As with the firmware commit, no effort is done to keep firmware packages
working with downstream kernel.
[ci:skip-build]: already built successfully in CI
Package adsp, modem and wifi firmware for mainline. Compatibility with
downstream firmware is not kept on purpose, if somebody wants this,
please make some subpackage for it!
Tested on the V0.2 variant of the hardware which comes with some U-Boot
build preinstalled. I don't know if this will be the case for the final
version that will be shipped to customers, but the announecment would
imply so given that it says the device "incorporates a advanced [sic]
BIOS compatible with UEFI".
[ci:skip-build]: already built successfully in CI
This includes the "Alta" and "Solitude" boards, the latter of which I
also introduce a device package for in a later patch. It should be easy
to introduce support for the former, but I don't have the hardware to
test that on.
The two new patches have been merged and will be included in Linux 6.7
as I understand.
Due to symlinks from linux-firmware-ath10k apk is now pulling in
linux-firmware-qcom which already provides a630_sqe.fw.
Since this file is not device/vendor-specific we can really use the file
from linux-firmware and not provide our own. For the record,
a619_gmu.bin also shouldn't be device-specific but currently
linux-firmware doesn't provide that one.
Also just pulling linux-firmware-qcom for this tiny file is pretty space
inefficient but due to the symlink dependency mentioned above, just
removing this file for now from the firmware package removes the file
conflict reported by apk:
ERROR: linux-firmware-qcom-20230919-r1: trying to overwrite lib/firmware/qcom/a630_sqe.fw owned by firmware-fairphone-fp4-adreno-20230215-r1.
[luca: update commit message to reflect dependency situation, update
packaging code a bit]
I cannot maintain this device because I do not have it, but it is
similar to the Pixel 3a, which I can maintain.
Move the kernel into a subpackage in case support for a different panel
(the Tianma NT37700F panel) is added.
[ci:skip-build]: already built successfully in CI
* Add kernel modules for display to modules-initfs
* Add GPU firmware and dependency for Vulkan
* Add qbootctl to mark the current A/B slot as successful
* Add bootmac to set the Bluetooth MAC address on boot
[ci:skip-build]: already built successfully in CI
Kconfig changes:
* Enable PWM_CLK and INPUT_PWM_VIBRA instead of INPUT_CLK_VIBRATOR for
Nexus 5
* Disable unused clock drivers
* Disable MEDIA_SUPPORT - currently unused
* Enable LEDS_TRIGGER_PATTERN for feedbackd
* Disable all of NET_VENDOR_* (which is Ethernet devices)
[ci:skip-build]: already built successfully in CI
It utilize msm-firmware-loader for minimize device specific firmware package.
It add necessary modules to initramfs for fix fde.
modem package has been removed in favor of soc-qcom-msm8953-modem.
30-gpu-firmware-files has been removed.
[ci:skip-build]: already built successfully in CI
It utilize msm-firmware-loader for minimize device specific firmware package.
It add necessary modules to initramfs for fix fde.
modem package has been removed in favor of soc-qcom-msm8953-modem.
30-gpu-firmware-files has been removed.
Depend on soc-qcom-msm8953-modem and initramfs.
Add necessary modules to initfs for fix touchscreen under fde.
[ci:skip-build]: already built successfully in CI
This release includes security fixes.
Changes:
- 161e7f1ed3
- ba16d92aa0
Change-Id: Ibf3c6871cbe044f23091ccfe8a03869d38fb3851
Signed-off-by: Alexander Martinz <amartinz@shiftphones.com>
[ci:skip-build]: Already built successfully in CI
It add necessary modules to intramfs for fix fde.
modem package has been removed in favor of soc-qcom-msm8953-modem.
30-gpu-firmware-files has been removed in favor of
soc-qcom-msm8953-initramfs.
[ci:skip-build] already built successfully in CI
It utilize msm-firmware-loader for minimize device specific firmware package.
It add necessary modules to intramfs for fix fde.
modem package has been removed in favor of soc-qcom-msm8953-modem.
30-gpu-firmware-files has been removed.
It utilize msm-firmware-loader for minimize device specific firmware package.
It add necessary modules to initramfs for fix fde.
modem package has been removed in favor of soc-qcom-msm8953-modem.
pointercal, fb.modes, 30-gpu-firmware-files has been removed.
Utilize msm-firmware-loader for minimize device specific
firmware package.
Add necessary modules to initramfs for fix fde.
Use soc-qcom-msm8953-modem and soc-qcom-msm8953-initramfs as a dependency.
ERROR: the source file 'WCNSS_qcom_wlan_nv.bin' has different checksums in the following files:
- device/testing/firmware-samsung-j5/APKBUILD: 742ee81d034116cf1ecdfae5f75495e6b10ce5be0c2a999b6c8a2c161b1da8b48d6810d5405edb8c829b96fdf75e45a565c74963c76d1bca4aaedf28572fa91f
...
Fix this by setting a different target filename in the package you modified:
https://wiki.alpinelinux.org/wiki/APKBUILD_Reference#source
[ci:skip-build]: already built successfully in CI
Now that the modem firmware is installed in the referenced location, the
firmware patch is not needed, so remove that as well.
Also backport a fix for the Pixel 3a XL so a kernel upgrade isn't needed
for that.
Fixes broken fde as reported in https://gitlab.com/postmarketOS/pmaports/-/issues/2314.
Both Tianma and EBBG variant use the upstream touchscreen drivers in 6.5.
Add them to the initramfs as it was missed when upgrading to 6.5 kernel release.
[ci:skip-build] already built successfully in CI
Provide common board-2.bin file, extended from linux-firmware.
This file will be temporarily provided and dropped once all devices
are added to upstream linux-firmware's board-2.bin file.
Provide common board-2.bin file, extended from linux-firmware.
This file will be temporarily provided and dropped once all devices
are added to upstream linux-firmware's board-2.bin file.
Provide common board-2.bin file, extended from linux-firmware.
This file will be temporarily provided and dropped once all devices
are added to upstream linux-firmware's board-2.bin file.
Without qcom,board-id and qcom,msm-id we need to use header version 2,
otherwise the device doesn't boot.
[ci:skip-build]: Already built successfully in CI
Add rt5033 modules to initfs for the following devices, to unlock FDE with
USB OTG keyboards:
- Samsung Galaxy Ace 4
- Samsung Galaxy Core Prime
- Samsung Galaxy Grand Prime
- Samsung Galaxy S4 Mini Value Edition
[ci:ignore-count]
[ci:skip-build]: already built successfully in CI
Add rt5033 modules to initfs for the following devices, to unlock FDE with
USB OTG keyboards:
- Samsung Galaxy A3/A5/A7
- Samsung Galaxy E7
- Samsung Galaxy Grand Max
- Add support for upower, in order to enable automatic shutdown when battery is
critically low
- Set UPower PercentageLow threshold to 10% so it triggers even when fuel gauge
is not calibrated (see estimations provided in 4b54fc7f83:
"linux-postmarketos-omap: add N900 battery capacity estimation")
The display panel for these devices was upstreamed and now uses a
different name. Update it so the display is loaded properly.
[ci:skip-build]: already built successfully in CI
Provide a rough battery capacity estimation for the bq27200 fuel gauge inside
Nokia N900. This is useful when the fuel gauge is out of calibration and a
learning cycle cannot take place due to broken USB/charging port on the device.
[ci:skip-build]: Already built successfully in CI
motorola-surnia also supports the inx panel as of Linux 6.3, add it to
the initfs so the display can be initialized early.
There is no tianma panel for surnia (only for harpia) so drop that.
It's not clear why it was there in the first place.
[ci:skip-build]: Already built successfully in CI
With the udev rule in that package feedbackd can start using the
vibration motor for haptics.
Also we can remove the direct swclock-offset dependency since the soc
package depends on that also.
[ci:skip-build]: already built successfully in CI
It seems like the driver name has changed *again* in 6.5.x kernels, so
let's just have both drivers in the initramfs to help with migrating
between newer/older kernels and any future flip/flopping of drivers.
This is a bit of a hack... it works because missing modules are not
fatal for mkinitfs. The reason why they aren't fatal is that whether or
not it's builtin is somewhat arbitrary... there's an open issue[1] for
mkinitfs to make this smarter, i.e. throw an error if the .ko doesn't
exist AND it's not builtin for the *installed* kernel.
When that's implemented then this patch would likely result in mkinitfs
failing on this device because one of those drivers may not be installed
or builtin. I don't have time to implement this in mkinitfs, so adding
this crude workaround of just including both seemed like a reasonable
thing to do since the 6.5 kernel will break fde on this device (this has
happened before).
[ci:skip-build]: already built successfully in CI
