The close-to-mainline kernel removed the generic-dsi driver in favor of
normal panel drivers. Also the panel drivers are now built in. Reflect that.
Also reflect the changes of firmware-motorola-ocean in
device-motorola-ocean_nonfree-firmware.
[ci:skip-build] Already built on CI in MR
Workaround for https://source.puri.sm/Librem5/linux-next/-/issues/303.
It seems worth sacrificing some power savings for a modem that won't
disappear, at least until the above issue is fixed.
[ci:skip-build]: already built successfully in CI
Shellcheck 0.7.2 has a change that gives many error conditions their own
SC30** codes, instead of including them in SC2039. This updates the
scripts in this package that "disable SC2039" to disable the new code.
New codes added in shellcheck: cfd68ee0c2ebfd0ab08a1d4bf628162b454dc207
At the moment, oFono/MM are usually stopped after rmtfs on shutdown.
This does not make sense, since the modem managed by oFono/MM will
disappear once rmtfs is stopped. Add a "before ofono modemmanager"
to make sure that OpenRC will stop oFono/MM before rmtfs on shutdown.
This may or may not fix some occasional hangs during shutdown,
but it definitely makes it possible for oFono/MM to shutdown cleanly.
pmb will suppress firewall-related messages on branches that don't have
these changes
[ci:skip-build] changed kernel packages in this series cause timeout at 3hr
This enables the firewall by default, and could be split off into a
future ui-base package so that the firewall (among other things) are
enabled only when UIs are installed.
Installs nftables config useful for pmOS::
1) drop all connections to wwan* (wildcard matching supported, are there
any other wwan iface names that wouldn't match this?)
2) allow ssh, drop from wwan (kinda redundant w/ the first rule, but
doesn't hurt..), allow DHCP on usb*
3) allow all incoming connections on usb* (with the -openusb subpackage)
4) enable logging all nftable events (with the -log subpackage), very
useful for debugging
fixes#1024
This patch is obsolete now and even breaks the detection
of headphones. Headsets are properly detected at all times.
Dropping this, allows ALSA to see the 'Headphone Jack' event
when headphones are plugged in and removed. This way, ALSA UCM
can act on these jack events as well.
[ci:skip-build] Already built on CI in a MR
Headset jack events emit 2 events: 'Headset Microphone Jack'
and 'Headphone Jack'. These were properly detected before,
but not headphone jack events only: 'Headphone Jack'.
This change allows to detect headphone jack events as well
and act on these events by setting the headphones as
default audio output while keeping the internal
microphone as audio input. For headsets,
the microphone is switched to the headset microphone as well.
- Add SLPI to nonfree_firmware description
- Add touchscreen and fuel gauge modules to the initramfs in preparation for
osk-sdl and charging-sdl (or any new alternative) support
- Add pointercal file for osk-sdl
[ci:skip-vercheck]
If the system time jumps back and forth before installing the package
"swclock-offset", OpenRC can get confused whether the current dependency
tree is old or new. To resolve this confusion, the dependency tree cache
is updated within the post-install script of the openrc subpackage.
This is needed urgently to prevent `make oldconfig` from asking
questions about new options since 5.10 and thus unblock the
broken aarch64 BPO builder.
Set package dependency "swclock-offset" to "soc-qcom-msm8916" and
"soc-qcom-sdm845".
These SoC's have a read-only real-time clock (RTC). The package
"swclock-offset" keeps an offset between the RTC and the system time.
Some devices have a working but non-writable real-time clock (RTC).
This package contains two shell scripts: One writes the offset between
'hwclock' and 'swclock' to a file at shutdown, another one reads the
offset from the file at boot and sets the 'swclock'. This way the system
time in userspace is kept in present time.
[ci:skip-build] already built successfully in CI
Port based on an unofficial LineageOS port
from https://www.los-legacy.de/17.1/zerofltexx, using kernel from
https://github.com/Exynos7420/android_kernel_samsung_exynos7420/
What works:
- Kernel boots
- Display and touch input (tested with Weston)
- USB networking
- Wifi
For now only including Wifi drivers, as I wasn't yet able to
successfully test audio and camera subsystems (but I intentionally left
these firmware files commented out in the APKBUILD file).
[ci:skip-build]: already built successfully in CI
This package sets GDK_BACKEND=wayland (in gtk-app-wayland.sh), and some
apps (firefox) still need that set to work. gsd-xsettings, which is
launched explicitly by Phosh 0.11.0+, does not work when this var is set
to wayland.
To prevent accidental bricks, postmarketos-update-kernel is not
installed by default. If it works for your device and you've added the
deviceinfo variable, you also need to depend on the package for the
updates to actually happen.
[ci:skip-build] already built successfully in CI
