Commits cfb5d41b and ead17254 updated the default battery levels for
warnings and actions in the pinephone and the pinetab. Since then,
the chances of the phone dying for lack of battery power have completely
dissapeared. However, the battery icon in phosh was never updated to show
a "caution" battery level. The value was hardcoded and ignored the setting
in the config file. This commit fixes that issue
* Prevent interactive warning to pop once already approved when
[over/down]clocking DRAM
* Make sure $freq is always set
Co-Authored-By: Oliver Smith <ollieparanoid@postmarketos.org>
This patch fixes:
fastboot: error: Couldn't parse partition size '0x'.
I don't get the bug myself, but it was reported that this works as
expected. Let's merge it to pmaports temporarily while it's getting
upstreamed.
Related: https://github.com/nmeum/android-tools/pull/27
Related: pmbootstrap issue 2007
[ci:skip-build]: already built successfully in CI
uboot-tools is provided by u-boot-tools but sometimes apk still gets
confused. This change prevents errors such as
pine64-pinephone:~$ sudo apk upgrade --verbose
WARNING: Failed to perform initial self-upgrade, continuing with full upgrade.
ERROR: unable to select packages:
uboot-tools (virtual):
provided by: u-boot-tools
required by: device-pine64-pinephone-0.25-r1[uboot-tools]
[ci:ignore-count]
[ci:skip-build]: already built in CI successfully
Latest patches from Purism, including some they backported from
upstream.
fixes#1058
The debian dir was dropped from the archives in this fork repo, but the
number of patches has been dramatically reduced.
A new mechanism (thanks @ollieparanoid) is added here to compare the
list of patches stored in pmaports when this package was upgraded to the
list of patches in purism's repo @ some commit this package uses, so
that any difference can be detected (pacakge will fail to build). If
there's a mismatch, the patches from this repo should be updated/added
to match what's in purism's repo @ the commit, and purism_patches.series
should be updated to match the debian/patches/series file in the purism
repo.
Fix build error:
CMake Error at /usr/lib/cmake/Qt5Svg/Qt5SvgConfig.cmake:111 (find_package):
Could not find a configuration file for package "Qt5Widgets" that is
compatible with requested version "5.15.3".
The following configuration files were considered but not accepted:
/usr/lib/cmake/Qt5Widgets/Qt5WidgetsConfig.cmake, version: 5.15.2
MR for Alpine:
https://gitlab.alpinelinux.org/alpine/aports/-/merge_requests/20307
[ci:skip-vercheck]: pkgrel>0 on purpose
still missing:
* audio
* lcd backlight control
* touchscreen driver
* front camera
* accelerometer mount fix (driver seem not to support mount-matrix)
* 3D acceleration
* HDMI support
(Also sync with Alpine while I'm at it...)
This is necessary for mobile data to work on MSM8916-based devices
after some changes in the network driver (bam-dmux) to operate in
Raw-IP mode instead of Ethernet mode (which is somewhat broken).
* Add u-boot build with a lot of patches that makes the display work in
u-boot for boot selection
* Upgrade the rockchip kernel to 5.11 mainline with config for the
rk3399 devices built-in
* Make the rockpro64 and pinebook pro use the newer kernel
[ci:skip-build]
This is 3.24.27 w/ Purism's mobile UI patches in their fork. According
to Purism, 3.24.27 resolves some stability issues (like a segfault when
scrolling)
[ci:skip-build]: already built successfully in CI
Changes from purism:
- 2 second boot delay removed
- This includes an updated DDR memory training firmware version.
- patch to work around wifi device not being available on boot
Package changes:
- u-boot installed in location consistent with other pmaports/u-boot
packages
- update-u-boot script added for upgrading u-boot on the device
- devkit u-boot split off into a sep. subpackage
Let pmbootstrap build the package in the native chroot. This is
important for the v21.03 branch, which needs to ship its own
cross-embedded toolchain, as the one from Alpine is only in testing and
therefore not available in the Alpine v3.13 branch that pmOS v21.03 is
based on. By using the native branch, it is enough to build the
cross-embedded toolchain for x86_64, and we can avoid qemu related
errors when attempting to build it for arm architectures.
As a nice benefit, this makes compilation of the package faster on edge,
too.
[ci:skip-build]: already built successfully in CI
The previous implementation of this caused upower to select a thing
called 'flash_strobe' in the L5, which doesn't operate like a
flashlight. This changes the detection logic to look at the suffix, on
the pinephone the device ends in ':flash', and on the L5 it ends in
':torch'.
fixed#967
This patch is in purism's fork and it removes messages like this when
starting upower on the librem5 by properly detecting/setting the type:
TI:15:11:12 did not recognise USB path /sys/devices/platform/soc@0/30800000.bus/30a20000.i2c/i2c-0/0-003f/power_supply/tps6598x-source-psy-0-003f, please report
...
TI:15:11:12 did not recognise USB path /sys/devices/platform/soc@0/30800000.bus/30a50000.i2c/i2c-3/3-006a/power_supply/bq25890-charger, please report
Handle USSD QMI indication messages.
Add support for UCS2 USS Data coding scheme.
Check for User Action TLV type.
Downstream the accepted ofono patch as temporary solution.
This has upstreamed fixes for call audio on the L5, but upstream hasn't
made a release yet. In the meantime, this is needed for calls to work on
5.11.0 and later kernels
[ci:skip-build]: won't finish in time
The TLVs are documented in GobiAPI. I pass 0xff for the call ID, as the
stock RIL appears to always do. I would guess it means "current foreground
call."
The call ID is returned in TLV 0x10, but I didn't implement parsing of
that.
Co-authored-by: Joey Hewitt <joey@joeyhewitt.com>
Acked-by: Alexey Andreyev <aa13q@ya.ru>
GNOME settings daemon notifies the user that the device will
suspend soon through a notification.
However, this triggers the notification LED which stays on during
suspend, causing unnecessary power consumption.
Plasma 5.20.90 was being built while a libgps upgrade happened. It seems
that even though the package had already been built for every arch, it
had not for x86 yet and thus our plasma-workspace is still depending on
the older package and fails to install because it isn't available
anymore
Just bump the pkgrel so it now gets correctly build against libgps.so.27
