Only temporarilly. This is in pmb_recommends, so does not need pkgver
bump. We can swap them back once it's built for armv7 in alpine, but
it's now blocking all MRs from merging.
[ci:skip-vercheck]
Reading the `ifname` of a gadget that has not been configured with a UDC
succeeds with the content `(unnamed net_device)` instead of failing.
So we need to explicitly check that a UDC was configured before we read
the interface name.
Ref: #2648
[ci:skip-build]: already built successfully in CI
Reading the `ifname` of a gadget that has not been configured with a UDC
succeeds with the content `(unnamed net_device)` instead of failing.
So we need to explicitly check that a UDC was configured before we read
the interface name.
Ref: #2648
A number of fixes:
- oem-amd-nonfree-fw no longer exists from c6306cb9b, and the fw here is
pretty much required for the device to be useful so it's added to
"depends=".
- drops the -vulkan subpackage since oem-amd-vulkan is doing the same
thing.
- force rootfs partition resize on boot, else the rootfs is too small
- disable unudhcpd, usb networking isn't working, and we don't need to
run it on any dedicated eth device
- use kernel with Valve's out of tree patches, to improve stability /
usefulness of device
fixes#2630
[ci:skip-build] already built successfully in CI
There are some important platform drivers that Valve has not upstreamed,
that are basically required for this device to operate well. I picked
those patches from the kernel tree they released for 6.5, and rebased
them onto 6.8.
Our config.txt is replaced (mv'ed to config.txt.old, maybe by alpine's
initramfs-generator?) and so our configuration does not have an
effect. Put our config stuff in usercfg.txt instead, which is included
by config.txt.
Fixes: https://gitlab.com/postmarketOS/pmaports/-/issues/2471
[ci:skip-build]: already built successfully in CI
Our config.txt is replaced (mv'ed to config.txt.old, maybe by alpine's
initramfs-generator?) and so our configuration does not have an
effect. Put our config stuff in usercfg.txt instead, which is included
by config.txt.
Also update vmlinuz name, should be vmlinuz-rpi and not vmlinuz-rpi4.
Name of package in aports is linux-rpi these days. linux-rpi provides
linux-rpi4 for backward compatibility, so depending on linux-rpi4
still works, but lets use real package name so that it is easier to
find.
Sometimes, there can be more than 10M of stuff collected for logging,
which breaks things.. bump the size to 32M which should still be small
enough for low end / old devices.
Signed-off-by: Caleb Connolly <caleb@postmarketos.org>
These are now provided by linux-firmware-brcm, which subsequently causes
a conflict between these packages. Fix it by removing the symlinks from
the device package.
Closes https://gitlab.com/postmarketOS/pmaports/-/issues/2616
[ci:skip-build]: already built successfully in CI
Changes:
- use msm-firmware-loader
- use soc-qcom-msm8953
- cleanup firmware package
- add tqftpserv as a dependency for modem
- add modules-initfs with panel and touchscreen modules
[ci:skip-build]: already built successfully in CI
Since kernel 6.5 (I believe) the ucm config
need to be adjusted because the mic way too
sensitive. The other party hears a freight
train riding rails that are almost
perpendicular ...
This is an attempt to get the mic to work nicely.
[ci:skip-build]: already built successfully in CI
Makes modem work on fairphone-fp4 (sm6350/sm7225) and fairphone-fp5
(sc7280/qcm6490)
Patches are submitted upstream:
https://github.com/andersson/tqftpserv/pull/13
[ci:skip-build]: already built successfully in CI
A bunch of override files in postmarketos-base-ui-plasma seem to have come from the plasma-mobile ui package, which probably shouldn't be on desktop and bigscreen.
With Plasma 6, a lot of the overrides are now no longer necessary for Plasma Mobile.
Situation with each file:
- 000-gschema.override - This likely was for changing maliit themes and GTK title bar layout for Plasma Mobile, maliit theming was dropped (https://github.com/maliit/keyboard/pull/108), and title bar layout is now handled within Plasma Mobile
- kdeglobals - This was for setting the look-and-feel on Plasma Mobile and default browser, it's now handled within Plasma Mobile envmanager
- kwinrc - These were settings for disabling window decorations and setting the vkbd to maliit, which is now handled in Plasma Mobile envmanager
- kscreenlockerrc - This is to autolock the screen after login (tinydm autologs in), the file was for Plasma Mobile, I don't think we want it for Desktop since SDDM is used there
Drop duplicated dependencies, which have been already included
in postmarketos-base-ui-plasma:
- dnsmasq
- elogind
- elogind-openrc
- polkit-kde-agent-1
[ci:skip-build]: already built successfully in CI
Unfortunately we cannot get to a getty shell unless we also run:
setenv SWITCH_SEL 3
from the SBL shell. Furthermore, actually getting kernel output
requires setting console=ttySAC2,115200.
SWITCH_SEL might be related to the "MUIC" of the device, but the
variable also controls whether or not it is possible to get serial
output from pads on main board, and seems weird that those pads are
affected by MUIC (unless pads are also behind MUIC, but seems like
that would be very annoying when developing the device)
See also initial MR where mainline support for i9100 was added, where
serial output is also discussed:
https://gitlab.com/postmarketOS/pmaports/-/merge_requests/1598#how-to-get-serial-output
[ci:skip-build]: already built successfully in CI
All of Plasma Bigscreen was removed from aports[1]. It will return with
KDE 6.1, according to PureTryOut. But for now, disable this package by
making it build on no architectures so that CI works again.
[1]: 4e7fa26ea2
[ci:skip-vercheck]: Version does not need to change when changin arches.
