Commit graph

22 commits

Author SHA1 Message Date
Minecrell
e302eff0bc
device/device-*: remove empty touchscreen(_calibration) / dev_keyboard (!1036)
Most devices do not need to set any of these variables.
directfb can now automatically detect touchscreens, calibration is
only needed for resistive touchscreens and dev_keyboard is unused.

Automatically done using:
  - sed -i '/deviceinfo_dev_keyboard=""/d' device-*/deviceinfo
  - sed -i '/deviceinfo_dev_touchscreen=""/d' device-*/deviceinfo
  - sed -i '/deviceinfo_dev_touchscreen_calibration=""/d' device-*/deviceinfo
2020-03-09 10:06:00 +01:00
David Heidelberg
9d2b37dc34
device/device-asus-grouper: switch from tilapia back to grouper (!1025)
Signed-off-by: David Heidelberg <david@ixit.cz>
2020-03-05 19:19:22 +03:00
David Heidelberg
6ed77fd5fd
asus-grouper: bump to mainline + firmware adaptation (!933)
- use mesa-git (until we have functional mesa-grate-git)

Works:
- USB
- WiFi (tested with IWD) + Bluetooth
- Touchscreen
- Phosh rotation (rootston.ini)
- IIO Light sensor
- NFC

Not works:
- 3D
- GPS
- GSM (tilapia)
- Camera

Signed-off-by: David Heidelberg <david@ixit.cz>

[ci:skip-build]: already built successfully in CI
2020-02-15 23:09:26 +01:00
Bart Ribbers
71557f7f0c
device-*: rebuild for the new splash screen generation 2020-01-28 15:40:18 +01:00
Pedro Ângelo
9c2ce7b1a1
asus-grouper: update kernel wifi firmware path (!252)
[ci:skip-build]: already built successfully in CI
2019-03-05 09:34:26 +01:00
Pedro Ângelo
454b28e421 asus-grouper: create nonfree firmware subpackage (!252)
With this firmware I can connect to my AP using wpa_supplicant, ping
servers and fetch files normally. However the driver also brings up the
p2p0 interface on boot and it seems to conflict with wlan0. So to test
the wireless we need to disable p2p0 and stop the wpa_supplicant service
(because it attaches itself to p2p0 on boot):

$ sudo ip link set p2p0 down
$ sudo rc-service wpa_supplicant stop
$ wpa_passphrase <your ESSID> <your password> > ./wpa_config
$ sudo wpa_supplicant -B -Dnl80211 -iwlan0 -c./wpa_config
$ sudo udhcpc -i wlan0
$ ping postmarketos.org
PING postmarketos.org (188.166.143.8): 56 data bytes
64 bytes from 188.166.143.8: seq=0 ttl=42 time=41.604 ms
64 bytes from 188.166.143.8: seq=1 ttl=42 time=56.022 ms
64 bytes from 188.166.143.8: seq=2 ttl=42 time=54.911 ms
64 bytes from 188.166.143.8: seq=3 ttl=42 time=54.241 ms
...
$ sudo apk update
fetch http://postmarketos.brixit.nl/armhf/APKINDEX.tar.gz
fetch http://dl-cdn.alpinelinux.org/alpine/edge/main/armhf/APKINDEX.tar.gz
fetch http://dl-cdn.alpinelinux.org/alpine/edge/community/armhf/APKINDEX.tar.gz
fetch http://dl-cdn.alpinelinux.org/alpine/edge/testing/armhf/APKINDEX.tar.gz
v20190228-49-gbc0f9441b0 [http://dl-cdn.alpinelinux.org/alpine/edge/main]
v20190228-41-g6ee930cc6c [http://dl-cdn.alpinelinux.org/alpine/edge/community]
v20190228-48-g67283cdbf6 [http://dl-cdn.alpinelinux.org/alpine/edge/testing]
OK: 13694 distinct packages available
2019-03-05 09:32:50 +01:00
Pedro Ângelo
81cee38610
asus-grouper: modernize device package (!253)
Updated the device-asus-grouper package to use devicepkg-dev.

I've tested the resulting image and it builds, boots and has a working
touchscreen (in Weston)

I've also noticed that the device reboots itself at times, both in the
USB ssh console and in Weston. This seems to be a known issue but I
don't know how prevalent it was before.
2019-03-04 09:47:49 +01:00
Marijn rom
7f69748faf
asus-grouper: add mdss-fb-init-hack (!170)
mdss-fb-init-hack fixes the black screen (e.g. in XFCE4)
2019-01-23 09:43:51 +01:00
Luca Weiss
bbec7c41ea
Add deviceinfo_codename variable (!114)
For postmarketOS/pmaports#157 [skip ci]
2018-12-26 21:49:10 +01:00
Oliver Smith
9814d78e73
device-*: don't use noarch anymore
Use the device's architecture instead of noarch. Because the device
packages should never be built for other architectures, even if all
depends can be built for other arches as well.

This simplifies package building as part of the new build
infrastructure effort.

pmbootstrap has also been changed to output this by default in
aportgen.
2018-11-27 07:47:11 +01:00
Oliver Smith
5f01e6c68b deviceinfo: prepend manufacturer to device name 2018-08-23 00:44:46 +00:00
Oliver Smith
a31244d28a Remove github.com references
* Travis and Coveralls badges
* aports: instead of <https://github.com/postmarketOS>, use
  <https://postmarketos.org>
* References to full URLs to issues and pull requests replaced with
  a hash and the number
* grsec check: simplify error message, remove link to github issue
  (nobody is using that anymore anyway)
2018-06-30 09:00:48 +02:00
Ricardo Rodrigues
317db382fc asus-grouper: fastboot max size is 650 (#1535) 2018-06-04 19:09:41 +00:00
Daniele Debernardi
d3b439ae2d deviceinfo: remove external_disk_install and external_disk, use external_storage instead (#1301)
* deviceinfo: remove external_disk_install and external_disk, use external_storage instead
* Complain when external_disk* is used
2018-03-07 22:35:02 +00:00
Oliver Smith
e654a995e6 device packages: depend on postmarketos-base (#1258)
* device-*: add postmarketos-base to depends
* aportgen: add postmarketos-base to depends
* Add test case
* postmarketos-base: Don't depend on devicepkg
* msm-fb-refresher: Enable service in post-install
2018-02-25 18:40:54 +00:00
Oliver Smith
1901060d4d Let new and most old devices depend on mesa dri swrast (#1086)
* Devices: depend on mesa-dri-swrast (where it makes sense)
* Device wizard: add mesa-dri-swrast by default
* Closes #1013.
2018-01-06 14:08:10 +00:00
Attila Szöllősi
2f9ef89189 Rename deviceinfo variable flash_methods to flash_method (#1030)
* Rename deviceinfo variable flash_methods to flash_method
* Update pmb.config.deviceinfo_attributes / add sanity check
* Add test case that parses all deviceinfo files
2017-12-21 22:12:51 +00:00
clayton craft
dc0121d4ec [grouper] Add osk-sdl config for device (#670) 2017-11-18 17:42:37 +00:00
clayton craft
fdff56f4ec Fix #499: Don't generate weston.ini from the deviceinfo anymore (#739)
@drebrez deserves much credit for this one for all the testing,
bisecting and for fixing everything. Thank you very much!
---
* devices which need a custom weston.ini ship it with a install_if
  subpackage, so it only gets installed when weston is installed. This
  sounds complicated, but is actually pretty clean in the APKBUILD.
* postmarketos-ui-weston: has a weston.ini.default, which enables
  xwayland and uses fbdev as backend (because that's what most
  devices use!). It defaults to the weston.ini.default if there is no
  weston.ini (as installed by the device package).
* changed spaces to tabs for consistency, general minor refactoring of
  device-APKBUILDs
2017-10-20 00:07:00 +00:00
Pablo Castellano
dbbdf7cfa4 Fix #436: Clean apkbuilds (#692)
* Remove empty build() functions
* Remove obsolete '|| return 1' statements
2017-10-04 15:05:00 +00:00
drebrez
e303ea7cf0 Set framebuffer mode in initramfs for all devices (#652) 2017-09-29 15:22:20 +00:00
Oliver Smith
3e140ea690 Close #194: Aports subfolders! See migration guide in the wiki (#227)
Migration guide:
https://github.com/postmarketOS/pmbootstrap/wiki/Migration-to-aports-subfolders
2017-07-28 22:34:40 +00:00
Renamed from device-asus-grouper/APKBUILD (Browse further)