Let all packages depending on tinydm depend on tinydm-openrc too. This
is needed to make sure that tinydm-openrc is installed, before the
tinydm service is enabled in the UI's post-install scripts.
This was not an issue because tinydm currently depends on tinydm-openrc.
But that's a hack and will be removed when upstreaming tinydm to alpine.
[ci:skip-build]: already built successfully in CI
Even on the PinePhone KDE community edition Megapixels will be shipped
instead of plasma-camera, so let's do the same
The resulting package doesn't change, _pmb_recommends is only a
pmbootstrap thing, so we don't have to bump pkgrel
[ci:skip-vercheck]
postmarketos-ui-plasma-mobile has plasma-camera in _pmb_recommends.
plasma-camera does not build for x86, because mpg123-libs-1.26.3-r0 is
still broken in Alpine edge repos (aports#11807).
Disable postmarketos-ui-plasma-mobile for x86 again, so the CI check
test_aports_ui doesn't fail anymore with:
postmarketos-ui-plasma-mobile/APKBUILD: package 'plasma-camera' from _pmb_recommends not found for arch 'x86'
[ci:skip-vercheck]: only modifying arches
[ci:skip-build]: unfortunately, postmarketos-ui-plasma-mobile fails to
build for x86_64 too due to broken libdv in Alpine (aports#11892).
I'll create MRs to Alpine to fix the broken depends, so we should be
able to enable it again soon.
Related: https://gitlab.alpinelinux.org/alpine/aports/-/issues/11807
Related: https://gitlab.alpinelinux.org/alpine/aports/-/issues/11892
"plasma" and some related packages are currently missing in Alpine edge
armv7 due to a cyclic dependency. Let's disable all packages depending
on plasma for armv7 temporarily, to get the pmOS edge armv7 repo up
again.
[ci:skip-build], [ci:skip-vercheck]: only arch line changed
Related: build.postmarketos.org#72
At the moment we have Contributor: lines on some packages (but not all of them),
but often they don't represent the actual contributors to the package very well.
E.g. when we added them retroactively to the device packages we only added
the initial contributor (which isn't necessarily the person
who made most of the work for a device...)
The Git history is the most representative source for figuring out
who contributed to a package, so there is no reason to duplicate that
into the APKBUILD.
[skip ci]: way too many packages
The point of this program was to have something to play with once weston
boots up. It does not make sense to ship this with
postmarketos-ui-plasma-mobile.
Related: postmarketos-demos#1
We should do this in the UI packages that need it rather than in the
device packages themselves because for example Phosh doesn't need Ofono
but ModemManager
That path works just as well as documented at
https://doc.qt.io/qt-5/qstandardpaths.html (GenericConfigLocation) and
it doesn't depend on the user being created after the package has been
installed.
The openrc service of lightdm has been moved to lightdm-openrc in
Alpine. Fix all UIs depending on lightdm, so their post-install script
does not fail with:
Executing postmarketos-ui-plasma-mobile-2-r6.post-install
* rc-update: service `lightdm' does not exist
kirigami-gallery is not meant for users, but it is good testing
application and is even part of reference image provided by Plasma
Mobile team.
For now we are not targetting plasma-mobile towards users anyway and
only developers, so include kirigami-gallery in main UI package.
I've ordered the $depends list alphabetically for better readability,
and added the bluedevil (for Bluetooth) kwallet-pam and
xdg-desktop-portal-kde runtime dependencies.
[ci:skip-build]: already built successfully in CI
An SMS application for Plasma Mobile, finally!
Please note that it's still in development, and it doesn't work
flawlessly yet. For example new chats can't be initiated, someone else
has to send an SMS to you first before you can send an SMS back.
However, with this application basic phone functionality should work
with Plasma Mobile. I'll keep it up-to-date while it develops, just like
the other to-be-released Plasma Mobile applications we already package
(e.g. Plasma Camera).
[ci:skip-build]: already built successfully in CI
[ci:skip-vercheck]
Move Wayland meta packages to LightDM and replace ConsoleKit2 for
elogind for Plasma.
Now we don't need the hacky scripts in /etc/profile.d anymore!
This change requires elogind for both Weston and Plasma Mobile. Using
elogind allows us to use one patch less in kwin. Weston has logind
(which elogind provides) support disabled in Alpine Linux, so I put the
package in temp/ with it enabled for now, but will upstream this change
to Alpine.
Remove consolekit2 dependency in postmarketos-ui-xfce4.
[ci:skip-build]: already built successfully.
Plasma lockscreen is currently hard or impossible to unlock
using phone itself, that's why you should send a command to
ConsoleKit over DBus in a shell. This script saves from extra
typing.
Without QT_QUICK_CONTROLS_MOBILE=true, kwin would assume it is on
desktop with touchscreen and would try to show resize overlay. which
doesn't work on phone.
Fixes#206
This aport replaces qmltermwidget, which is now used as a submodule
instead. kde/qmltermwidget is moved to main/qmltermwidget and uses a
different upstream source, and Index is updated to use it from it's new
source
PureTryOut said: The situation has improved, that's for sure, but the
scaling still isn't perfect. However, according to bshah, this is how it
should be done, so I'm fine with merging this anyway.
We had 2 music players included which doesn't make sense, and vvave is
actually made with a focus on mobile.
[skip ci]: do not try to build this merge request, ollieparanoid made
sure that it builds for x86_64, armhf, aarch64.
This MR updates the app to the latest commit (currently from 2 days
ago). It also updates plasma-angelfish, but I changed the $pkgrel to
follow the format of the other Git packages.
This also re-enables plasma-angelfish and vvave in the default Plasma
Mobile installation, as they were previously disabled due to
qt5-qtwebengine (which they depend on) requiring a soname bump
upstream.
Switch plasma-mobile to use xdg-shell instead of wl-shell. wl-shell is
deprecated in Qt 5.12 and is breaking plasmashell, it seems.
Related upstream issue:
https://invent.kde.org/kde/plasma-phone-components/issues/2
This introduces another regression that applications don't start
maximized. Will have to solve this issue upstream.
Closes#159
When rendering on framebuffer, always do software rendering. This
should make it possible to boot up Plasma Mobile on most devices with
downstream kernels, although terribly slow. Still better than a black
screen though. Tested and working on the samsung-i9100.
We can improve the code and possibly make the rendering mode
configurable per device once we experimented more with:
* llvmpipe vs. softpipe on various devices
* armv7 (around the corner in Alpine)
* a proper display manager like lightdm
Both depend on qt5-qtwebengine, which needs to be rebuilt in Alpine
after the soname bump of libavformat [1]. Disable them for now, so
plasma mobile can still be installed, and the pmbootstrap test case
that installs it runs through again.
[1]: https://github.com/alpinelinux/aports/pull/5586
This environnment variables provides better integration and themeing to
various components and is inline with what reference Plasma Mobile
images is doing
Signed-off-by: Bhushan Shah <bhush94@gmail.com>
* Add NetworkManager and PulseAudio applets to Plasma
* This crashes plasma mobile on armhf (where it is not usable due
to performance problems anyway), except on mainlined kernels
with hardware accelerated graphics. This is mentioned in the
pkgdesc of postmarketos-ui-plasma-mobile now.
It made problems, see #956 and #952. Originally this was added, so
our plasma mobile packaging - which targets wayland - doesn't need
to depend on X11 stuff. And because dbus-x11 caused a 1 minute
wait for an X server (#377).
We have yet to figure out if this problem returns, but even if that
happens, it's better than having it completely broken. And we can
probably figure out a better way to fix it (for real).
* Add postmarketos-ui-plasma-mobile
* Add more required packages
* Upgrade plasma sources
* Modernize APKBUILDs
* Make it run in general
* Support RGB32 framebuffer with BGR order (thanks @zhuowei!)
