We've rename the kernel repo to
https://gitlab.com/sdm845-mainline/linux,
update the package to point to the new repo.
[ci:skip-build]: already built successfully in CI
The older version we were shipping seems to have been removed upstream,
and thus this package didn't build anymore and has started blocking
Anbox related MR's
Fix build stopping at:
*
* Restart config...
*
*
* ARMv8.5 architectural features
*
Branch Target Identification support (ARM64_BTI) [Y/n/?] y
Use Branch Target Identification for kernel (ARM64_BTI_KERNEL) [Y/n/?] (NEW)
For some reason this did not happen (the whole 'Restart config...'
block) in the gitlab CI run with pretty much the same commit that ended
up being merged. Before it got merged however, it ran with
[ci:skip-build]. Maybe because of GCC-9 vs. GCC-10.
Related: https://gitlab.com/Kanedias/pmaports/-/jobs/1246094717
Related: https://builds.sr.ht/~postmarketos/job/503811
* Adds postmarketos-tweakd daemon to apply non-persistent settings on
boot
* Adds PinePhone settings file that adds the hardware specific battery
configuration
uboot-tools is provided by u-boot-tools but sometimes apk still gets
confused. This change prevents errors such as
pine64-pinephone:~$ sudo apk upgrade --verbose
WARNING: Failed to perform initial self-upgrade, continuing with full upgrade.
ERROR: unable to select packages:
uboot-tools (virtual):
provided by: u-boot-tools
required by: device-pine64-pinephone-0.25-r1[uboot-tools]
[ci:ignore-count]
[ci:skip-build]: already built in CI successfully
Make consistent with other UIs that have mobile-config-firefox installed
by adding font-noto and font-noto-emjo to _pmb_recommends.
Order _pmb_recommends alphabetically while at it.
[ci:skip-vercheck]: _pmb_recommends change doesn't need pkgrel bump
Enable SATA host support, the AHCI driver, and SCSI disk support so that
some generic PCIe SATA cards will properly detect and mount SATA drives
connected to them.
Tested on a RockPro64 with 2 3.5" drives connected in RAID 0 to an
Ableconn PEXSA115A 2-port PCIe x2 card (ASM1062).
The dialog to set a kwallet password is currently broken and unusable if
you try to set a password. To prevent this, just install a
pre-configured wallet without a password.
Not a great solution, but better than having the functionality be broken
for now.
Proper fix would be upstream fixing the virtual keyboard so users can
enter values in the right boxes. Once that is fixed, we can (and should)
revert this
Note by ollieparanoid: this patch was originally added as MR 2079 to
v21.03, instead of to master first and then getting cherry-picked to
edge as the process should be.
Make it easy for users to disable animations, switch to dark mode (by
changing the GTK theme), change suspend time and other tweaks.
[ci:skip-vercheck]: _pmb_recommends change doesn't need rebuild
[ci:skip-build]: already built successfully in CI
Fix the following error:
gcc/graphite-isl-ast-to-gimple.c:114:7: error: 'isl_id_free' was not declared in this scope; did you mean 'isl_aff_free'?
Found the patch here:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86724
Note that Alpine edge has isl 0.18 and not 0.20, but the error message
is the same and the patch works.
[ci:skip-vercheck]: no need to rebuild existing packages for this
Related: https://builds.sr.ht/~postmarketos/job/489478
Fails to build for armv7. Not sure if anyone is using this, and if they
are, this should be fixed / updated and submitted to Alpine instead (as
noted in the last MR where this was updated, MR 985).
In file included from /home/pmos/build/src/apitrace-9.0/thirdparty/libbacktrace/backtrace.c:38:
/home/pmos/build/src/apitrace-9.0/thirdparty/libbacktrace/backtrace.h:54:10: fatal error: gstdint.h: No such file or directory
54 | #include "gstdint.h"
| ^~~~~~~~~~~
compilation terminated.
Add a patch that ads the Samsung S5K5BAF CMOS image sensor and enables
the associated MIPI CSI-2 receiver node.
Also update to the latest stable kernel.
[ci:skip-build] already built successfully in CI
Temporarily disable tests for armv7, as py3-podcastparser and probably others
are not yet rebuilt against python 3.9 in Alpine edge.
[ci:skip-vercheck]
Use replaces="" to overwrite files in /usr/share/applications, instead
of creating files for /etc/skel/.local/share/applications. This way, we
can add new overrides when upgrading the package, not only initially
when creating the user's home dir from /etc/skel.
Remove v20.05 related comment, and "firefox-safe.desktop" override,
which is now "org.mozilla.firefox-safe.desktop".
Add org.gnome.Glade.desktop from glade, which gets pulled in by
libhandy1-dev (e.g. when installing makedepends for phosh). (Users who
really want to start glade on postmarketOS can either do it with the
command line, or uninstall postmarketos-hidden-desktop-entries, or
replace the file in /etc/ with the original .desktop entry. For everyone
else who just installed glade as makedepend, it removes one awkward
desktop launcher.)
I looked into modernizing this package to hide launchers that appeared
for GTK4 (issue 1029). However, this should be fixed in Alpine's gtk
package: https://gitlab.alpinelinux.org/alpine/aports/-/merge_requests/20116
As suggested by ollieparanoid, adds adwaita-icon-theme as a dependency
to gpodder-adaptive, for users that don't use phosh.
[ci:skip-build]: already built successfully in CI
These are required to make it work with the latest ModemManager patches,
especially the patch that switches BAM-DMUX to Raw-IP mode.
[ci:skip-build]: already built successfully in CI
- Update to Linux 5.11.7
- Upstreamed more patches
- Switch BAM DMUX (mobile data) driver to Raw-IP mode.
This makes it work with the upstream version of ModemManager,
reduces overhead a bit and is overall cleaner.
- Add QMI "memshare" driver which is needed for GPS to work on most
MSM8916 devices.
- GPS has been tested successfully on:
- alcatel-idol347
- lg-m216
- longcheer-l8150 (wileyfox-crackling)
- longcheer-l8910 (bq-paella)
- motorola-harpia
- motorola-osprey
- samsung-a2015 (a3(u)lte, a5(u)lte)
- samsung-serranovelte
- wingtech-wt88047 (xiaomi-wt88047)
- Needs more testing/investigation on:
- asus-z00l
- asus-z010d
- wingtech-wt865x8
- Add SMB1360 battery/charger/OTG driver for longcheer-l8190
and wingtech-wt88047.
- Rework TFA9895 speaker amplifier driver for potential upstreaming,
make it work for TFA9897, add channel selection and a lot of cleanup.
- Add INSTALL_MOD_STRIP=1 to maybe reduce the size of modules a bit.
- Other things I forgot :)
Device changes:
- alcatel-alto5-vdf: Initial support for Vodafone Smart prime 6
- USB
- Storage (eMMC, SD card)
- Buttons
- WiFi, Bluetooth
- alcatel-idol347: Initial support for Alcatel Idol 3 (4.7")
- USB
- Storage (eMMC, SD card)
- Display, Brightness
- Touchscreen, Buttons, Vibrator
- WiFi, Bluetooth
- Accelerometer, Magnetometer, Gyroscope, Proximity
- Audio (no headphones yet)
- Modem (voice call audio needs some more minor changes)
- asus-z00l
- SD card
- IMU (Accelerometer + Gyroscope), Magnetometer
- lg-m216
- Battery/charging
- longcheer-l8150 (wileyfox-crackling)
- Tweak battery values slightly for 25°C instead of 0°C
- longcheer-l8910 (bq-paella)
- Battery/charging
- USB OTG
- motorola-harpia
- Add panel driver for "boe" panel
- samsung-gt510wifi/matissevewifi:
- Fix touchscreen
- wingtech-wt88047 (xiaomi-wt88047)
- Battery/charging
- USB OTG
[ci:skip-build]: already built successfully in CI
* Add u-boot build with a lot of patches that makes the display work in
u-boot for boot selection
* Upgrade the rockchip kernel to 5.11 mainline with config for the
rk3399 devices built-in
* Make the rockpro64 and pinebook pro use the newer kernel
[ci:skip-build]
In order to have hardware acceleration in osk-sdl, we have included mesa
for some devices (like the PinePhone) in initfs-extra. Mesa drags in
libLLVM, which got a size increase of 27 MB in the last version. This
leads to running out of space on the boot partition:
==> initramfs: creating /boot/initramfs-postmarketos-allwinner-extra
gzip: write error: No space left on device
cpio: write error: Broken pipe
Improve the situation by not directly writing initfs-extra to /boot
(next to the old version), but to a temporary directory first. Replace
the old version with the new version afterwards (like before).
This is a rather minimal fix for this specific issue. The mkinitfs
script needs more fixing (it's one of the oldest pieces of code in
postmarketOS and could use a rewrite...), but that's out of scope for
this patch.
`qt5-qtquickcontrols` and `qt5-qtgraphicaleffects` are needed, else
qtwebbrowser shows a blackscreen on start.
[ci:skip-build]: already built successfully in CI
Update to the 5.11.0 kernel release.
This also fixes the previous build warnings.
[ci:skip-build] Already built fine on CI.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Based on the Alpine mesa APKBUILD, but only the DRI driver
is packaged. It conflicts with the DRI gallium driver as
they both provide ARM dri drivers. It depends on the main
Mesa packages.
The work on an adaptive gpodder UI by tpikonen has continued
and is now available in the official gpodder repo as a dedicated
branch. This commit updates the package to the latest current
version of the branch.
CRDA in the kernel requires a regulatory database to be available
to configure the WiFi card correctly following the regulations in
each possible environment.
Add post-upgrade file with a warning, so we don't symlink it to the
post-install script.
[ci:skip-vercheck]: no need to rebuild the package
Related: build.postmarketos.org#85
