This switches from 6.1 LTS to 6.6 LTS.
Unfortunately, this version has regressions related to SPI (breaks keyboard)
and DRM (breaks display). Thus adding patches to revert these regressions.
Hopefully, these will be properly fixed until the next LTS release.
This also makes it pass community kconfig check again.
[ci:skip-build]: already built successfully in CI
- Fixes FDE unlocking on devices with usb keyboards
- Also drops the i915 module from the initfs, this is specified by the
oem-intel package now
[ci:skip-build] already built successfully in CI
On HTC devices with S-On still active, the 'userdata' partition
is not writable. Change the default rootfs partition to the
'system' partition, which is writable.
Now as boot-deploy allows us to generate both boot.img and extlinux.conf
at the same time, enable generating the config for all msm8916 since it
will be used in the future lk2nd release. boot.img is still kept to keep
compatibility with current lk2nd releases and to allow system recovery
with fastboot when required.
[ci:skip-build] already built successfully in CI
[ci:ignore-count]
* Depend on the common soc-qcom-sm7150 package
* Set console=null in cmdline
* Add touchscreen firmware to initramfs
* Add required modules for touchscreen to modules-initfs
* Panel output works, drop phoc.ini
* Switch maintainer and co-maintainer
* Bump pkgrel to 1.2
Signed-off-by: Jens Reidel <adrian@travitia.xyz>
hwclock default configuration is to use the S3C RTC, which is mapped to
/dev/rtc0. However, reading from this clock fails with the following
kernel message:
"s3c-rtc 101e0000.rtc: hctosys: unable to read the hardware clock"
and the time as boot is then always set to 1/1/1970.
This commit change the default RTC to the MAX77686 one (mapped to
/dev/rtc1), that does not suffer from this issue.
Signed-off-by: Alexandre Marquet <tb@a-marquet.fr>
The adjustments made by this script are unnecessary now that the device
runs a mainline kernel, and more importantly the brcmfmac driver (as
opposed to the bcmdhd driver used in the vendor kernel).
Signed-off-by: Alexandre Marquet <tb@a-marquet.fr>
With the pmbootstrap change let's change the deviceinfo variable names
to the non-deprecated version.
[ci:ignore-count]
[ci:skip-build]: already built successfully in CI
This commit also removes librecomputer-solitude/alta device tree patches
as they're now upstream.
Signed-off-by: Ferass El Hafidi <vitali64pmemail@protonmail.com>
[ci:skip-build]: already built successfully in CI
This device has no maintainers specified, and, though I did not port this
device, I have one and I maintain linux-postmarketos-exynos5, so it is
probably okay for me to take maintainership of it.
As for several other exynos devices we need to disable the
video4linux's udev rule OR disable FIMC IS and patch kernel to fix
build error without FIMC IS.
Add dependency on postmarketos-base-downstream-disable-udev-v4l to
override the v4l rule with symlink to /dev/null. We can then drop
FIMC IS patch and keep kernel config more similar to original one.
As for several other exynos devices we need to disable the
video4linux's udev rule OR disable FIMC IS and patch kernel to fix
build error without FIMC IS.
Add dependency on postmarketos-base-downstream-disable-udev-v4l to
override the v4l rule with symlink to /dev/null. We can then drop
FIMC IS patch and keep kernel config more similar to original one.
We want both klimtwifi and klimtlte to be able to depend on
firmware-samsung-klimt, for both their downstream and mainline kernel
variants.
Previously we used install_if like:
install_if="device-samsung-klimtlte-kernel-mainline" which will only
work for klimtlte and not klimtwifi. Instead we add two nonfree
subpackages to the device packages that install_if's depending on
kernel choice.
We want both chagallwifi and chagalllte to be able to depend on
firmware-samsung-chagall, for both their downstream and mainline
kernel variants.
Previously we used install_if like:
install_if="device-samsung-chagallwifi-kernel-mainline"
which will only work for chagallwifi and not chagalllte. Instead we
add two nonfree subpackages to the device packages that install_if's
depending on kernel choice.
Provides firmware files that are common for all Samsung devices based
on Exynos 5420 when using Samsung's vendor kernel.
For now the package contains mfc, sound and bluetooth firmware. Sound
and bluetooth do not work at the moment, but lets package the required
files anyways.
Postmarketos-base-downstream-disable-udev-v4l symlinks
/lib/udev/rules.d/60-persistent-v4l.rules to /dev/null, so depend on
this package instead. The dependency is added to downstream kernel
subpackage, as issue *should* only affect downstream kernel.
[ci:ignore-count]: many device packages updated at the same time
[ci:skip-build]: already built successfully in CI
Postmarketos-base-downstream-disable-udev-v4l symlinks
/lib/udev/rules.d/60-persistent-v4l.rules to /dev/null, so depend on
this package instead. The dependency is added to downstream kernel
subpackage, as issue *should* only affect downstream kernel.
Postmarketos-base-downstream-disable-udev-v4l symlinks
/lib/udev/rules.d/60-persistent-v4l.rules to /dev/null, so depend on
this package instead. The dependency is added to downstream kernel
subpackage, as issue *should* only affect downstream kernel.
Since audio over DisplayPort (over USB-C) is supported in the kernel,
add a UCM config to complete support.
To be clear, this might not work out of the box yet, I hope it'll start
working better when another audio route (speaker or microphone) is
working from kernel side.
[ci:skip-build]: Already built successfully in CI.
Since the GPU is supported since a while enable
deviceinfo_gpu_accelerated to let pmbootstrap show UIs like phosh.
Also with modem working with patched tqftpserv, we need the
msm-modem-uim-selection dependency, so add that as well.
In mainline Linux these paths will be used, move the firmware packaging
there. By doing this we drop downstream support. Support could be
restored by adding some symlinks in a downstream-specific package if
required.
We also start squashing the firmware into .mbn format with pil-squasher.
For now we keep the files in _wififiles in their old location, I'm not
sure yet where they need to go since I didn't have wcnss working on
mainline yet.
Required for getting mobile data up, otherwise ModemManager fails to
connect with:
Status | connected: no
| connection error name: org.freedesktop.ModemManager1.Error.MobileEquipment.Unknown
| connection error message: failed to create net link for device: failed to add link for device: Could not allocate link: Failed to add link with mux id 1: Netlink message with transaction 27 failed
Previously, the modem firmware would be loaded from the modem partition
using this firmware loader. As of the 6.5.4 SDM670 kernel upgrade, the
firmware is installed and loaded from the firmware package. Drop the
dependency on the msm-firmware-loader, which is now unused.
