Commit graph

454 commits

Author SHA1 Message Date
Martijn Braam
9b88689b9d
new device: device-pine-dontbeevil (Don't be evil devkit) (!308)
UART and SSH work and HDMI works in u-boot (just like the pine-a64lts).
It should work now with display and xorg/weston works directly after
installing. Plasma mobile doesn't work directly because both kms and
fbdev are enabled and kms doesn't work yet.

linux-postmarketos-allwinner: update to 5.0.0-rc3 with patches for this
devkit, tested on this device and on pinea64lts (the only other device
using the allwinner kernel).

[ci:skip-build]: won't finish in time
2019-04-11 23:49:03 +02:00
km2
2e9beef9f2
samsung-i9003: support gcc8 (!307)
This patch forces the kernel to compile with gcc8 and includes by
default INSTALL_MOD_STRIP=1.
2019-04-08 20:45:42 +02:00
Tadeo Kondrak
1c4980bda5
htc-m7: new device (HTC One M7) (!306)
usb networking works

echo 100 > /sys/devices/platform/msm_fb.590593/leds/lcd-backlight/brightness
cat /sys/devices/virtual/graphics/fb0/modes > /sys/devices/virtual/graphics/fb0/mode

to get screen working

[ci:skip-build]: already built successfully in CI
2019-04-08 20:40:24 +02:00
Martin Piatka
e4aa322e33
htc-ace: switch to armv7 (!304)
Switches htc-ace to armv7. I was able to boot to xfce and everything
seemed to work fine.

[ci:skip-build]: already built successfully in CI
2019-04-07 16:06:53 +02:00
Nick Reitemeyer
39971739fa
surftab-wintron7.0: new device (TrekStor Surftab wintron 7.0) (!290)
This device is x86_64 and has a 32-bit UEFI, so I need to install
32-bit grub (AFAIK it's the only bootloader capable of loading a 64-bit
kernel from 32-bit).

The grub-efi-x86 package has been generated with pmbootstrap.
2019-04-04 19:58:24 +02:00
Luca Weiss
40d110fcc9 Change default NetworkManager DHCP client to dhcpcd (!278)
Remove the override in ouya-ouya (and in postmarketos-base) and add an
override for raspbery-pi3

Fixes #210
2019-03-29 14:53:47 +01:00
Federico Amedeo Izzo
97fd10aed4
oneplus-bacon: fix incorrect framebuffer refresh rate in Xorg (!294)
After this patch is applied, the phone boots in Xorg UIs like XFCE.

[ci:skip-build]: already built successfully in CI
2019-03-29 10:19:38 +01:00
Federico Amedeo Izzo
1ee8db41db samsung-klte: fix swapped red and blue (!291)
The problem behind swapped red and blue is inverted byte order in
framebuffer driver pixel format.
This patch sets the correct byte order in the framebuffer driver,
solving the swapped red and blue problem.

[ci:skip-build]: already built successfully in CI
2019-03-29 07:23:27 +00:00
Jakub Strzelecki
b19509a8fa
motorola-montana: new device (Motorola Moto G5s) (!286)
Initial starting point to get the device booting. The downstream kernel
repository can be improved, see discussion in the merge request.

[ci:skip-build]: already built successfully in CI
2019-03-29 08:04:13 +01:00
silver
568e035837 galaxy s relay support 2019-03-28 20:51:18 +00:00
Luca Weiss
874a309eed fairphone-fp2: fix swapped red and blue (!292)
Fixes the problem described in #211
2019-03-28 15:06:54 +00:00
Danct12
95198e12e9
xiaomi-santoni: use msm-3.18 upstream kernel (!289)
device-xiaomi-santoni: use mdss-fb-init-hack to refresh the display, and
swapfile to fix "out of memory" when loading proprietary blobs.

I have tested the kernel, USB Networking, Display, USB OTG, Wi-Fi (with
proprietary blobs) works fine, through I haven't figured out how to get
Bluetooth and among of other stuff to work. Audio works. For more
information on how to get Wi-Fi and Audio to work, check out the wiki
page for this device, I have updated it.

[ci:skip-build]: already built successfully in CI
2019-03-26 23:21:06 +01:00
Mis012
481bd4493b
asus-me176c: update kernel repository name (!251)
[ci:skip-build]: building takes longer than one hour
2019-03-25 09:50:30 +01:00
Federico Amedeo Izzo
38dbafb98e
oneplus-one: fix swapped red and blue (!287)
The problem behind swapped red and blue is inverted byte order in
framebuffer driver pixel format.
This patch sets the correct byte order in the framebuffer driver.

The previous workaround patch is removed because it fixes improperly
the red-screen issue, causing the swapped red and blue problem
that this commit solves

[ci:skip-build]: already built successfully in CI
2019-03-25 09:43:16 +01:00
knuxfanwin8
1672f9f5d3
samsung-lt01wifi: new device (Samsung Galaxy Tab 3 8.0) (!283)
[ci:skip-build]: already built successfully in CI
2019-03-20 08:14:38 +01:00
Robert Yang
2651b565e0
linux-ouya-ouya-mainline: Update kernel (!281)
- Initial memory frequency scaling driver
- Enable eMMC 1.8v DDR signaling mode
- Limit CPU frequency to avoid overheating
- Fix crash in xf86-video-opentegra driver

[ci:skip-build]: already built successfully in CI
2019-03-18 07:36:16 +01:00
Federico Amedeo Izzo
eebeb32a6c device-nokia-n900: Increase simple terminal font size to 12 (!280)
Also hardcode st instead of i3-sensible-terminal, because the font
parameter may not work with all terminals, and we want to use st on the
n900 anyway.
2019-03-16 12:47:56 +00:00
Konrad Dybcio
9efaad6d21 firmware: Move fw-sony-amami to fw-sony-rhine (!271)
Rename the firmware so it's clear that it's specific to the platform and
not only the amami device. Sony rhine platform includes as follows:
Xperia Z1 (honami)
Xperia Z1 Compact (amami)
Xperia Z Ultra (togari)
2019-03-12 06:49:09 +00:00
Luca Weiss
7a604328ac
fairphone-fp2: switch to armv7 (!273)
[ci:skip-build]: already built successfully
2019-03-11 09:50:32 +01:00
Michal Guba
3a9ab3c7e6 samsung-klte: Switch to armv7 (!272)
Tested. Works fine on klte. Boots to weston.

[ci:skip-build]: already built successfully
2019-03-11 08:41:05 +00:00
RONTheCookie
bc6d1dae35
lg-d722: new device (LG G3 Beat) (!267)
USB networking is functional.

[ci:skip-build]: already built successfully
2019-03-11 09:09:10 +01:00
Clayton Craft
d5888c52cc
device-purism-librem5dev: Depend on include mesa-purism-gc7000 packages (!236)
This changes the librem5dev package to depend on the new
mesa-purism-gc7000 packages, which provide support for the vivante
gc7000 GPU in this device.

[ci:skip-build]: already built successfully
2019-03-11 08:50:48 +01:00
Robert Yang
e0b9afc15e
device-ouya-ouya: Add Ouya mainline kernel (!269)
[ci:skip-build]: already built successfully in CI
2019-03-10 02:19:57 +01:00
Robert Yang
8f7ee135c3 device-ouya-ouya: Add NetworkManager config (!269)
Makes dhcp work on mainline and downstream kernel.

Disables p2p0 on downstream kernel. This isn't working on either kernel
anyways. It breaks wifi on the downstream kernel.
2019-03-10 02:19:51 +01:00
Robert Yang
e29c8ede3d device-ouya-ouya: Set cooling governor in initfs hook (!269)
This governor is meant for simple on/off cooling fans.
2019-03-10 02:19:51 +01:00
Robert Yang
b567dadd68 New aport linux-ouya-ouya-mainline (!269)
Mainline based kernel for Ouya
2019-03-10 02:19:51 +01:00
Robert Yang
3f07921f5d linux-ouya-ouya: Set wifi firmware path (!269) 2019-03-10 02:19:51 +01:00
Robert Yang
6b7e88b7ed device-ouya-ouya: Add firmware package (!269) 2019-03-10 02:19:51 +01:00
Robert Yang
0b9450abe5 linux-ouya-ouya: Convert to armv7 (!269) 2019-03-10 02:19:50 +01:00
Robert Yang
60f4b70c71 device-ouya-ouya: Convert to armv7 (!269) 2019-03-10 02:19:45 +01:00
Martin Piatka
9150a7c966
htc-ace: patch framebuffer to report refresh rate of 60Hz (!268)
This allows Xorg to configure display mode correctly.

[ci:skip-build]: already built successfully
2019-03-09 22:17:41 +01:00
Konrad Dybcio
3fb645e916 sony-honami: Switch to armv7 (!266)
Tested working on a c6903.

[ci:skip-build]: already built successfully CI
2019-03-09 19:43:36 +00:00
Matthias Berndt
a6c94af6d2
htc-vision: fix on-screen keyboard for full-disk encryption (!259) 2019-03-09 19:53:28 +01:00
Oliver Smith
233a401645
ouya: blacklist partitions to avoid brick (!247)
Thanks to Robert Yang's pmbootstrap patch, we can now avoid flashing
anything to the boot and recovery partition of the Ouya. With this
patch, the latest pmbootstrap will refuse to do so with:

ERROR: 'boot' partition is blacklisted from being flashed! See the Ouya device wiki page for more information.
2019-03-08 07:47:34 +01:00
Federico Amedeo Izzo
c913c48c19
oneplus-bacon: redscreen kernel patch / msm fb refresher (!258)
Applied red screen kernel patch as described in:
https://wiki.postmarketos.org/wiki/Troubleshooting:display

Effectively fixes the red screen on Weston. Added msm-fb-refresher to
APKBUILD to fix display refreshing.

The display now works properly in Weston, but unfortunately the screen
is blue in Plasma Mobile, and X11 crashes in XFCE.

[ci:skip-build]: already built successfully in CI
2019-03-07 10:40:09 +01:00
foldedcascode
e1dda38396
lg-hammerhead: switch arch to armv7 (!257) 2019-03-07 10:34:09 +01:00
Pedro Ângelo
9c2ce7b1a1
asus-grouper: update kernel wifi firmware path (!252)
[ci:skip-build]: already built successfully in CI
2019-03-05 09:34:26 +01:00
Pedro Ângelo
454b28e421 asus-grouper: create nonfree firmware subpackage (!252)
With this firmware I can connect to my AP using wpa_supplicant, ping
servers and fetch files normally. However the driver also brings up the
p2p0 interface on boot and it seems to conflict with wlan0. So to test
the wireless we need to disable p2p0 and stop the wpa_supplicant service
(because it attaches itself to p2p0 on boot):

$ sudo ip link set p2p0 down
$ sudo rc-service wpa_supplicant stop
$ wpa_passphrase <your ESSID> <your password> > ./wpa_config
$ sudo wpa_supplicant -B -Dnl80211 -iwlan0 -c./wpa_config
$ sudo udhcpc -i wlan0
$ ping postmarketos.org
PING postmarketos.org (188.166.143.8): 56 data bytes
64 bytes from 188.166.143.8: seq=0 ttl=42 time=41.604 ms
64 bytes from 188.166.143.8: seq=1 ttl=42 time=56.022 ms
64 bytes from 188.166.143.8: seq=2 ttl=42 time=54.911 ms
64 bytes from 188.166.143.8: seq=3 ttl=42 time=54.241 ms
...
$ sudo apk update
fetch http://postmarketos.brixit.nl/armhf/APKINDEX.tar.gz
fetch http://dl-cdn.alpinelinux.org/alpine/edge/main/armhf/APKINDEX.tar.gz
fetch http://dl-cdn.alpinelinux.org/alpine/edge/community/armhf/APKINDEX.tar.gz
fetch http://dl-cdn.alpinelinux.org/alpine/edge/testing/armhf/APKINDEX.tar.gz
v20190228-49-gbc0f9441b0 [http://dl-cdn.alpinelinux.org/alpine/edge/main]
v20190228-41-g6ee930cc6c [http://dl-cdn.alpinelinux.org/alpine/edge/community]
v20190228-48-g67283cdbf6 [http://dl-cdn.alpinelinux.org/alpine/edge/testing]
OK: 13694 distinct packages available
2019-03-05 09:32:50 +01:00
Robert Yang
d079a3d0de
linux-samsung-p4wifi: Update to linux v5.0 and switch to armv7 (!254)
[ci:skip-build]: already built successfully in CI
2019-03-05 09:20:40 +01:00
Robert Yang
ebfbbacefd
device-samsung-p4wifi: Switch to armv7 (!254) 2019-03-05 09:18:34 +01:00
Robert Yang
24f7935c06
device-samsung-p4wifi: Change name of dtb to tegra20-p4wifi (!254) 2019-03-05 09:18:03 +01:00
Robert Yang
f49cab175e
device-samsung-p4wifi: Make sound input work (!254)
ALSA configs are created based on downstream driver code and wm8994
datasheet.
2019-03-05 09:18:03 +01:00
Robert Yang
bf9b3875a1
device-samsung-p4wifi: Add more mesa-grate subpackage dependencies (!254) 2019-03-05 09:17:58 +01:00
Pedro Ângelo
81cee38610
asus-grouper: modernize device package (!253)
Updated the device-asus-grouper package to use devicepkg-dev.

I've tested the resulting image and it builds, boots and has a working
touchscreen (in Weston)

I've also noticed that the device reboots itself at times, both in the
USB ssh console and in Weston. This seems to be a known issue but I
don't know how prevalent it was before.
2019-03-04 09:47:49 +01:00
Clayton Craft
20e1366cc4 device/device-purism-librem5dev: add support for using uuu flasher (!245) 2019-03-02 10:43:26 -08:00
Clayton Craft
2a678ef435 device/u-boot-librem5dev: Use defconfig compatible with uuu (!245)
The defconfig required for using the uboot image with uuu is different,
since it required the DDR training to be built into the image itself.
2019-03-01 16:53:33 -08:00
Clayton Craft
e4d9e37fda device/u-boot-librem5dev: update m4 image (!245)
The old image is no longer available
2019-03-01 16:53:33 -08:00
Bhushan Shah
f6c9cbdcc1 u-boot-librem5dev: add !tracedeps in options (!245)
it allows native cross-compile to be used.
2019-03-01 16:53:33 -08:00
Sergey Larin
98197693f5
samsung-i927: switch to armv7 (!238)
Since mesa-grate is armv7 now, we can switch too.

[ci:skip-build]: already built successfully in CI
2019-02-28 15:22:56 +01:00
Sergey Larin
16b3556ffa
samsung-i927: disable BPFILTER (!238)
I don't know why build fails on gitlab, I have not changed anything
in kernel. Anyway, I don't remember why I enabled this, so I guess it's safe
to disable this option.
2019-02-28 15:22:20 +01:00