According to
https://source.puri.sm/Librem5/linux/-/issues/303#note_160864 enabling
the modem power management results in a unreliable modem, but more power
savings.
With power management on the modem can disconnect at any time,
including during calls. This makes the Librem 5 a very bad phone.
Instead let's ensure it works as a phone with a semi-reliable modem
(there is still the sleep/resume issue
https://source.puri.sm/Librem5/linux/-/issues/423) at the cost of
battery life.
As the Librem5's battery life is already poor, a little bit worse
isn't much different. Either way you need an external battery pack.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[ci:skip-build] already built successfully in CI
I unset CONFIG_ARM64_PTR_AUTH_KERNEL because the i.MX 8 CPU in the
Librem 5 doesn't support features from ARMv8.1-A and above anyway.
Same rationale applies to CONFIG_ARM64_TLB_RANGE being unset.
The google-dru package provides the linux-postmarketos-rockchip as a
kernel and supports linux-firmware-ath10k linux-firmware-rockchip
packages as additional non-free firmware.
Enable the ATH10K kernel module in the kernel config
config-postmarketos-rockchip.aarch64 to enable wifi on devices such as
the Acer Chrometab 10.
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[ci:skip-build]: already built successfully in CI
Add the missing kernel.release file to support packaging and fix builds
with:
`pmbootstrap build --envkernel linux-postmarketos-rockchip`
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Fixes this failure on a new install:
ERROR: postmarketos-ui-xfce4-0.5.1-r11.post-install: script exited with error 1
[ci:skip-build]: already built successfully in CI
This port has been compatible with GPU-accelerated UIs like Phosh and
Plasma Mobile for quite a while now. Enable these UIs in the
`pmbootstrap init` menu.
See #1939.
If pbsplash is running when a display manager starts it often causes
issues as display managers want to run on a particular VT, but are
unable to switch the active VT since pbsplash has exclusive control of
the framebuffer.
Making DMs not start until after local would solve the issue but
it would also needlessly delay the boot process.
Until we have a better way to detect display managers starting and react
to it, this will at least get devices working again. Though due to how
openrc resolves service start order it may mean the splash is killed
earlier than necessary.
This enables the DRAM frequency stats driver that can be useful for debugging
issues with the PinePhone. This came up in a discussion in #pinephone on IRC
where megi was helping a pmos user with idle power draw issues.
This also enables the performance, powersave and userspace devfreq governors.
Ref: 8bfd4858b4
[ci:skip-build]: already built successfully in CI
Store the full kernel config instead of a fragment, so
"pmbootstrap kconfig check" can properly verify that all required kernel
options are there. Without this, it would fail an upcoming check for
BINFMT_ELF and BINFMT_SCRIPT:
https://lists.sr.ht/~postmarketos/pmbootstrap-devel/patches/38508
With the full config, pmbootstrap found that ANDROID_PARANOID_NETWORK
was enabled while it should be disabled, so disable it.
Fix the mediatek drvgen related build failure with
00_disable_drvgen.patch from linux-wiko-ufeel and including cust.dtsi:
https://wiki.postmarketos.org/wiki/Porting_to_a_new_device#Removing_python2_dependency
[ci:skip-build]: already built successfully in CI
These directories should also trigger a rebuild so that any changes are
reflected in the initramfs.
This will include things like 'files', 'modules' and so on that weren't
previously triggering rebuilds of the initramfs...
[ci:skip-build]: already built successfully in CI
This gets rid of the Tux army on bootup. While it hurts my soul,
removing Tux from bootup makes it less flickery.
[ci:skip-build]: already built successfully in CI
6.1 was not a valid kernel version causing the wlan module installed
into wrong location. 6.1.0 would be correct. Fix that
problem by upgrading to 6.1.12 and make the wlan installation
more robust.
[ci:skip-build]: already built successfully in CI
This is no longer used by anything in pmOS as far as I can tell. One
previous user, ttyescape, has been reworked to use hkdm instead, and the
other previous user, charging-sdl, is no longer available in pmOS.
Closes https://gitlab.com/postmarketOS/pmaports/-/issues/1929
This modifies to the postmarketOS ramdisk init to use the new pbsplash
tool for displaying splash messages, replacing the old fbsplash.
This also moves the show_splash call to run as soon as possible rather
than waiting for mount_subpartitions to run (which can take a while).
Closes https://gitlab.com/postmarketOS/pmaports/-/issues/1936
Additionally, this means that iio-sensor-proxy actually gets enabled
on GNOME and GNOME mobile. Previously, it would get installed there
but not enabled unless the user manually did it.
Otherwise we don't have any document viewer installed by default.
[ci:skip-vercheck]: pkgrel bump is not necessary when changing
recommends.
[ci:skip-build]: already built successfully in CI
