We did set these variables, so it is possible to flash boot and root
partitions separately for booting with stock partition table. This
is useful for U-Boot as secondary bootloader. But it's not good for
U-Boot as primary bootloader because the resulting images have boot
and root partitions separated, so users have to create partitions
themselves and this is very confusing.
I'm suggesting to disable it in favor of doing U-Boot as primary
bootloader, this may be harder for users, but it needs to be done
only once, and this way is more fancy and is supported on more
devices than secondary bootloader.
If someone still wants to use this port with U-Boot as secondary
bootloader they can do "pmbootstrap install --split" and
"pmbootstrap export" to get 2 separate partitions to flash.
[ci:skip-build]: Already built successfully in CI.
bcm4330 has 2 wifi sdio firmwares, one with IEEE 802.11а support
and one without. One without was missing which caused some
devices to have wireless network issues.
Additionally Oyua specific bluetooth firmware was found and it
is included as well.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
[ci:skip-build]: Already built successfully in CI.
Fixes#2349. Patches refreshed because some didn't apply when I built
directly from local repo and tried to import them with "git am".
Known issue: NetworkManager fails to assign IP to usb0, I had to
assign it manually to use USB networking.
In the mainline ds2482 onewire kernel driver, active_pullup defaults to
1 which is setting the APU register. This caused the connection to the
ds2784_battery slave to be unstable and flaky. In the AOSP manta project
this flag is set to 0 as well.
This is a device-specific package. The only device that depends on
this, device-nokia-n900, is in community, so let's move it there too.
[ci:skip-build]: already built successfully in CI
This is a device-specific package. No need to keep it in main where it
gets included in stable releases unnecessarily. The only device that
depends on this, device-inet-a33, is in testing, so let's move it there
too.
Also start squashing the .mdt files into .mbn and provide compatibility
symlinks so old kernels that look for .mdt still find it.
Also move the zap firmware into a device-specific subdirectory.
Symlinks for venus are skipped since that one's not used in any
production branch yet for sm7225.
[ci:skip-build]: Already built successfully in CI.
Dependencies:
- Add dependency "xfce4-screensaver" to provide virtual keyboard at screen
unlock. As a dependency because several settings need to be implemented to
integrate it well in LXQt.
- Add dependency "setxkbmap" to make keyboard layout settings work
- Add dependency "upower" to make battery icon in panel work
Recommends:
- Add recommend "pulseaudio" to make sound work
- Add recommend "adwaita-icon-theme" because that's used by xfce4-screensaver
- Remove recommend "pavucontrol" because there is already "pavucontrol-qt"
Sources:
- Add autostart desktop file for xfce4-screensaver
- Add autostart desktop file to override lxqt-xscreensaver-autostart
- Modify autostart desktop file for onboard, a startup delay mitigates
an issue with the onboard panel icon not showing up at the first boot
- Modify lxqt-tablet.sh to include custom XDG_DATA_DIRS
- Add application desktop file to override xfce4-screensaver-preferences,
adding it to the menu
- Add application desktop file to override xscreensaver-settings, removing it
from the menu
- Change install location of "lxqt-tablet" repository configs from
/etc/skel/.config to /etc/xdg/lxqt-tablet. That way they are handled as
distribution-specific configs and are separated from the user configs in
~/.config.
- Upgrade to version 0.3 of "lxqt-tablet" repository:
- Change theme to "Dark" to fix panel look
- Increase panel size
- Change wallpaper mode to "zoom" to avoid deforming the picture
- Disable global single click to not interfere with PCManFM
- Add terminal and file manager launchers to panel
- Rename openbox xml file to apply the configs
- Set lock command to xfce4-screensaver
- Add xfconf files to configure xfce4-screensaver
- Clean up configs by removing default values
[ci:skip-build]: Already built successfully in CI.
These cmdline params are not needed because the issues they worked
around were fixed in 6.7 or in this kernel branch we are using.
Additional modules are included in the initramfs since they may not be
builtin in the future, and not having them loaded in the initfs can break booting
kconfig changes:
- Most are due to running 'pmb kconfig migrate'
- Enable USB_F_FS
- Build ath11k as a module + enable debug, to help with debugging
pma#2361
- Enable support for BT BR/EDR stuff (like HFP)
- Enable CRYPTO_MD4 for EAP_MSCHAPv2
This uses oem-specific packages for configuring Intel and AMD systems,
and installs them all by default for new images using pmbootstrap's
pmb_recommends feature.
The intention is to provide pre-built images with support for Intel and
AMD already enabled/configured, and users can remove an unwanted set of
packages (e.g., `apk del device-generic-x86_64-intel` when on an AMD
system) if they want to.
Upgrading existing systems should work, in that I haven't observed any
apk conflicts with it. But you do need to manually install the new
oem-specific package if you need it (e.g. `oem-intel`)
fixes https://gitlab.com/postmarketOS/pmaports/-/issues/2484
The panel driver has been renmaed in the kernel sources to be in line
with what's going to be upstreamed.
[ci:skip-build]: Already built successfully in CI.
Currently, when postmarketOS fails to boot up, retrieving any
information necessary to root cause the issue is non-trivial, requiring
building a custom initramfs with debug-shell enabled and then manually
copying out data.
Let's improve the situation by exporting logs automatically on boot
failure. This is safer than just exposing a root shell but still
provides a whole lot of useful info that should make duplicating and
triaging issues much easier for developers.
This commit implements the functionality and includes some generally
useful data. We then generate a README and expose files for each command/log
as well as an archive that can be easily attached to a GitLab issue.
To help with triaging, also record the version of the postmarketos-initramfs
package and hash the init.sh and init_functions.sh files.
For testing purposes, you can trigger the log recovery mode on-time by
creating an empty file named ".pmos_export_logs" in the /boot partition.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Always write logs to the ramdisk, adjust setup_log() to spawn "tail" to
pipe the log to the console device when PMOS_NO_OUTPUT_REDIRECT is set.
This is necessary to ensure that the initramfs logs can be extracted on
a failed boot.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
In preparation of new sdm660-mainline kernel release all
downstream ports will become irrelevant.
If needed, downstream port can still be chosen as
'xiaomi-lavender-downstream' during pmbootstrap init.
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
[ci:skip-build]: already built successfully in CI
non-free firmware not (yet?) submitted to linux-firmware, this is pulled
directly from the latest versions distributed by lenovo, instead of some
probably outdated repo distributed by random folks.
The bt firmware here fixes an issue where the bt range on the 21bx is
extremely poor (like ~1 meter or less)
linux3.4-ARM-8933-1-replace-Sun-Solaris-style-flag-on-section-xz-supplementation.patch
contains an addition that was not part of
linux3.4-ARM-8933-1-replace-Sun-Solaris-style-flag-on-section.patch
simply because error did not occur with the config I tested with.
[ci:skip-build]: already built successfully in CI