sopine.dtsi" +#include +#include +#include + +/ { + model = "PinePhone Don't be evil development kit"; + compatible = "pine64,sopine-baseboard", "pine64,sopine", + "allwinner,sun50i-a64"; + + aliases { + ethernet0 = &emac; + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + i2c-csi { + compatible = "i2c-gpio"; + sda-gpios = <&pio 4 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; /* CSI-SDA: PE13 */ + scl-gpios = <&pio 4 12 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; /* CSI-SCK: PE12 */ + i2c-gpio,delay-us = <5>; + #address-cells = <1>; + #size-cells = <0>; + + ov5640: camera@3c { + compatible = "ovti,ov5640"; + reg = <0x3c>; + pinctrl-names = "default"; + pinctrl-0 = <&csi_mclk_pin>; + clocks = <&ccu CLK_CSI_MCLK>; + clock-names = "xclk"; + + AVDD-supply = <®_dldo3>; + DOVDD-supply = <®_aldo1>; + DVDD-supply = <®_eldo3>; + reset-gpios = <&pio 3 3 GPIO_ACTIVE_LOW>; /* CSI-RST-R: PD3 */ + powerdown-gpios = <&pio 2 0 GPIO_ACTIVE_HIGH>; /* CSI-STBY-R: PC0 */ + + flash-leds = <&sgm3140_flash>; + + port { + ov5640_ep: endpoint { + remote-endpoint = <&csi_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; + }; + }; + + + hdmi-connector { + compatible = "hdmi-connector"; + type = "a"; + + port { + hdmi_con_in: endpoint { + remote-endpoint = <&hdmi_out_con>; + }; + }; + }; + + reg_vcc1v8: vcc1v8 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>; + brightness-levels = <0 1 2 4 8 16 32 64 128 512>; + default-brightness-level = <2>; + enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* LCD-BL-EN: PH10 */ + }; + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&pio 3 2 GPIO_ACTIVE_HIGH>; /* PD2 */ + }; + + leds { + compatible = "gpio-leds"; + + red { + gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */ + }; + green { + gpios = <&r_pio 0 9 GPIO_ACTIVE_LOW>; /* PL9 */ + }; + blue { + gpios = <&r_pio 0 11 GPIO_ACTIVE_LOW>; /* PL11 */ + }; + }; + + speaker_amp: audio-amplifier { + compatible = "simple-audio-amplifier"; + enable-gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PA-SHDN: PC7 */ + sound-name-prefix = "Speaker Amp"; + }; + + sgm3140 { + compatible = "sgmicro,sgm3140"; + flash-gpios = <&pio 3 7 GPIO_ACTIVE_HIGH>; /* FLASH_TRIGOUT: PD7 */ + enable-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* FLASH_EN: PB3 */ + + sgm3140_flash: led { + function = LED_FUNCTION_FLASH; + color = ; + }; + }; +}; + +&ac_power_supply { + status = "okay"; +}; + +&battery_power_supply { + status = "okay"; +}; + +&codec { + status = "okay"; +}; + +&codec_analog { + status = "okay"; +}; + +&csi { + status = "okay"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + csi_ep: endpoint { + remote-endpoint = <&ov5640_ep>; + bus-width = <8>; + hsync-active = <1>; /* Active high */ + vsync-active = <0>; /* Active low */ + data-active = <1>; /* Active high */ + pclk-sample = <1>; /* Rising */ + }; + }; +}; + +&dai { + status = "okay"; +}; + +&de { + status = "okay"; +}; + +&dphy { + status = "okay"; +}; + +®_ldo_io0 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-ctp"; + status = "okay"; +}; + +&dsi { + vcc-dsi-supply = <®_dldo1>; /* VCC3V3-DSI */ + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + panel@0 { + compatible = "pinephone,jd9365da"; + reg = <0>; + avdd-supply = <®_dc1sw>; /* VCC-LCD */ + dvdd-supply = <®_dldo2>; /* VCC-MIPI */ + cvdd-supply = <®_ldo_io0>; /* VCC-CTP: GPIO0-LDO */ + reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* LCD-RST: PD24 */ + backlight = <&backlight>; + }; +}; + +&r_pwm { + pinctrl-names = "default"; + pinctrl-0 = <&r_pwm_pin>; + status = "okay"; +}; + +&ehci0 { + status = "okay"; +}; + +&ehci1 { + status = "okay"; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + phy-mode = "rgmii"; + phy-handle = <&ext_rgmii_phy>; + phy-supply = <®_dc1sw>; + status = "okay"; +}; + +&hdmi { + hvcc-supply = <®_dldo1>; + status = "disabled"; +}; + +&hdmi_out { + hdmi_out_con: endpoint { + remote-endpoint = <&hdmi_con_in>; + }; +}; + + + +&i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + touchscreen: ft6236@38 { + compatible = "focaltech,ft6236", "edt,edt-6236"; + reg = <0x38>; + + pinctrl-names = "default"; + pinctrl-0 = <&touch_intr_pin>; + + interrupt-parent = <&pio>; + interrupts = <7 4 IRQ_TYPE_EDGE_FALLING>; + irq-gpios = <&pio 7 4 GPIO_ACTIVE_LOW>; + + vdd-supply = <®_ldo_io0>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1440>; + }; +}; + +&pio { + touch_intr_pin: touch_intr_pin { + pins = "PH4"; + // TODO: perhaps remove this bias + bias-pull-up; + function = "irq"; + }; +}; + + +&i2c1 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; + status = "okay"; + + mpu6050@68 { + compatible = "invensense,mpu6050"; + reg = <0x68>; + interrupt-parent = <&pio>; + interrupts = <7 5 IRQ_TYPE_EDGE_FALLING>; /* PH5 */ + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "1"; + }; + + lis3mdl@1e { + compatible = "st,lis3mdl-magn"; + reg = <0x1e>; + interrupt-parent = <&pio>; + interrupts = <1 1 IRQ_TYPE_EDGE_RISING>; /* PB1 */ + }; + + stk3335@47 { + compatible = "sensortek,stk3335"; + reg = <0x47>; + interrupt-parent = <&pio>; + interrupts = <1 0 IRQ_TYPE_EDGE_FALLING>; /* PB0 */ + }; +}; + +&lradc { + vref-supply = <®_aldo3>; + status = "okay"; + + button@191 { + label = "Volume Up"; + linux,code = ; + channel = <0>; + voltage = <357142>; + }; + + button@392 { + label = "Volume Down"; + linux,code = ; + channel = <0>; + voltage = <750000>; + }; +}; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dldo4>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8723bs: wifi@1 { + reg = <1>; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_vcc1v8>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + mmc-hs200-1_8v; + status = "okay"; +}; + +&ohci0 { + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +®_dc1sw { + regulator-name = "vcc-lcd"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-hdmi"; +}; + +®_dldo2 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-mipi"; +}; + +®_dldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi"; +}; + +&simplefb_hdmi { + vcc-hdmi-supply = <®_dldo1>; +}; + +&sound { + simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; + simple-audio-card,widgets = "Microphone", "Microphone", + "Headphone", "Headphone Jack", + "Speaker", "Earpiece Speaker"; + simple-audio-card,routing = + "Earpiece Speaker", "EARPIECE", + "Headphone Jack", "Speaker Amp OUTL", + "Speaker Amp INL", "HP", + "Left DAC", "DAC Left", + "Right DAC", "DAC Right", + "ADC Left", "Left ADC", + "ADC Right", "Right ADC", + "Microphone", "HBIAS", + "MIC2", "Microphone"; + status = "okay"; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>, <&uart1_rts_cts_pins>; + status = "okay"; + + bluetooth { + compatible = "realtek,rtl8723bs-bt"; + enable-gpios = <&r_pio 0 4 GPIO_ACTIVE_HIGH>; /* PL4 */ + device-wake-gpios = <&r_pio 0 5 GPIO_ACTIVE_HIGH>; /* PL5 */ + host-wake-gpios = <&r_pio 0 6 GPIO_ACTIVE_HIGH>; /* PL6 */ + firmware-postfix = "pine64"; + }; +}; + +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&tcon1 { + status = "disabled"; +}; + +&hdmi_phy { + status = "disabled"; +}; -- 2.31.1