A common issue is that building kernels takes longer than the default of
1h, and then MR authors need to adjust the timeout in their pmaports
fork and run it again. By setting this option this is hopefully no
longer the case.
I set it to 10h because that's what we currently have set in the
postmarketOS gitlab configuration and it would allow building MRs for
service packs with multiple kernels.
pmbootstrap has logic built in to detect stale builds - by default it
will stop a build if there was no output for 15 minutes. So having a
large timeout shouldn't be a problem.
The AF8133J magnetometer is being used since the PinePhone Beta edition
in place of the earlier ST LIS3MDL magnetometer.
[ci:skip-build] Already built successfuly on CI in MR
The touchscreen currently is on i2c-gpio due to issues with the hardware
i2c. Include the module in initfs so the touch driver probes and is
usable in osk-sdl.
[ci:skip-build]: already built successfully in CI
Enable:
* CONFIG_UINPUT required by fbkeyboard
* CONFIG_PSTORE_PMSG required to enable dmesg/console ramoops
Co-Authored-By: Oliver Smith <ollieparanoid@postmarketos.org>
[ci:skip-build]: already built successfully in CI
UPower defaults to HybridSleep mode when battery is critical.
Since we allow suspending the device in regular use, this approach
won't help in a critical battery case scenario. When the battery
level is critical, shutdown the device instead.
Moreover, adjust the default levels for battery low, critical, critical
action since they are too high for SDM845 devices.
vc4 and freedreno have been provided by mesa-dri-gallium for a long
time.
mesa-dri-intel subpackage has been deprecated for a while (previously
dependend on dri-classic and dri-gallium)
mesa-dri-classic drivers is removed because mesa upstream has removed
those old drivers from the tree. They've been replaced (for not-ancient
hardware) by gallium.
See also https://gitlab.alpinelinux.org/alpine/aports/-/merge_requests/31848
Alpine does not use setup-udev anymore and provides the same
functionality through setup-devd. The setup-udev script was deleted [1]
but postmarketos-base still used it and caused pmbootstrap to fail when
building a device image. Use the rc-service setup directly from
setup-devd.
[1] b56c4c2b9d
Fix the following error:
ERROR: unable to select packages:
libstdc++-11.2.1_git20220219-r4:
breaks: g++-aarch64-11.2.1_git20220219-r3[libstdc++=11.2.1_git20220219-r3]
satisfies: gcc-11.2.1_git20220219-r4[so:libstdc++.so.6]
binutils-2.38-r3[so:libstdc++.so.6]
ccache-4.6.1-r0[so:libstdc++.so.6]
gcc-11.2.1_git20220219-r4:
breaks: g++-aarch64-11.2.1_git20220219-r3[gcc=11.2.1_git20220219-r3]
The new version does not seem to be in the armhf repos yet so skip that
one for now.
