I'm not able to give this device the attention it deserves.
This also removes me from maintaining fw and kernel packages used by the
L5, and adds the current L5 maintainers to those packages.
[ci:skip-vercheck]
[ci:skip-build]: already built successfully in CI
Depend on msm-firmware-loader, firmware- and soc- packages.
Sort deps alphabetically.
Tidy up deviceinfo:
* add flash_kernel_on_update
* remove unneded things from kernel cmdline
[ci:skip-build]: already built successfully in CI
Currently it requries the check_code result check in the
vendor uboot to be disabled as explained in the wiki.
Booting directly via reconfigured boot order still
does not work. It hangs somewhere in the kernel.
Firmware for Wifi/BT is not included yet.
It could use the linux-postmarketos-omap kernel in the future,
but there are still some dirty things in there e.g. for sound
which are not suitable for a multi-device kernel.
[ci:skip-build]: already built successfully in CI
Bump to the 6.6.32 release, including updating the config with the
latest changes from Purism.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[ci:skip-build]: already built successfully in CI
PineTab 2 is a successor to the original PineTab from PINE64 released
in mid-2023.
The tablet came with DanctNIX's fork of Arch Linux ARM, comes with
K Desktop Environment as the UI and available with 64GB eMMC/4GB RAM
or 128GB eMMC/8GB RAM.
Changelog since 6.7:
General:
* Adreno 5xx preemtion is now disabled due to hangs it causes.
This makes GPU a lot more cooperative on these platforms.
* Fixed absence of zap-shader region which caused devices with
GPU enabled to freeze the whole system.
* Fixed ath10k Wi-Fi not connecting to 5Ghz networks.
* Incorporated in-kernel pd-mapper patchset, therefore userspace
pd-mapper daemon is not required.
* Kernel cmdline from bootloader is no longer ignored completely,
in other words, not hardcoded. You can now modify cmdline in
deviceinfo file and changes in that file will not be ignored.
Devices:
* Xiaomi Redmi Note 7 (lavender):
* split device trees into 2 variants by panel type (Tianma & BOE)
* GPU + panel support for 2 variants
* Vibrator support
* Connectivity: modem, Wi-Fi and bluetooth support.
* Other/all devices:
* update device trees according to upstream USB stack changes
(related to USB 3 phy support)
Install script into /etc/profile.d with workaround for mesa bugs.
This makes most SDM660 devices usable for general people out of the box.
Signed-off-by: Alexey Minnekhanov <alexeymin@postmarketos.org>
Add msm-firmware-loader, soc-qcom-sdm660-rproc, firmware-xiaomi-lavender
and firmware-qcom-adreno-a530 as dependency. This is necessary to make
Wi-Fi and modem work.
Add support for panel drivers.
commit 933f2b5703 ("device-nokia-n900: improve sxmo-dwm support [MR 5227]")
accidentally removed sxmo lock state initialization. Restore the lock state
initialization
Phoc now defaults to 1,25 as scale on skomer, which while not perfect,
is good enough and lets the device be unlocked. As such, let's remove
this configuration file and encourage improvements upstream instead.
See https://gitlab.com/postmarketOS/pmaports/-/merge_requests/4541
170189393b (device-nokia-n900: add upower support and config (MR 4397) added
an upower config, but did not provide a subpackage to actually install it on
device. Add the needed subpackage.
[ci:skip-build]: already built successfully in CI
(1) the deviceprofile differs from upstream 1.16.3 in the following respects:
(a) -export SXMO_NO_KEYBOARD=1 - allow use of the virtual keyboard
(b) +export SXMO_DMENU_LANDSCAPE_LINES="10"
+export SXMO_DMENU_PORTRAIT_LINES="6" - these two adjust the size of the
displayed dmenu menu.
* NB: All foregoing changes are already merged in sxmo-utils master.
(c) +export SXMO_TOUCHSCREEN_ID="TSC2005 touchscreen" - allows sxmo to
reliably toggle touch screen's enabled status
* The foregoing change is awaiting acceptance by upstream.
(2) The start hook differs from upstream 1.16.3 by the removal of the line that
starts conky. That program pegs N900 CPU usage at 100% all the time. This
change is not upstreamable, at least not for the time being
At some point the driver started using symlinks w/ machine IDs for
finding/loading fw, and for some reason I thought it was a good idea to
not install those symlinks.
Fixes this failure when loading the brcmfmac driver:
brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43752-sdio.purism,librem5r4.bin failed with error -2
[ci:skip-build]: already built successfully in CI
With the current kernel, ds2482 w1<>i2c module is not automatically
loaded at boot, which prevents loading the ds2784 battery module.
Signed-off-by: Alexandre Marquet <tb@a-marquet.fr>
[ci:skip-build]: already built successfully in CI
This fixes op6 display panel support, drm error spam in dmesg, and
various other minor things.
It also enabled dynamic debugging and ftrace.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
For now, limited support without graphics. Graphics
support would need messing and detecting board variants.
especially since Rev B seems to need a vcom setting per batch.
[ci:skip-build]: already built successfully in CI
Add support for the Xiaomi Miatoll phones. There are currently two
device trees in the upstream kernel.
Signed-off-by: David Wronek <david@mainlining.org>
The original maintainer unfortunately has bricked their phone. Drop the
device package in preparation for the SM7125 kernel upgrade.
Signed-off-by: David Wronek <david@mainlining.org>
