Commit graph

2463 commits

Author SHA1 Message Date
Clayton Craft
bb129dd247
linux-purism-librem5: upgrade to 5.18.11 (MR 3407)
[ci:skip-build]: already built successfully in CI
2022-09-06 08:45:23 +02:00
Newbyte
759ae7dbee
samsung-p4note: fix kernel partition name (MR 3397)
Without this, pmbootstrap flasher flash_kernel fails as it tries to
flash the kernel to a partition called KERNEL, which does not
exist.
2022-09-05 11:25:16 +02:00
Song Fuchang
06e79fb51a
xiaomi-polaris: Make touchscreen work during boot (MR 3399) 2022-09-05 08:51:06 +02:00
Dylan Van Assche
3ec4e103fa
community/linux-pine64-pinephonepro: enable SPI flash (MR 3401)
SPI flash for Tow-Boot was enabled a long time ago, but the config was missing in pmaports.

Enables https://gitlab.com/pine64-org/linux/-/merge_requests/29
[ci:skip-build]: already built successfully in CI
2022-09-05 08:47:34 +02:00
Dylan Van Assche
7d72743b1f
device-odroid-hc2: switch to linux-edge (MR 3378)
ODROID HC2 is based upon the Samsung Exynos 5422 and can run full
mainline. Switch to linux-edge from Alpine to enable this and drop
the close-to-mainline fork for this device. The close-to-mainline
fork was already linux-edge for a while but with a separate KConfig.
These KConfig changes are now integrated in linux-edge of Alpine.

U-boot script was updated to handle vmlinuz-edge as well since
Alpine's linux-edge does not generate a vmlinuz file, but vmlinuz-edge.
Probably to allow installing linux-lts as well.

initcall_blacklist=exynos_drm_init was added to the kernel cmdline
because upstream wants to set CONFIG_DRM_EXYNOS=y instead of module.
The DRM subsystem of Exynos5 in the kernel seems to be broken for this
device. There's also no use for it since this device does not have video
out. See https://gitlab.alpinelinux.org/alpine/aports/-/merge_requests/38094
2022-09-02 12:55:49 +02:00
Oliver Smith
fb3b854976
linux-postmarketos-exynos4: disable HDMI for Midas (MR 3395)
Disable HDMI as workaround, as it seems to be buggy when HDMI is
unplugged. It's apparently in DRM_MODE_CONNECTED state, but without size
and with no modes. According to Guido from Phosh this is a bug and
should be fixed in the kernel. By disabling this until it is fixed, we
get Phosh working again.

Related: https://gitlab.gnome.org/World/Phosh/phosh/-/issues/828
2022-09-01 23:21:36 +02:00
Jonas Fentker
48cad306b9
device-pine64-pinephone: move flashlight rules to main pkg (MR 3322) 2022-09-01 16:40:39 +02:00
Duje Mihanović
194fdc32a9
samsung-coreprimevelte: enable nonfree firmware (MR 3352) 2022-09-01 08:41:26 +02:00
Duje Mihanović
fce80a1777
firmware-samsung-xcover3lte: rename to *-pxa1908 (MR 3352)
This is to emphasize the fact that this firmware package will work essentially
unmodified on the samsung-coreprimevelte and other Samsung PXA1908 phones as
well.
2022-09-01 08:41:23 +02:00
Duje Mihanović
74b5c32318
samsung-coreprimevelte: fix sudden reboots (MR 3352) 2022-09-01 08:41:23 +02:00
Duje Mihanović
1810b0ea99
samsung-coreprimevelte: use Samsung sparse format (MR 3352) 2022-09-01 08:41:23 +02:00
map220v
0e4c72fcfd
samsung-a72q: new device (MR 3390)
[ci:skip-build]: already built successfully in CI
2022-08-29 09:32:28 +02:00
bonfire_
d5d54b2b50
google-krane: new device (MR 3387)
- remove kernel_rev4/5
- various notes from @jenneron
- update modules initfs
- fix tab linter; remove linux-postmarketos-mtk-mt8183
- fixing tabs grrr and skuX values
- make deviceinfo_external_storage=true
- add hid-multitouch

[ci:skip-build]: already built successfully in CI
2022-08-29 09:17:26 +02:00
Newbyte
3012079396
linux-postmarketos-exynos4: fix build with GCC 12 (MR 3389)
[ci:skip-build]: already built successfully in CI
2022-08-28 23:07:02 +02:00
Luca Weiss
5e17ea3aed
fairphone-fp4: move to community (MR 3364)
The device fulfils the requirements for community category, and I plan
to maintain and develop this device further going forward. Move it!

[ci:skip-vercheck]: linux pkg was moved
[ci:skip-build]: already built successfully in CI
2022-08-25 09:28:58 +02:00
Mighty
9ec0be94e0
linux-postmarketos-omap: new aport (MR 3107)
[ci:skip-build]: already built successfully in CI
2022-08-25 09:25:18 +02:00
Jianhua Lu
986fd72cd7
firmware-xiaomi-elish: add touchscreen firmware (MR 3376)
[ci:skip-build]: already built successfully in CI
2022-08-25 09:17:00 +02:00
Jianhua Lu
d437ffef29
device-xiaomi-elish: enable touchscreen (MR 3376) 2022-08-25 09:16:53 +02:00
Jianhua Lu
43ec5f81d8
linux-postmarketos-qcom-sm8250: upgrade to 5.19.0 (MR 3376) 2022-08-25 09:16:48 +02:00
Leandro Friedrich
df62747456
samsung-a52q: new device (MR 3379) 2022-08-24 18:48:18 +02:00
Leandro Friedrich
0eabfc2d53
soc-qcom-sm7125: new aport (MR 3379) 2022-08-24 18:48:16 +02:00
Leandro Friedrich
59454386ea
linux-postmarketos-qcom-sm7125: new aport (MR 3379) 2022-08-24 18:48:14 +02:00
Roberto MF
15f87fa497
device-lg-hammerhead: remove device-specific weston config (MR 3380)
Weston workaround was cleaned up in 6e75a19cc1
2022-08-24 09:02:07 +02:00
TAKIZAWA Fumiya
86900a49b7
amazon-karnak: new device (MR 3375)
[ci:skip-build]: already built successfully in CI
2022-08-24 08:50:04 +02:00
Andreas Kemnade
2a963f35f7
device-kobo-clara: remove mesa-dri-gallium dep (MR 3371)
Having mesa-dri-gallium installed causes Xorg to crash. See #1658.
Furthermore, display works without at least with near-mainline kernel,
tested with osk-sdl and xfce4.
So if specific applications depend on it, it should be added as a
dependency there.

This reverts MR 3306

This is just a hotfix, Xorg/mesa should be tamed to not crash here
but analyzing that costs time.
2022-08-22 09:52:05 +02:00
Newbyte
6651bd3ef6
cubietech-cubieboard: use initramfs as initrd name (MR 3370)
boot-deploy renames initramfs-edge to initramfs.

Similar to https://gitlab.com/postmarketOS/pmaports/-/merge_requests/2521
2022-08-22 09:47:42 +02:00
Bobby The Builder
d93b955b83
main/linux-postmarketos-allwinner: upgrade to 5.19.2 (MR 3368)
[ci:skip-build] Already built successfuly on CI in MR
2022-08-20 19:54:03 -04:00
Newbyte
8bb44eb40b
linux-postmarketos-stericsson: migrate kconfig (MR 3369)
This was forgotten during the latest update.

[ci:skip-build] Already built once
2022-08-20 18:31:05 +03:00
Andreas Kemnade
04208c6461
device/testing/device-{tolino,kobo}*: use common waveform extractor (MR 3099)
There is no need to duplicate things over and over again.
Also load the waveform in initramfs before loading display
modules. That is early enough to have a working display in
initramfs.
2022-08-19 18:52:44 -04:00
Andreas Kemnade
18efe7b80e
kobo-epdc-extractor: extractor for hidden waveform partitions (MR 3099)
Extracts waveform into a file. Waveform seems to be specific to a
display batch.
2022-08-19 18:52:40 -04:00
Dylan Van Assche
3942f8b1b6
soc-qcom-sdm845: set MAC address on boot (MR 3360)
SDM845 devices running mainline lack a valid MAC address, and
fallback to a random one on each boot. This makes DHCP IPs vary
on each boot and breaks Bluetooth BNEP mode since the kernel enforces
that a valid MAC address is used when Bluetooth BNEP mode is activated.

Add a udev rule to trigger a script when the WLAN or Bluetooth interface
appear to set the MAC address by reading it from the persist partition
for the WLAN MAC address and increment it for generating a Bluetooth MAC
address. This approach seems to be common on some downstream devices
such as the Oneplus 6.

[ci:skip-build]: already built successfully in CI
2022-08-19 09:36:15 +02:00
Luca Weiss
13419f0561
testing/device-fairphone-fp4: remove i2c-gpio from initfs again (MR 3363)
Now with GPI DMA fixed this is not necessary anymore.
[ci:skip-build]: already built successfully in CI
2022-08-17 09:16:08 +02:00
Luca Weiss
c86c1d9e93
testing/linux-postmarketos-qcom-sm6350: upgrade to 6.0.0_rc1 (MR 3363)
GPI_DMA now works so we can use GENI I2C and remove bitbang i2c-gpio.
PM8008 driver from mailing list is imported and configured. CCI (camera
i2c bus) is configured plus CAMCC dependency. And some smaller changes.
2022-08-17 09:15:24 +02:00
Bobby The Builder
a34fbd3571
pine64-pinephonepro: add simple-card.conf symlink (MR 3356)
Add a workaround to fix loading the alsa ucm config.

Related: https://github.com/Tow-Boot/Tow-Boot/issues/171
[ci:skip-build]: already built successfully in CI
2022-08-17 09:09:25 +02:00
ErenTheTitan
ca4860c34b
google-juniper: add sound support (MR 3348) 2022-08-16 11:00:07 -04:00
Newbyte
3a00c8d5bc
linux-postmarketos-stericsson: fix project link and pkgdesc (MR 3354)
We are just building upstream Linux with minor patches and no longer
using the linked GitHub repo, so let's fix this to avoid confusion.

[ci:skip-build]: already built successfully in CI
2022-08-16 08:46:08 +02:00
Oliver Smith
00828c40cb
qemu-amd64,aarch64: remove edge4virt kernel
Follow removal of linux-edge4virt in Alpine:
1a838bdeb6

Fix for upstream compat failure:
  Increase 'device-qemu-amd64' pkgrel (0 -> 1), missing depend(s): linux-edge4virt

[ci:skip-build]: already built successfully in CI
2022-08-16 08:40:29 +02:00
Dylan Van Assche
133cbd3116
soc-qcom-sdm845: drop upower subpackage (MR 3361)
UPower config to shut down device on low battery
is usefull for all SDM845 devices.

[ci:skip-build]: built successfully in CI
2022-08-15 18:46:53 +02:00
Jean Lucas
2b37392456
linux-postmartketos-allwinner: add PinePhone keyboard battery driver (MR 3358)
IP5XXX is needed to be able to read PinePhone battery levels. Extra
configs were automatically added by pmbootstrap.

Signed-off-by: Jean Lucas <jean@4ray.co>
2022-08-14 22:26:11 -04:00
Dang Huynh
84b6d7a0ec
linux-nokia-n900: upgrade to 5.18.16 (MR 3350)
Signed-off-by: Dang Huynh <danct12@disroot.org>

[ci:skip-build] Already built successfuly on CI in MR
2022-08-10 16:27:53 -04:00
Dylan Van Assche
6f6d10e499
linux-postmarketos-qcom-sdm845: sync config from sdm845.config (MR 3347)
Squash of
- linux-postmarketos-qcom-sdm845: enable LED_TRIGGER_PATTERN as builtin
- linux-postmarketos-qcom-sdm845: switch BT_RFCOMM to module
- linux-postmarketos-qcom-sdm845: switch BT_BNEP to module

LED_TRIGGER_PATTERN is necessary for feedbackd to function correctly.
However, it doesn't get enabled by default when build as module,
build as built-in to avoid this problem so the notification LED
blinks correctly. This works around the problem that LED_TRIGGER_PATTERN
is not probed automatically when the Qualcomm LPG driver is used for SDM845 devices. See https://gitlab.com/sdm845-mainline/linux/-/merge_requests/34

CONFIG_BT_RFCOMM should always be build as a module otherwise it may never
be initialized at boot. Without this module, BlueZ will not enable
profiles depending on RFCOMM such as HFP. RFCOMM support as builtin may
work if the Bluetooth driver is builtin (which is not the case here), but I haven't verified that. See https://gitlab.com/sdm845-mainline/linux/-/merge_requests/38

CONFIG_BT_BNEP should always be build as a module otherwise it may never
be initialized at boot. Without this module, BlueZ will not start up its
networking plugin to provide Bluetooth PAN support. BNEP support as
builtin may work if the Bluetooth driver is builtin (which is not the case here), but I haven't verified that. See https://gitlab.com/sdm845-mainline/linux/-/merge_requests/38

[ci:skip-build]
2022-08-09 17:05:49 +03:00
Molly Sophia
08446405c5
xiaomi-polaris: new device (MR 3327) 2022-08-08 17:16:43 +01:00
Caleb Connolly
81b0abbc98
community/linux-postmarketos-qcom-sdm845: upgrade to 5.19.0 (MR 3334)
[ci:skip-build] already built in CI
2022-08-06 23:52:02 +01:00
Caleb Connolly
7facf445fe
community/linux-postmarketos-qcom-sdm845: remove unnecessary variable (MR 3334) 2022-08-06 23:51:33 +01:00
Jami Kettunen
8f1e9d1940
oneplus-dumpling: add support for alpine-edge kernel (MR 3336)
Adds Alpine's linux-edge as a kernel for the OnePlus 5T.

[ci:skip-build]
2022-08-06 16:42:52 +01:00
Jami Kettunen
7e43e9aba7
oneplus-cheeseburger: add support for alpine-edge kernel (MR 3336)
Adds Alpine's linux-edge as a kernel for the OnePlus 5.
2022-08-06 16:42:34 +01:00
Jami Kettunen
6f556380df
oneplus-dumpling: move downstream pieces to unmaintained (MR 3336)
It can still be chosen as 'oneplus-dumpling-downstream' in
pmbootstrap init.
2022-08-06 16:42:34 +01:00
Jami Kettunen
e1209e44ff
oneplus-cheeseburger: move downstream pieces to unmaintained (MR 3336)
It can still be chosen as 'oneplus-cheeseburger-downstream' in
pmbootstrap init.
2022-08-06 16:42:34 +01:00
Jami Kettunen
b1914ddb10
linux-oneplus-msm8998: move to unmaintained (MR 3336)
The downstream kernel has barely any functionality without libhybris
(which is not coming back to pmOS) so move everything related to the
OnePlus 5/5T downstream ports to downstream since a working mainline
port is much more feature rich.
2022-08-06 16:42:34 +01:00
Luca Weiss
113a5baa3e
fairphone-fp4: add support for using super partition (MR 3344)
Set the necessary flag in deviceinfo so a user can use a logical
partition that was flashed using fastbootd.

$ fastboot create-logical-partition postmarketOS 1000000000
$ pmbootstrap flasher flash_rootfs --partition postmarketOS

[ci:skip-build]: already built successfully in CI
2022-08-05 09:14:51 +02:00