* Initial Mozilla Flame packages
* Update dtbtool to use LineageOS upstream
* Use mkbootimg --dt flag only when deviceinfo_bootimg_qcdt is defined
* Update mkbootimg to use LineageOS upstream
* Add sparse image flashing on device-mozilla-flame
* Only support SD card install on Mozilla Flame
* Remove useless profile.sh on mozilla flame
* Package DTBs in /usr/lib/linux-mozilla-flame/
* Build and install modules in linux-mozilla-flame
* Partially resolve#338: Configfs network setup was broken
* Ignore shellcheck warning
...because if we do what shellcheck recommends here, we end up with
exactly the code which we're reverting in this PR.
Thanks to Pablo Castellano and Martijn Braam!
In postmarketOS we are now able to generate system images with the
correct configuration so that they can boot already using qemu
This commit brings the `pmbootstrap qemu` action.
This command is very handy because you don't have to set all the
qemu parameters, pmbootstrap does it for you.
* device-qemu-vexpress: Added kernel command line according to wiki
* qemu: Added workaround for image writing permissions
* qemu: Added support to launch postmarketOS in a QEMU virtual machine
- Support for emulating these architectures in QEMU: arm, aarch64, x86_84
- Generate QEMU command correctly depending no guest architecture (arm/x86)
- Run QEMU in the same architecture as the host by default
- Refactoring in pmb.parse.arch and pmb.qemu.run
- Raise exception if DTB file or system image are not present
- Display more useful information when something fails (e.g. image not found)
- Run qemu version depending on arch (host or argument), not device configured
* device-qemu-amd64: set deviceinfo_kernel_cmdline to "PMOS_NO_OUTPUT_REDIRECT"
* qemu: added --memory argument to specific guest RAM
* device-qemu-amd64: adjusted deviceinfo_kernel_cmdline (console=tty1)
* Added /etc/network/interfaces for qemu-amd64
* qemu: Added KVM support if /dev/kvm if present
* Specify separate machines for architecture
* qemu: Check if QEMU is installed instead of crashing
* Added graphics driver to qemu-aarch64
- Use arm (as used in qemu) instead of armhf (used in Alpine)
- qemu argument is -dtb
- Follow same style to build the command + arguments
* qemu: Added SSH port redirection: ./pmbootstrap.py qemu -p 2222
libstdc++.a from gcc-armhf was not reproducible on Travis (it was, when built locally!). These .a files are just archives of object files .o, and in this case it was caused by a random order of the .o files in the archive.
This PR patches the package() function of the APKBUILD when running pmbootstrap aportgen gcc-armhf (same for aarch64 of course), to extract all .a files, and repack them to be reproducible (by sorting the files before packing them).
As usually, we can still inherit everything from the upstream gcc aport from Alpine, and apply our changes on top of that.
Travis without the patch:
https://api.travis-ci.org/jobs/260402679/log.txt?deansi=true
> CHALLENGE FAILED for usr/armv6-alpine-linux-muslgnueabihf/lib/libstdc++.a:File 'usr/armv6-alpine-linux-muslgnueabihf/lib/libstdc++.a' is different!
Travis with the patch (I've instructed Travis to run off this branch to test it):
https://api.travis-ci.org/jobs/260806203/log.txt?deansi=true
> Done. Your build exited with 0.
* Automatically compute the minimum size for the partitions
* Automatically resize the pmOS_root partition during the boot process
* Resize root partition only if there is unallocated space at the end of the device.
* Added more echos to make debugging easier while looking at the pmOS_init.log.
* Updated static_code_analysis.sh script to run shellcheck with `-x` option.
* Packaged libsparse
libsparse from the Android project provides multiple tools like img2simg
and simg2img.
These are used to split a large image for the system partition into
separate smaller chunks with sparse headers
This is required for several devices (at least bullhead, fp2 and titan)
because it fixes the "Invalid sparse file format at header magi" error
https://github.com/postmarketOS/pmbootstrap/issues/299
* Added new variable deviceinfo_flash_sparse (fixes#299)
Right after the system image is generated, pmbootstrap checks this
variable. In case it is true, run img2simg on it
* motorola-titan: enable deviceinfo_flash_sparse
* libsparse: use source from github: anestisb/android-simg2img
It is not that easy to use the upstream archive because everytime
you download it, the files have the current date as creation date
and that makes the file have a different checksum every download
https://github.com/postmarketOS/pmbootstrap/pull/303#issuecomment-319017197
Per the APKBUILD reference, , package *-install scripts should be checksummed to guard against incomplete/corrupt downloads. The postmarketos-base package is one example where this is not being implemented currently.
Having it in boot doesn't actually work, the service is being started
too early and fails. This change moves it to the default runlevel. This
change also removes "wifi-handler" since that service doesn't actually
exist.
This updates the linux-postmarketos kernel to 4.12.4, and fixes an issue
where the APKBUILD was pulling down the 4.12 source but not the 4.12.x
patches. I think that pulling down the major.minor source and a sep.
package for patches to update to the major.minor.minor(er?) release adds
unnecessary complexity since kernel.org already hosts the sources with
these patches applied (e.g. in this case the 4.12.4 source)
@VictorNine did the port, all credit goes to him (and @drebrez and everyone else who helped him)!
* Added device HTC Ace (#181)
* Add HTC Desire HD (Ace) device-specific and kernel package
* Enable kernel virtual terminal support
* Added touchscreen device rules
* Added linux-firmware pkg. WIFI is now working
* device-htc-ace: Add deviceinfo_flash_offset_base
Huge thank you to @drebrez for his amazing work on this PR!
* Add generation of initramfs-extra with additional binaries
Extract both initramfs with `pmbootstrap initfs extract`
Add new splashscreens for missing partitions/files errors
Changes in init script:
- use busybox findfs applet to find boot partition
- mount boot partion
- extract initramfs-extra
- show error splashscreens accordingly and loop forever
- start usb unlock directly from unlock_root_partition (hook removed)
* Print out a text message for serial debugging in case of errors
Add initramfs-extra files to `pmbootstrap initfs ls` output
* Fix trailing whitespace in comment...
* ls: Indicate which initramfs we're looking at / add wiki link
I've rewritten the initramfs-development article to reflect the
changes made in this PR. It will be a good read for someone who
extracted the initramfs and wants to know why we have two files.
* postmarketos-splash: change arch from "all" to "noarch"
* lg-mako: use .tar.gz instead of .zip (because that's the reference
APKBUILD)
* #220: Allow specifying multiple packages for checksum, build,
aportgen
* #239: Add chroot shortcuts (--rootfs and --buildroot)
* Show chroot and command before entering chroot
This enables the busybox syslog implementation, which logs to
/var/log/messages, on boot. This is very helpful for debugging
applications which write to syslog (e.g. NetworkManager)
syslog is being set up to log to shared memory (not to disk), so log is
lost 1) on reboot and 2) if the service is restarted. It can be read
with `logread`
The creates the linux-postmarketos package which for now supports the n900 (and probably the other maemo devices) and qemu with the vexpress-a9 machine simulation.
I've put the generated dtbs in /usr/share/dtb for now and set the dtb field in the deviceinfo for the n900 and my new qemu device.
* Introduced linux-postmarketos-omap
* Unified kernel progress
* Created kernel bootable with qemu
* Updated n900 deviceinfo for generic kernel
* Changed qemu device to vexpress
* Updated APK comments and added linux-postmarketos-dev package
* Append dtb in mkinitfs
* Fixed bootscript on n900 for the generic kernel
* Don't detect double flavors with -dtb appending
* Added graphics drivers for vexpress (qemu)
* Added more drivers for qemu
This adds virtio network support in qemu for the vexpress-a9 machine.
The keyboard and mouse don't work yet.
You can boot into weston if --no-fde is specified
Thanks, craftyguy!
- UI is selectable with `pmbootstrap init`. Currently only 'weston' and 'none' are options. It'll automatically pick up any new `postmarketos-ui-*` packages added at later dates.
- splits off weston packages install from postmarketos-base and puts
them into postmarketos-ui-weston. Also note that NO weston packages are
installed by "pmbootstrap install" by default unless the user selects a ui in the `init`
- configuration of weston is now in postmarketos-ui-weston.
- the demos have been spun off to `postmarketos-demos`, and `postmarketos-ui-weston` lists this package as a dependency.
Thanks, Martijn Braam!
* Made postmarketos-mkinitfs use postmarketos-splash to generate splash images
* Added screen sizes to all deviceinfo files
* Bumped pkgrel for all device packages
100% tested. Assuming that you don't need to test an obvious change,
because it only changes one line is dangerous. I will learn from this,
sorry for the inconvenience.
`gcc-armhf` compiles fine again with that change, and it is able to
cross-compile packages as it used to.
