Due to an issue, probably in bluez, the bluetooth service often fails to
start on boot. Restarting the service later make bluez start correctly.
While adding the service supervisor for just this issue isn't a great
solution, in any case having a supervisor on such an important system
service is good, and it fixes this issue also by restarting the
bluetooth service after the first failure on boot.
May 30 08:05:56 fairphone-fp4 daemon.info bluetoothd[1420]: Bluetooth daemon 5.66
May 30 08:05:56 fairphone-fp4 daemon.err bluetoothd[1420]: src/main.c:main() Unable to get on D-Bus
Also while we're editing the list of subpackages make sure they're
ordered alphabetically.
[ci:skip-build]: already built successfully in CI
Since codeaurora.org has been shut down and this project seemingly
hasn't been migrated to git.codelinaro.org, let's switch to a source
found on GitHub.
USB tethering allows users to use their phone's WiFi or WWAN interface
as an access point for the device they connect the phone with over USB.
This way, they can use their data plan with a laptop or desktop when
regular Internet access is absent.
Configure NetworkManager to manage the usb0 iface from initfs so users
can configure it in GNOME Settings or KDE. Include a NetworkManager
dispatcher script as well to handle postmarketOS' setup with unudhcpd as
we want to provide an SSH login over USB when tethering is disabled. If
tethering is enabled, unudhpcd is stopped and its functionality is taken
over by NetworkManager through an instance of dnsmasq. NetworkManager
will also configure the necessary settings to allow IP forwarding and
firewall rules during tethering. Once disabled, NetworkManager cleans up
these settings and our dispatcher script starts unudhcpd again.
Due to upstream changes, NetworkManager requires networkmanager-dnsmasq
subpackage as dependency as dnsmasq needs DBus support for
NetworkManager. Without it, NetworkManager will silently fail spawning
dnsmasq instances.
[ci:skip-build]: already built successfully in CI
GNOME Console can now launch command-line applications from .desktop
files, so they are no longer "useless" in Phosh.
gnome-extensions-app hasn't been pulled in automatically in Phosh for
long. If users install this manually, it would be confusing for it to
not show up. The app itself has an error message that explains they
need to be logged into GNOME for it to work when launched in e.g.
Phosh, so I think that should take care of UX concerns. Additionally,
this package is installed in gnome-mobile as well, where
gnome-extensions-app actually is useful.
firefox-safe-mode has been removed in Alpine:
- https://git.alpinelinux.org/aports/commit/community/firefox?id=438ee43621e1a83c8309bf7e5e14ba9fce0532ff
- https://git.alpinelinux.org/aports/commit/community/firefox-esr?id=0f324c8b39ab08cc3f504e4ae959425bec472791
Considering all of this, postmarketos-hidden-desktop-entries no longer
serves a purpose, so let's remove it.
All Asteroid apps are launched with the "invoker" which needs the
booster running. Make sure this happens when the UI starts.
Alternatively we could use superd to launch it but for a single
executable this is good enough for now.
0.8.1:
Fixes:
- get_free_space: always return an integer (MR 31)
0.8:
Features:
- Add support for gummiboot
- Many internal code improvements and bug fixes, see git log for
details
Fixes:
- Fix destination space calculation (MR 28)
- Support destination paths with spaces
[ci:skip-build] already built successfully in CI
Needed by GNOME Software since
https://gitlab.alpinelinux.org/Cogitri/apk-polkit-rs/-/merge_requests/45
GNOME Software is often installed in GNOME UI's through pmb_recommends,
but it's not a dependency in any way. To avoid spilling this service
enablement everywhere, add just the openrc subpackage from the daemon.
That means that if GNOME Software is not installed or gets uninstalled,
the daemon will crash on startup. That should not be a big deal though.
[ci:skip-build] already built successfully in CI
This uses a dispatcher script to configure filtering A and AAAA records
based on which IP versions are routable on the NM primary connection.
gojq is preferred over the 'standard' jq because it's considerably
faster... the dispatcher script took 0.89s on my L5 with jq, and 0.07s
with gojq. the difference is probably greater on slower phones... so it
seemed worth installing it.
fixes#1430
Co-authored-by: Arnavion <me@arnavion.dev>
As a preparation for #1836, move the sourcing of deviceinfo to its own
function. This should allow to have a single point in the whole of the
initramfs for the sourcing of the deviceinfo, instead of every script
that needs it sourcing it. This allows to change the way deviceinfo is
sourced in the future with a lot less effort.
It has been dropped from Alpine due to being unmaintained and it's
dependencies not building against the latest kmime (23.04) anymore
[ci:skip-vercheck]
[ci:skip-build]
We need to tell openrc-settingsd which ntp service to use, otherwise
it'll default to busybox ntpd which we don't want.
Additionally make sure openrc-settingsd service gets launched at boot
with the post-install/post-upgrade script.
[ci:skip-build]: already built successfully in CI
deviceinfo allows to disable the framebuffer which automatically
skips the splash on boot. Honor this setting as well for the shutdown
splash. Also honor the PMOS_NOSPLASH cmdline parameter as well.
[ci:skip-build]: already built successfully in CI
We removed the "install_if" of the APK plugin on GS so that one could
use GNOME Software exclusively for flatpak
[ci:skip-vercheck]
[ci:skip-build]: already built successfully in CI
sudo-ldap is providing cmd:sudo/sudo-virt.
Replace files from sudo-ldap to solve conflict about /etc/sudoers
Fixes#2032
[ci:skip-build]: already built successfully in CI
Initial commit of the librem5-agps scripts from Purism. These are used
to manage the Librem5 GNSS and download AGPS data.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
[ci:skip-build] already built successfully in CI
Soon openrc-settingsd (hostnamed) will uses these properties so the
information can be exposed to apps like GNOME Settings.
Let's also move the shellcheck comment to the outer scope, otherwise
we'd need four of these comments now, and let's not use ${} but just $.
Bugfix release, nothing major though. Full changelog:
https://gitlab.com/postmarketOS/postmarketos-mkinitfs/-/tags/2.1.1
Note: git was dropped as a makedepends because it's not actually
needed... I forgot that I could just set VERSION at build time. Oops.
[ci:skip-build] already built successfully in CI
This is a revert of the change introduced in 4eda0715 to support an
uncompressed initramfs-extra. osk-sdl support results in an initramfs-extra
that is too big for some devices with a small (traditional) /boot partition
Also see: https://gitlab.com/postmarketOS/pmaports/-/issues/2009
[ci:skip-build]: Already built successfully in CI
Changes the dependency from pmos-mkinitfs to pmos-initramfs, so now the
dependency chain for boot config packages is:
base -> postmarketos-initramfs -> postmarketos-mkinitfs -> boot-deploy
Sorting dependencies this way makes sense because "base" just needs an
initramfs, it doesn't care about the implementation (that currently uses
"postmarketos-mkinitfs.")
[ci:ignore-count]
[ci:skip-build] already successfully built in CI
- Move base files/modules out of package, this package now only provides
the mkinitfs tool.
- Add all required modules, these were copied over from
postmarketos-mkinitfs and sorted
- Use new exe name in trigger
- Update triggers to ignore /etc, add /usr/share/mkinitfs. No packages
should be installing into /etc/mkinitfs/
- Support building/installing docs
- Add vendored deps
- Change trigger path
This package contains base file and module lists for the initramfs /
initramfs-extra archives, along with the init.sh
The primary reason for doing this is so that changes to these
files/lists can be properly versioned (in pkgver), and (re)building
mkinitfs itself is no longer required for these changes.
- Add base file list for initramfs. The dirs at path
/usr/share/postmarketos-mkinitfs/* are "new" in mkinitfs 2.0
- Install default modules to /usr/share
- Install system config to /usr/share/mkinifs
- Add base files for -extra archive
- Create user config dirs
- Update hook dirs in init.sh, change from mkinitfs 2.0
- Remove splash images, obsolete since pbsplash
- Support uncompressed initramfs-extra
This is a dummy package that other packages can install_if on to install
the appropriate camera app for the device/UI. It's intended to be added
to pmb_recommends= for pmos-ui-* packages that want to have a camera by
default.
This contains an OpenRC service that clears the RTC wake alarm.
Users who don't want the RTC wake alarm to power on their phone from
powered-off state can use this service to clear the alarm during shutdown.
Fixes#1970
[ci:skip-build] already built successfully in CI
Fixes this failure on a new install:
ERROR: postmarketos-ui-xfce4-0.5.1-r11.post-install: script exited with error 1
[ci:skip-build]: already built successfully in CI
If pbsplash is running when a display manager starts it often causes
issues as display managers want to run on a particular VT, but are
unable to switch the active VT since pbsplash has exclusive control of
the framebuffer.
Making DMs not start until after local would solve the issue but
it would also needlessly delay the boot process.
Until we have a better way to detect display managers starting and react
to it, this will at least get devices working again. Though due to how
openrc resolves service start order it may mean the splash is killed
earlier than necessary.
