Since it works for linux-postmarketos-stable, I've simply copied over
the config, and ran "pmbootstrap menuconfig" on it again. Then it
worked again in Qemu.
* Add NetworkManager and PulseAudio applets to Plasma
* This crashes plasma mobile on armhf (where it is not usable due
to performance problems anyway), except on mainlined kernels
with hardware accelerated graphics. This is mentioned in the
pkgdesc of postmarketos-ui-plasma-mobile now.
When building device packages, the postmarketos-mkinitfs package gets
installed as dependency of postmarketos-base. It must not try to
create an initramfs at this point, when there is not deviceinfo file.
We build the initramfs during the installation, so it's fine.
Added [skip ci] because linux kernels and KDE updates are currently
getting built for the binary repository (so Travis couldn't finish
anyway).
* Add nonfree_firmware subpackage to all devices, that depend on
nonfree firmware.
* Some packages were depending on `linux-firmware`, but without having
Wifi working. Removed that dependency as it was probably added by
accident. If it was really necessary, chosing the appropriate
split linux-firmware package (e.g. linux-firmware-brcm) is better
anyway (that has been changed recently in Alpine and is possible
now).
* Add a test case that makes sure we don't have firmware depends
without subpackages in device aports anymore.
* device-*: add postmarketos-base to depends
* aportgen: add postmarketos-base to depends
* Add test case
* postmarketos-base: Don't depend on devicepkg
* msm-fb-refresher: Enable service in post-install
It lacked some hardware config, such as the USB switch.
With this change, I was able to SSH over the USB network.
I based this off of LineageOS 14.1's config file from its
build root. I think we were missing the secondary config
file
(TARGET_KERNEL_VARIANT_CONFIG := msm8930_serrano_eur_lte_defconfig
in BoardConfig.mk).
* gp-peak: Add support for osk-sdl
* gp-peak: Move non-kernel files to device-gp-peak
* gp-peak: Add audio support
Manually trigger the udev rules for audio devices and add the default user to the audio group
* Added a ui package for i3wm
* Added n900 specific i3wm config
* Fixed mixed tabs and spaces in i3status.
This is also the first commit made on an n900
running postmarketOS.
* Removed redundant X11
* Use lock.sh to lock the device
* Windows management improvements
* bump pkgver
* Fix device-nokia-n900 checksums
* Fixed path in the i3wm split package
* New "pmbootstrap build --src=/local/source/path hello-world" syntax
* The local source path gets mounted inside the chroot
* From there, a copy of the source code gets created with rsync (so
we can write into the source folder if necessary, for better
compatibility with all kinds of APKBUILDs)
* After the aport gets copied into the chroot before building (as
usually), we extend the APKBUILD with overrides to make it use
mountpoint's source instead of downloading the package's source
from the web as usually
* The package built with the local source gets _pYYYYMMDDHHMMSS
appended to the pkgver
* linux-postmarketos-mainline: use $builddir, fix patch checksum
Binary packages are rebuilding. If your kernel is not rebuilt yet, and
you don't want to build it yourself, just checkout the previous
pmbootstrap commit.
This commit also changes the arch from the postmarketOS kernels from
"all" to the ones where we actually have a kernel config.
Fixes#1229.
We have two methods of cross-compiling:
* native: everything runs with the host architecture, QEMU is not
involved. This is the fastest, but requires the build system to be
working with it. We use this for all linux-* packages currently.
* distcc: everything runs through QEMU emulating the target arch,
*except* for the compiler. This is the most compatible approach
working with all packages.
When compiling `linux-*` packages natively, kernel scripts needed
during the build process get generated. Some of these are C files that
get compiled as executables. In native mode, these get compied to the
native architecture, in distcc mode to the target architecture.
The problem is, that we need these scripts compiled for the target
architecture in the kernel's dev package in order to compile kernel
modules outside of the kernel's package (e.g. wireguard).
It is not possible to just rewrite this logic to generate target-arch
binaries when running in native mode, because these binaries require
musl-dev, linux-headers and some other packages to be installed for the
target architecture inside the native chroot.
We solve this by introducing a new `kernel-scripts` package. which
contains just the binary scripts. In case the dev package was
cross-compiled, it depends on `kernel-scripts` and symlinks these
binaries. The `kernel-scripts` package always gets compiled in distcc
mode since it does not have a `linux-` prefix.
Fixes#1230.
Fixes#1227.
This also updates the hash in linux-postmarketos-mainline, because the
hash changed upstream (they updated their git version server-side?).
This port includes:
* Weston including touch and WiFi (using e.g. firmware-samsung-i9305) works.
* Touchscreen calibration for osk-sdl
* Sound configuration
* Udev rules for touch and pen, pen works!
Closes#441. Adjust bootimg_analyze code:
* Install mkbootimg (which now provides unpackbootimg) instead of
unpackbootimg. In theory, pmbootstrap should recognize this
automatically, however right now it does not yet handle this case.
* The file names of the extracted files have changed.
* Automatically generate a calibration matrix for libinput
This takes the calibration matrix for wayland and divides the pixel
offsets by the device width/height.
* Bump pkgrels of devices using devicepkg-dev
This causes new packages to be generated, using the new devicepkg-dev
version.
The device is Xiaomi Redmi 1S, based on MSM8296 platform, with Qualcomm
Snapdragon 400. The kernel is from lineageOS (3.4.0). Some additional patches
are needed for successful compilation. The screen dimension is 720x1280.
The touchscreen device name is ft5x06_i2c. Use this name for udev
instead of hardcoded device path. Also add a workaround for red
screen weston by setting weston_pixman to 2
The screen doesn't refresh. Enabling msm-fb-refresher as suggested.
Add udev rule to indicate whether the device is in charging state.
Green led indicates that the device is charging, whereas red light
indicates that the device is discharging.
For prima wlan module to work, an initialization procedure is needed (
echo 1 > /dev/wcnss_wlan ), before loading the prima wlan module
(wlan.ko). Also build the prima wlan as module.
Xiaomi Redmi 1S is using pronto wlan module, which needs some firmware
to run. Add the required wifi firmware to enable the wifi interface.
Add an openrc service to load wlan module after wcnss_service is
initialized.
