Utilize msm-firmware-loader for minimize device specific
firmware package.
Add necessary modules to initramfs for fix fde.
Use soc-qcom-msm8953-modem and soc-qcom-msm8953-initramfs as a dependency.
ERROR: the source file 'WCNSS_qcom_wlan_nv.bin' has different checksums in the following files:
- device/testing/firmware-samsung-j5/APKBUILD: 742ee81d034116cf1ecdfae5f75495e6b10ce5be0c2a999b6c8a2c161b1da8b48d6810d5405edb8c829b96fdf75e45a565c74963c76d1bca4aaedf28572fa91f
...
Fix this by setting a different target filename in the package you modified:
https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#source
[ci:skip-build]: already built successfully in CI
Now that the modem firmware is installed in the referenced location, the
firmware patch is not needed, so remove that as well.
Also backport a fix for the Pixel 3a XL so a kernel upgrade isn't needed
for that.
Fixes broken fde as reported in https://gitlab.com/postmarketOS/pmaports/-/issues/2314.
Both Tianma and EBBG variant use the upstream touchscreen drivers in 6.5.
Add them to the initramfs as it was missed when upgrading to 6.5 kernel release.
[ci:skip-build] already built successfully in CI
Provide common board-2.bin file, extended from linux-firmware.
This file will be temporarily provided and dropped once all devices
are added to upstream linux-firmware's board-2.bin file.
Provide common board-2.bin file, extended from linux-firmware.
This file will be temporarily provided and dropped once all devices
are added to upstream linux-firmware's board-2.bin file.
Provide common board-2.bin file, extended from linux-firmware.
This file will be temporarily provided and dropped once all devices
are added to upstream linux-firmware's board-2.bin file.
Without qcom,board-id and qcom,msm-id we need to use header version 2,
otherwise the device doesn't boot.
[ci:skip-build]: Already built successfully in CI
Add rt5033 modules to initfs for the following devices, to unlock FDE with
USB OTG keyboards:
- Samsung Galaxy Ace 4
- Samsung Galaxy Core Prime
- Samsung Galaxy Grand Prime
- Samsung Galaxy S4 Mini Value Edition
[ci:ignore-count]
[ci:skip-build]: already built successfully in CI
Add rt5033 modules to initfs for the following devices, to unlock FDE with
USB OTG keyboards:
- Samsung Galaxy A3/A5/A7
- Samsung Galaxy E7
- Samsung Galaxy Grand Max
- Add support for upower, in order to enable automatic shutdown when battery is
critically low
- Set UPower PercentageLow threshold to 10% so it triggers even when fuel gauge
is not calibrated (see estimations provided in 4b54fc7f83:
"linux-postmarketos-omap: add N900 battery capacity estimation")
The display panel for these devices was upstreamed and now uses a
different name. Update it so the display is loaded properly.
[ci:skip-build]: already built successfully in CI
Provide a rough battery capacity estimation for the bq27200 fuel gauge inside
Nokia N900. This is useful when the fuel gauge is out of calibration and a
learning cycle cannot take place due to broken USB/charging port on the device.
[ci:skip-build]: Already built successfully in CI
motorola-surnia also supports the inx panel as of Linux 6.3, add it to
the initfs so the display can be initialized early.
There is no tianma panel for surnia (only for harpia) so drop that.
It's not clear why it was there in the first place.
[ci:skip-build]: Already built successfully in CI
With the udev rule in that package feedbackd can start using the
vibration motor for haptics.
Also we can remove the direct swclock-offset dependency since the soc
package depends on that also.
[ci:skip-build]: already built successfully in CI
It seems like the driver name has changed *again* in 6.5.x kernels, so
let's just have both drivers in the initramfs to help with migrating
between newer/older kernels and any future flip/flopping of drivers.
This is a bit of a hack... it works because missing modules are not
fatal for mkinitfs. The reason why they aren't fatal is that whether or
not it's builtin is somewhat arbitrary... there's an open issue[1] for
mkinitfs to make this smarter, i.e. throw an error if the .ko doesn't
exist AND it's not builtin for the *installed* kernel.
When that's implemented then this patch would likely result in mkinitfs
failing on this device because one of those drivers may not be installed
or builtin. I don't have time to implement this in mkinitfs, so adding
this crude workaround of just including both seemed like a reasonable
thing to do since the 6.5 kernel will break fde on this device (this has
happened before).
[ci:skip-build]: already built successfully in CI
Add an initial port for the Fairphone 5 smartphone. This includes
firmware and close-to-mainline kernel package.
[ci:skip-build]: Already built successfully in CI
With IPA active, the device hangs shortly after booting into the rootfs
(the initramfs shell is fine as far as I can tell). Blacklisting it
works around this for now.
This is a regression, and did not happen when the device originally was
introduced.
[ci:skip-build]: already built successfully in CI
With IPA active, the device hangs shortly after booting into the rootfs
(the initramfs shell is fine as far as I can tell). Blacklisting it
works around this for now.
This is a regression, and did not happen when the device originally was
introduced.
