Commit graph

677 commits

Author SHA1 Message Date
HenriDellal
b97c340c36
nobby-230: new device (!865) 2020-01-09 00:33:52 +03:00
George Hopkins
ef4a30d29c
device/linux-huawei-y530: fix lookup of symbolic links (!856) 2020-01-04 14:04:23 +03:00
George Hopkins
685f838c8b
huawei-y530: change to armv7 (!850)
[ci:skip-build]: already built successfully in CI
2020-01-03 04:45:57 +01:00
Harsh Lathwal
4250586168
yu-tomato: new device (YU Yureka) (!844)
[ci:skip-build]: already built successfully in CI
2020-01-03 03:41:06 +01:00
Daniele Debernardi
18e5124cba
raspberry-pi4: new device (!843) 2020-01-03 03:16:17 +01:00
Minecrell
cd6d1b82e3
device-samsung-golden: add mainline kernel (!833) 2019-12-30 19:19:40 +01:00
Minecrell
281504d6af
device-samsung-golden: split downstream kernel into separate package (!833)
Prepare for mainline by moving the downstream-specific files
into a separate downstream package.
2019-12-30 19:19:40 +01:00
Minecrell
6171f6de66
device-samsung-golden: use U-Boot Fastboot interface instead of Heimdall (!833) 2019-12-30 19:19:40 +01:00
DolphinChips
9018537264
device-samsung-klte: remove nonfree-firmware from depends of kernel-downstream (!837) 2019-12-30 18:41:56 +01:00
Nikita Travkin
f152e1d636
wileyfox-crackling: optimize module load order (!836)
This fixes warnings on boot.
2019-12-29 02:41:23 +03:00
Bhushan Shah
543598e81a
pine64-pinephone: start eg25 service at boot (!842)
This should enable modem properly on the pinephone
2019-12-28 21:35:29 +05:30
Icenowy Zheng
5bf2defdcf
pine64-pinephone: add script to bring up EG25 on current sample (!620)
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
2019-12-28 20:43:05 +05:30
Icenowy Zheng
f8ba7b6a20
pine64-pinephone: drop out-of-date force-fbdev configuration (!620)
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
2019-12-28 20:42:06 +05:30
Nikita Travkin
4ae1e76e73
device-wileyfox-crackling: enable display on boot (!830)
This commit adds necessary kernel modules to initramfs to enable
display early on boot which allows FDE and charger-sdl to work
2019-12-25 17:20:53 +01:00
Minecrell
3a70f3748f
samsung-serranovelte: new device (Samsung Galaxy S4 Mini Value Edition) (!828)
samsung-serranovelte runs Linux mainline (linux-postmarketos-qcom-msm8916)
with support for:

  - Display
  - Touchscreen
  - Sound
  - GPIO keys
  - NFC
  - Vibrator
  - IMU (Accelerometer + Gyroscope)
  - Battery

The primary limitation of samsung-serranovelte is that it can only run
ARMv7 (32-bit) binaries, even though its hardware (MSM8916) is 64-bit
capable. This is because it was never updated with 64-bit compatible
firmware (usually introduced together with the Android 5.0 update).

[ci:skip-vercheck]: only added new architectures
2019-12-24 03:14:54 +03:00
Minecrell
cf8b2f605d
device/soc-qcom-msm8916: enable on armv7 (!828) 2019-12-24 03:14:54 +03:00
Luca Weiss
62a557ab97
device-fairphone-fp2: configure getty using deviceinfo_getty variable (!817) 2019-12-22 11:38:15 +00:00
Alexey Min
bd5e3ed159
pine64-pinetab: fix emmc booting (!801) 2019-12-21 19:16:19 +03:00
Martijn Braam
36427e16da
pine64-pinephone: fix emmc booting (!801) 2019-12-21 19:04:24 +03:00
Rudy
9bc9ff2170
samsung-expressatt: new device (Samsung Galaxy S3 I437) (!808) 2019-12-21 15:40:54 +03:00
Minecrell
4ecef0e962
samsung-golden: update firmware packaging (!807)
- Update WiFi firmware to newer version
- Change paths so that (eventually) mainline could load the same firmware
2019-12-21 15:19:25 +03:00
Daniele Debernardi
6e237d9d3d
device-surftab-wintron7.0: replace linux-vanilla with linux-lts (!814)
[ci:skip-build]: already built successfully in CI
2019-12-21 11:01:40 +01:00
Daniele Debernardi
132423e942
device-tablet-x64uefi: replace linux-vanilla with linux-lts (!814) 2019-12-21 03:09:47 +01:00
Pops Dylan
7ca42afe42
device-purism-librem5dev: configure getty using deviceinfo_getty variable (!796)
Move getty configuration from the .post-install script to deviceinfo.
2019-12-14 02:58:53 +01:00
Drew DeVault
b6482e4571
device/device-pine64-pinephone: add ofono-openrc (!805)
The post-install depends on the -openrc files being present, and if the
dependency isn't explicitly specified then the device-* package may be
installed before the -openrc package, causing the post-install to fail.
2019-12-14 02:27:58 +01:00
Hunter Sell
8baf04df3c
hisense-m470bsa: new device (Hisense Sero 7 Pro) (!721)
[ci:skip-build]: already built successfully in CI
2019-12-14 00:52:45 +01:00
Antoine Fontaine
bb49d85ca8
wiko-lenny2: new device (Wiko Lenny 2) (!773) 2019-12-12 12:51:38 +03:00
Pops Dylan
2deca0969f
lg-hammerhead: configure getty using deviceinfo_getty variable (!795)
Move getty configuration from the .post-install script to deviceinfo.
2019-12-11 02:00:55 +03:00
Pops Dylan
9a5da8f65a
pine64-pinephone: configure getty using deviceinfo_getty variable (!797)
Move getty configuration from the .post-install script to deviceinfo.
2019-12-10 17:33:39 +03:00
Pops Dylan
2c803889d6
pine64-pinetab: configure getty using deviceinfo_getty variable (!798)
Move getty configuration from the .post-install script to deviceinfo.
2019-12-10 01:15:56 +03:00
HenriDellal
77a160c94d
htc-primou: new device (!791) 2019-12-09 19:37:22 +03:00
Antoine Fontaine
805ba03d87
raspberry-pi: fix sway, phosh startup (!775)
Both sway and phosh require hardware acceleration (DRM) to work. Let's
activate that when we request one of them. Also don't let them fail
during startup on inputless setups (which is common on a raspberry pi).

Phosh is too slow to be unsable, but now, it'll at least be unusable out
of the box ;-)
2019-12-07 15:27:10 +01:00
Konrad Dybcio
201573b4f6
sony-nicki: fix elogind/cgroups regression, remove unused defconfig (!776)
Without this MR, elogind, and therefore weston will not start as it will
complain about cgroup mess:

[   21.387150] elogind-daemon[1538]: Failed to determine whether /sys/fs/cgroup is a mount point: Symbolic link loop
[   21.388341] elogind-daemon[1538]: Failed to mount cgroup at /sys/fs/cgroup/elogind: No such file or directory

Fix by applying this patch, thanks minlexx for pointing me to it! This
might possibly also be applicable to other kernel 3.4-based ports.

[ci:skip-build]: already built successfully in CI
2019-12-07 13:48:05 +01:00
Mike
d23549a251
samsung-golden: rename from samsung-i8190 (!719) 2019-12-06 16:25:01 +03:00
Mike
d19dd5d51d
samsung-i8190: change to armv7 (!719) 2019-12-06 16:24:58 +03:00
Sireesh Kodali
16891e81f9
motorola-potter: fix touchscreen (!774)
This adds an initfs-hook that enables the sceen, similar
to how the motorola-lux works. Touchscreen now shows
output on `libinput debug-events`
2019-12-06 14:38:31 +03:00
Martijn Braam
727e21b20f
device-pine64-pinephone: add alsa ucm config (!772)
This provides alsa usecase profiles for the audio routing in the
pinephone, pulseaudio also picks up this config.

[ci:skip-build]: already built successfully in CI
2019-12-04 22:16:51 +01:00
km2
53ee5b4c8b
zt3-p731a20: add asound.state from finepower-f1 (!761)
[ci:skip-build]: already built successfully in CI
2019-11-30 15:49:48 +01:00
Alexander Polynomdivision
b88862a624
samsung-herolte: use dtbtool-exynos (!764)
Since dtbtool-exynos is packaged, we can use it to generate the DT image
outside the kernel tree.

[ci:skip-build]: already built successfully in CI
2019-11-27 22:45:33 +01:00
pedro
d3fedc4b0c
lg-mako: fix wifi (!763)
Add config file including 1 second delay when activating wlan driver.

Related: #46
2019-11-24 20:56:06 +01:00
Martijn Braam
277817162d
device-pine64-pinephone: hardcode partitions (!756)
[ci:skip-build]: already built successfully in CI
2019-11-24 20:16:53 +01:00
Dolphin von Chips
1a1a703fe9
samsung-j1mini3g: fix X11 and framebuffer colors (!753)
[ci:skip-build]: already built successfully in CI
2019-11-24 20:10:17 +01:00
Dolphin von Chips
b1db5f1a53
samsung-j1mini3g: use armv7 and msm-fb-refresher (!753) 2019-11-24 20:09:15 +01:00
alxndrpsclt
66ec738e63
lg-hamerhead: fix X11 UIs based on frammebuffer (!745)
[ci:skip-build]: already built successfully in CI
2019-11-20 23:14:08 +01:00
Luca Weiss
3362660cae
htc-memul: new device (HTC One Mini 2) (!641)
[ci:skip-build]: alraedy built successfully in CI
2019-11-20 22:30:34 +01:00
Daniele Debernardi
6dd9e47ba9
qemu-amd64: fix xfce4 background (!728)
[ci:skip-build]: already built successfully in CI
2019-11-20 21:49:01 +01:00
Daniele Debernardi
12e1ab59cf
qemu-amd64: set default gateway (!728) 2019-11-20 21:48:07 +01:00
Daniele Debernardi
d7c69d9e89
nokia-n900: fix xfce4 background (!748)
[ci:skip-build]: already built successfully in CI
2019-11-20 21:42:13 +01:00
Luca Weiss
66db4dff0c
main/xf86-video-opentegra: remove (!754)
The package doesn't build anymore and blocks the binary repository.

See postmarketOS/pmaports#339
2019-11-19 19:53:55 +01:00
Luca Weiss
1d966578d2
fairphone-fp2: reorganize dependencies (again), add mainline subpackage (!692)
Remove all firmware-support dependencies from the firmware package and
add them to -downstream-firmware and -mainline-firmware packages which
have an install_if on the downstream or mainline kernel subpackage.

[ci:skip-build]: already built successfully in CI
2019-11-17 16:28:30 +01:00