CRDA in the kernel requires a regulatory database to be available
to configure the WiFi card correctly following the regulations in
each possible environment.
Add post-upgrade file with a warning, so we don't symlink it to the
post-install script.
[ci:skip-vercheck]: no need to rebuild the package
Related: build.postmarketos.org#85
Remove devmappings service. The original purpose of this service was to
ensure that /boot is mounted properly after the initramfs passed control
to OpenRC, because the initramfs used to umount /boot before that. With
/etc/fstab alone, /boot get not get mounted with subpartitions (which we
use on Android devices), if util-linux >= 2.33 was installed (MR 115).
Nowadays, we don't umount /boot in the initramfs before passing control
to OpenRC anymore (MR 1398). So this service isn't needed anymore, and
prevented the previous pmOS_inst_boot <> pmOS_boot patch from working
correctly.
This adds sleep-inhibitor as a dependency when elogind is present, and
installs a conf for it with some plugins enabled that are beneficial to
devices running pmOS. The elogind suspend hook is dropped.
This resolves issues where suspend is aborted in the hook *after*
PrepareForSleep is sent over dbus (which might cause some things to
disable radios/modems, etc for suspend).
The 'period' in the conf is in minutes, a value of 0.1 is 6 seconds,
which seems reasonable for releasing the lock when conditions for
inhibiting no longer apply, without spinning the CPU too frequently.
Do not change config files in post-install scripts anymore (with sed
commands or by other means). Instead, ship the files inside the packages
and use "replaces", so apk allows the package to overwrite files from
other packages:
https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#replaces
Notes on specific files:
* /etc/elogind/logind.conf: original file only consists of commented out
compile defaults. Copy them over for now. In the future we should be
able to install our own config into a .d directory, without all the
comments: 8358fc5950
* /etc/fstab: original file only has /dev/cdrom and /dev/usbdisk
entries, which are not useful for postmarketOS:
https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/alpine-baselayout/APKBUILD
* /etc/motd: reformat the text, add link to the chat
* /etc/conf.d/syslog: original file only contained 'SYSLOGD_OPTS="-t"',
make the override file as if the sed statement from post-install was
executed
* /etc/wpa_supplicant/wpa_supplicant.conf: post-install script touches
this file. We probably added it back in 2017 in relation to enabling
D-Bus (though the PR does not mention it explicity), but at least with
the current init.d script of NetworkManager, we can simply have '-u' in
wpa_supplicant_args:
https://github.com/postmarketOS/pmbootstrap/pull/578https://gitlab.alpinelinux.org/alpine/aports/-/blob/master/main/wpa_supplicant/wpa_supplicant.initd
* /etc/sudoers: base on original /etc/sudoers, but remove all the
commented out stuff except for the visudo note at the top. We could
also put a file in /etc/sudoers.d, but since the wheel line is present
in the original /etc/sudoers and only commented out, it would be kind
of unexpected to enable it in a file in /etc/sudoers.d. I prefer this
stripped down version of the file, that is easy to read.
Refactor the install code to be generic, so we only need to add the new
path in one place when adding a new file. Put the full path into the
filename to make this possible.
I've tried to mimic the final directory structure in the aport first
(e.g. $pkgdir/sbin/swapfile -> main/postmarketos-base/sbin/swapfile),
but that leads to conflicts as abuild only takes the filename for
checksums (conflict with etc/conf.d/swapfile):
https://gitlab.alpinelinux.org/alpine/abuild/-/issues/10013
We don't really need checksum verification for the files shipped in the
same directory (not downloaded), but nevertheless this is a bug. It
leads to confusing behavior and might be fixed by letting abuild demand
that there is only one source file with the same name, as I suggested in
the issue linked above. So let's avoid this altogether with the flat
file name.
Pressing power button should not power off a device. Although it is
expected on desktops and laptops, it isn't expected on phones and
tablets. Instead it should just turn off the screen or go into a deep
sleep, but that isn't handled by elogind. So let elogind just ignore the
button altogether.
Also re-order the dependencies alphabetically while we're touching the
package anyway
Only add a comment, do not try to mount the root or boot partitions
anymore. The initramfs is doing this already.
Related: https://postmarketos.org/fstab
Get rid of the "write_unless_modified" code, which was supposed to only
change /etc/fstab, /etc/issue, /etc/motd if the user did not modify it.
This is nice in theory, but we have a bug report where the code did not
do what it should (apk audit possibly failed due to a qemu bug?), and
then it lead to strange bugs related to not having the expected
/etc/fstab installed.
Fixes: #661, #258
These dependencies don't belong here.
- iw: should be installed by the user themselves when wanted
- nano: should be installed by the user themselves when wanted
- pulseaudio: should be installed by the UI meta packages that need it
instead
- pulseaudio-alsa: should automatically be installed when both
PulseAudio and alsa are installed
https://gitlab.alpinelinux.org/alpine/aports/merge_requests/4820
Comment out the initstepslew line in /etc/chrony/chrony.conf.
initstepslew can delay booting while chrony sets the time. The
makestep 1 -1 line in the configuration also causes chrony to step
the time (whenever the offset is greater than 1s), making
initstepslew redundant.
On some devices a getty should run on the serial console.
Configure the getty by setting the deviceinfo_getty variable. The
format is "<port>;<baud rate>". For example, "ttyS0;115200".
A post-installation trigger in postmarketos-base checks
/etc/deviceinfo, and modifies /etc/inittab if the device should run
a getty.
Fix wifi on htc-ace by properly setting nl80211 before wext.
/etc/conf.d/wpa_supplicant is supposed to get modified twice with the
current code in the post-install file. The first one was patched
recently to set nl80211 before wext, but that change does not work in
practice, for two reasons:
1. The code block does not even get executed, because apk reports that
/etc/conf.d/wpa_supplicant was already modified (by a package that
was installed before, in its post-install script? I could not find
out which one does that though).
2. Even if it worked, the second code block would revert the change and
put wext before nl80211 again.
Fix this by removing the first code block, and changing the order in the
second one. Make it easier to catch such errors in the future, by
printing, which files get modified, or get skipped. Set "#!/bin/sh -e",
so the script can not fail silently.
When doing pmbootstrap -y zap and then pmbootstrap install, the output
looks like this:
(141/151) Installing postmarketos-base (3-r26)
Executing postmarketos-base-3-r26.post-install
- Modifying: /etc/fstab
- Modifying: /etc/issue
- Modifying: /etc/motd
- Modifying: /etc/conf.d/syslog
- Modifying: /etc/conf.d/wpa_supplicant
- Modifying: /etc/sudoers
- Modifying: /etc/chrony/chrony.conf
On some devices (mainly the ones that uses wcnss-wlan), there is another
interface beside wlan0, which is p2p0. It is used for Wi-Fi Direct, but
beside that, this might also cause confusion to other users as well. And
also you cannot connect into any network with this interface.
This script triggers late initialization of some platform
drivers that cannot be probed at boot time, because for
example they use firmware blobs on partitions that are
not mounted during early kernel startup.
Disabled by default, can be enabled on per-device basis.
Later conf files override earlier ones. With this change, device specific
packages can ship their own NetworkManager configs that override the
postmarketos config.
Example: 10-samsung-p4wifi.conf would override 00-postmarketos.conf
When util-linux v2.32 updated v2.33, remounting a partition stopped
working.
mount -n -o remount,rw /
mount: /: can't find LABEL="pmOS_root".
This service will add the pmOS rootfs partitions to device mapper so that
the remount root partition will succeed.
Fixes issue #156
* Travis and Coveralls badges
* aports: instead of <https://github.com/postmarketOS>, use
<https://postmarketos.org>
* References to full URLs to issues and pull requests replaced with
a hash and the number
* grsec check: simplify error message, remove link to github issue
(nobody is using that anymore anyway)
While this feature is nifty, it doesn't really work with most mobile
wireless drivers. Wireless drivers decide to go in "weird" state when
the mac address changes at runtime.
I remember talking to someone in IRC about this and getting it disabled.
not sure how this ended up here.
See: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/1681513
This option is not working with most of the wireless drivers normally.
For example e.g it doesn't really play nice with one of my laptop's
wireless driver.
The postmarketos-base package used to make the user part of the "video"
and "audio" groups. However, this did not work reliably, and we were
adding the "wheel" group in "pmbootstrap install" anyway.
Now all groups get added in "pmbootstrap install", and the names of the
groups have been moved to `pmb.config.install_user_groups`.
* device-*: add postmarketos-base to depends
* aportgen: add postmarketos-base to depends
* Add test case
* postmarketos-base: Don't depend on devicepkg
* msm-fb-refresher: Enable service in post-install
* gp-peak: Add support for osk-sdl
* gp-peak: Move non-kernel files to device-gp-peak
* gp-peak: Add audio support
Manually trigger the udev rules for audio devices and add the default user to the audio group
* Allow to specify a custom username in "pmbootstrap init"
* Build chroots have "pmos" instead of "user" as username now
* Installation user UID is 1000 now (as in all other Linux distributions)
* Adjust autologins
* postmarketos-base: enable wheel group for sudo, removed previous sudoers file
* Implement safe upgrade path:
We save the version of the work folder format now, in $WORK/version.
When this file does not exist, it defaults to 0.
In case it does not match the currently required version
(pmb.config.work_version), then ask the user if it should
automatically be upgraded.
* apkindex:
* Also parse the architecture field
* symlink_noarch_package:
* Renamed to symlink_noarch_packages
* Always work on all packages (so we don't need to guess which
subpackages have been generated after a certain build)
* Get invoked when running 'pmbootstrap index'
* Use 'apk index' to generate one index, where the architecture
does not get rewritten (abuild does that by default, due to
Alpine's repos not having a 'noarch' folder and diverging from
that doesn't make things easier for us). That goes super fast,
and then we know which packages are noarch packages and can
create the symlinks.
* Made output less verbose:
* Use -q for 'apk index' when calling it directly (when it gets
called by abuild we can't control that)
* Output that the APKINDEXes get reindexed only to the 'pmbootstrap
log'.
