These options are required by `iwd`. Make use of the `kconfigcheck-iwd`
APKBUILD option to ensure the required config options remain selected.
[ci:skip-build] already built successfully in CI
ALSA UCM configs are now upstreamed which causes
a conflict with the device package as both are now
providing the same files. Drop our configs in the device package.
For a merge list, please see the merge commits:
- 5.18.1 - (3d98cf52b5)
- 5.18.2 - (99cf0d285f)
- 5.18.3 - (b425b70a63)
-----
This also changes the following Kconfig options:
- CONFIG_SCSI_UFS_BSG -> y
Change-Id: I4406f381b48a894ea0bff3006fb3fa62683e61a0
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build]: already built successfully in CI
Run "pmbootstrap kconfig migrate asus-me176c" to update the kernel
config for the new Linux version. Otherwise there is an interactive
prompt that times out on BPO (although it succeeds on GitLab CI for
some strange reason).
Add subpackages that automatically cause installation of the Vulkan
and libva driver if packages using them get installed. This reduces
the size of a minimal rootfs but still ensures those are present if
needed.
[ci:skip-build]: already built successfully in CI
The new linux-edge / 5.18 kernel will likely not make it in time for
the v22.06 release so let's upgrade the good old 5.4 kernel to the
latest stable release at least.
File system modules are included by default in postmarketos-mkinitfs
and loaded dynamically when needed.
[ci:skip-build]: already built successfully in CI
- Update to Linux 5.18
- Fix Bluetooth startup problem
- Upstreamed not so many patches this time
- Even more things I forgot than usual...
pmOS kernel config:
- Enable BNEP, RFCOMM for extra BT features
Device changes:
- samsung-j3ltetw/j5/j5x:
- Now covered by a common device tree include
- Add proper display driver (no brightness control yet)
- Hall sensor (except j3ltetw)
- Touchscreen (only j3ltetw and j5x, j5 is still WIP)
- Sound/Modem for all of them
New devices:
- samsung-grandmax (Samsung Galaxy Grand Max)
- eMMC, SD card, USB, Buttons, WiFi/BT, Vibrator
- Display
- Touchscreen
- Sensors (Accelerometer)
- Sound/Modem
- Battery status
[ci:skip-build]: already built successfully in CI
Drop the weston config, as it was for fbdev which has not been supported
in weston anymore for a while.
Remove Martijn as Co-Maintainer, as both previous maintainers of the
Nokia N900 stopped maintaining it when the device was briefly dropped
from community.
Co-Authored-By: Oliver Smith <ollieparanoid@postamrketos.org>
[ci:skip-build]: already built successfully in CI
Drop 0002-ARM-dts-n900-remove-rx51-battery.patch, because this wasn't
needed for postmarketOS in the first place. The patch was created for
Maemo Leste as upower quirk initially and they don't carry it anymore
either.
Drop other patches, as they have been upstreamed.
Co-Authored-By: Oliver Smith <ollieparanoid@postmarketos.org>
Dropped the usb-c patches, because it looks like usb-c charging works
now out of the box on 5.18, and that was the primary reason for me to
include those patches here originally.
[ci:skip-build] already built successfully in CI
While the newer "Linux board support package" has newer versions for
the "modem" and "venus" firmware, the "wcnss" firmware is actually
older than the one in the previous 1034.2.1 release. To avoid
downgrading it, it is still packaged from the old release in a separate
APKBUILD. (It is probably also better tested than the new release...)
[ci:skip-vercheck]: non-zero pkgrel is intended to match old package
[ci:skip-build] already built successfully in CI
- Patch from Robert Nelson and Hansem Ro.
- Based on the work of Hansem Ro,
who owns another device, the First Generation Kindle Fire,
which has similar specifications as the Samsung Galaxy Tab 2 7.0.
mesa-dri-swrast no longer exists and just installs,
mesa-dri-gallium. However, this might not always be the case, so
let's change it before it causes any issues.
[ci:ignore-count]
[ci:skip-build]
It seems like at least samsung-a5 needs the same "facility lock"
workaround as samsung-serranove, otherwise ModemManager can not detect
the SIM card correctly. Move it to a subpackage of soc-qcom-msm8916
and apply it to samsung-a3 as well just to be sure.
So far this issue seems limited to Samsung devices, at least bq-paella
is not affected (tested with the same SIM card), so it does not seem
right to apply it unconditionally to all devices.
[ci:skip-build] Already built successfuly on CI in MR
- Add support for sdm845-samsung-starqltechn
- Fix touch for axolotl
Change-Id: Ie7073f450f207e9242b821b4971ce2be89ba6a54
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build] Already built successfuly on CI in MR
- alcatel-idol347: add headphones
- Try to revert playback/capture priorities to maybe make automatic
switching to headphones based on jack detection work a bit better.
[ci:skip-build] Already built successfuly on CI in MR
Also, moving the modemmanager.conf file from the main package to the
nonfree-firmware subpackage as Modem Manager is going to work
only if the nonfree-firmwares are present.
The soc-qcom-sdm845-nonfree-firmware dependency is now moved from
firmware-xiaomi-beryllium package to the device package.
This will make the firmware package to only depend on firmware files.
The soc-qcom-sdm845-nonfree-firmware dependency is now moved from
firmware-oneplus-sdm845 package to the device package.
This will make the firmware package to only depend on firmware files.
The soc-qcom-sdm845-nonfree-firmware dependency is now moved from
firmware-oneplus-sdm845 package to the device package.
This will make the firmware package to only depend on firmware files.
The soc-qcom-sdm845-nonfree-firmware dependency is now moved from
firmware-oneplus-sdm845 package to the device package.
This will make the firmware package to only depend on firmware files.
Also, pmb:cross-native is added to the package options so CI testcases
doesn't fail.
The soc-qcom-sdm845-nonfree-firmware dependency is now moved from
firmware-xiaomi-beryllium package to the device package.
This will make the firmware package to only depend on firmware files.
Also, pmb:cross-native is added to the package options so CI testcases
doesn't fail.
- Add support for the rear camera on xiaomi-scorpio
- Improve charging from SDPs
- Add extcon support on oneplus-oneplus3(t)
- Add container and zram kconfig checks to APKBUILD
[ci:skip-build] Already built successfuly on CI in MR
- update to kernel 5.15.25 stable
- add TUN as module, fixes pma#1435
- drop fully-upstreamed patches (lp55xx)
- add iio support for lis302dl (will send upstream)
- update N900 dts for lis302dl over iio (will send upstream)
- assign higher priority to patches from kernel.org (resolves pmb#2107)
[ci:skip-build] already built successfully in CI
For a merge list, please see the merge commits:
- 5.16.3 - (98fb3b4121)
- 5.16.4 - (2962c41f9d)
- 5.16.5 - (9ee391628f)
Change-Id: If5ba0303b6a9a636ec1f303739804a9fa9c37e2a
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build] Already built successfuly on CI in MR
This is a cherry pick of Leste commit 2c7e4a1ac8ec1f908927793e893566aac3dcb9df,
to revert mainline commit f959dcd6ddfd29235030e8026471ac1b022ad2b0, which breaks
N900 modem. This is a temporary workaround until a proper fix is found.
* upgrade kernel to 5.15.13
* add patch for better nl80211 support in wl1251
* add config options to support iwd
[ci:skip-build] Already built on CI in MR
Due to a regression in ModemManager 1.18.2, a special case to reduce
facility lock query was implemented in ModemManager. Versions up to
1.18.6 need to be patched (separate merge request, possibly in Alpine
Linux). For more details, see pmaports issue #1274.
This udev rule makes use of this special case for device
samsung-serranove.
linux-samsung-espresso3g: Add support for gp2a light and proximity sensor
linux-samsung-espresso3g: Display now runs at 45Hz
linux-samsung-espresso3g: Add pinmux for wlan host wake
linux-samsung-espresso3g: Add TWL 6030 power off support
linux-samsung-espresso3g: Add TWL 6030 power button support
linux-samsung-espresso3g: Data Enable is active high
linux-samsung-espresso3g: Fix patch
