* Added a ui package for i3wm
* Added n900 specific i3wm config
* Fixed mixed tabs and spaces in i3status.
This is also the first commit made on an n900
running postmarketOS.
* Removed redundant X11
* Use lock.sh to lock the device
* Windows management improvements
* bump pkgver
* Fix device-nokia-n900 checksums
* Fixed path in the i3wm split package
* New "pmbootstrap build --src=/local/source/path hello-world" syntax
* The local source path gets mounted inside the chroot
* From there, a copy of the source code gets created with rsync (so
we can write into the source folder if necessary, for better
compatibility with all kinds of APKBUILDs)
* After the aport gets copied into the chroot before building (as
usually), we extend the APKBUILD with overrides to make it use
mountpoint's source instead of downloading the package's source
from the web as usually
* The package built with the local source gets _pYYYYMMDDHHMMSS
appended to the pkgver
* linux-postmarketos-mainline: use $builddir, fix patch checksum
Binary packages are rebuilding. If your kernel is not rebuilt yet, and
you don't want to build it yourself, just checkout the previous
pmbootstrap commit.
This commit also changes the arch from the postmarketOS kernels from
"all" to the ones where we actually have a kernel config.
Fixes#1229.
We have two methods of cross-compiling:
* native: everything runs with the host architecture, QEMU is not
involved. This is the fastest, but requires the build system to be
working with it. We use this for all linux-* packages currently.
* distcc: everything runs through QEMU emulating the target arch,
*except* for the compiler. This is the most compatible approach
working with all packages.
When compiling `linux-*` packages natively, kernel scripts needed
during the build process get generated. Some of these are C files that
get compiled as executables. In native mode, these get compied to the
native architecture, in distcc mode to the target architecture.
The problem is, that we need these scripts compiled for the target
architecture in the kernel's dev package in order to compile kernel
modules outside of the kernel's package (e.g. wireguard).
It is not possible to just rewrite this logic to generate target-arch
binaries when running in native mode, because these binaries require
musl-dev, linux-headers and some other packages to be installed for the
target architecture inside the native chroot.
We solve this by introducing a new `kernel-scripts` package. which
contains just the binary scripts. In case the dev package was
cross-compiled, it depends on `kernel-scripts` and symlinks these
binaries. The `kernel-scripts` package always gets compiled in distcc
mode since it does not have a `linux-` prefix.
Fixes#1230.
Fixes#1227.
This also updates the hash in linux-postmarketos-mainline, because the
hash changed upstream (they updated their git version server-side?).
This port includes:
* Weston including touch and WiFi (using e.g. firmware-samsung-i9305) works.
* Touchscreen calibration for osk-sdl
* Sound configuration
* Udev rules for touch and pen, pen works!
Closes#441. Adjust bootimg_analyze code:
* Install mkbootimg (which now provides unpackbootimg) instead of
unpackbootimg. In theory, pmbootstrap should recognize this
automatically, however right now it does not yet handle this case.
* The file names of the extracted files have changed.
* Automatically generate a calibration matrix for libinput
This takes the calibration matrix for wayland and divides the pixel
offsets by the device width/height.
* Bump pkgrels of devices using devicepkg-dev
This causes new packages to be generated, using the new devicepkg-dev
version.
The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm
Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches
are needed for successful compilation. The screen dimension is 720x1280.
The touchscreen device name is ft5x06_i2c. Use this name for udev
instead of hardcoded device path. Also add a workaround for red
screen weston by setting weston_pixman to 2
The screen doesn't refresh. Enabling msm-fb-refresher as suggested.
Add udev rule to indicate whether the device is in charging state.
Green led indicates that the device is charging, whereas red light
indicates that the device is discharging.
For prima wlan module to work, an initialization procedure is needed (
echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module
(wlan.ko). Also build the prima wlan as module.
Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware
to run. Add the required wifi firmware to enable the wifi interface.
Add an openrc service to load wlan module after wcnss_service is
initialized.
* Testsuite: Run UIs in Qemu and check running processes (and other changes)
* When `pmbootstrap qemu` gets killed, it now takes down the Qemu process with it
* `test/check_checksums.py` got a new optional `--build` parameter, which makes
it build all changed packages instead of just checking the checksums
* We run this before running the testsuite now, so all changed packages get
built before running tests (otherwise tests would hang without any output
while a changed package is building)
* New testcase, that zaps all chroots, installs a specific UI (xfce4 and
plasma-mobile currently, easy to extend), runs it via Qemu and checks the
running processes via SSH.
* Version checking testcase: rewritten to include Alpine's testsuite file in
our source tree, so we don't need to clone their git repo anymore. Now it
is enabled for Travis.
* All this gives us a nice 10% code coverage boost
* Increased the `hello-world` pkgrel to verify that the Travis job is working.
* Various fixes
* Build device-packages for the device arch and don't raise an
exception, but print a note if --ignore-depends is not specified
and therefore the kernel gets installed, too.
* Don't use --force when building in Travis (because abuild doesn't
check the checksums then. Bug report on the way.)
* Don't run the building process in the background, but wait for its
completion
* Exit with 1 when showing usage in check_checksums.py
It used to have an entry for /mnt/pmbootstrap-packages, which only
makes sense while working on the chroot with pmbootstrap. After the
installation on the device, there's no repo in that path.
Furthermore, empty lines were added to the recovery installer script
for readability (thanks @ata2001!)
* Fail if mkbootimg/uboot-tools are not installed, but creating a
boot.img file / u-boot legacy image was requested via deviceinfo
(fixes#312)
* Fail if /boot/dt.img is missing, but we have a qcdt device
* Fail if the dtb file specified in deviceinfo does not exist
* Fail if mkbootimg etc. exit with error code
* Don't try to add the ext4 module into the initramfs. We always
compile it into the kernel. Instead, kconfig_check makes sure it
is enabled now. (fixes#1037)
* Add a note that modprobe warnings can be ignored mostly
Current status:
- flashing only manually (intel phones have different bootimg format)
- usb networking works
- xorg works using fbdev
- packages needed for wayland are not available for x86
- touch works in xorg and osk-sdl
Example: Building gcc-armhf for armhf does not make sense, so this
commit changes arch="all" to arch="aarch64 x86_64". This helps to
simplify the repository scripts (#970).
